Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 2007193-1 is a SIGNAL terminal with SOLDER type, made of NICKEL SILVER ALLOY. It operates b/w -55°C to 105°C, accommodating wire sizes up to 0 AWG. Ideal for assembly products requiring reliable signal connections in various temperature environments.
Median Price
$14.810
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$14.170
100+ parts
$12.540
1k+ parts
$11.450
10k+ parts
-
Mouser Electronics
$10.860
$10.300
DigiKey
$10.865
$9.093
Master Electronics
$12.050
$10.390
Verical
$15.508
Nova Conductors
$10.465
Vyrian
VNN
Electro Sonic
$10.590
$8.290
A2Z Electronics, Inc.
Aztec Data Supply Inc.
$3.370
Semicontronic
$10.240
$9.984
$9.933
Continental Prestige Electronics
$10.251
$10.046
Kepictronics
Argo Parts USA
Bastille Electronics
Solder terminals provide a secure and reliable connection for wires, ensuring the stability and longevity of the assembly product.
With a high maximum operating temperature, this assembly product can withstand a wide range of environmental conditions without compromising performance.
The low minimum operating temperature ensures that this assembly product remains functional even in extremely cold environments, making it versatile for various applications.
Supporting up to 0 AWG wire size allows for compatibility with a wide range of wire gauges, making this assembly product suitable for a variety of wiring configurations.
The signal design ensures that the assembly product is specifically tailored for signal transmission applications, delivering precise and reliable signal connectivity.
The use of nickel silver alloy in the construction of this assembly product provides enhanced durability and corrosion resistance, ensuring a longer lifespan and consistent performance.
Assembly Products 2007193-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Connector Accessory Type:
Design:
Material:
Maximum Operating Temperature:
Minimum Operating Temperature:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
PCN Design/Specification - Plating chg 21/MAR/2023
PCN Packaging - Multiple Devices 28/Aug/2016
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
AWM-12S
Amphenol
CONNECTOR ACCESSORY;
W3P-1939
TE Connectivity's W3P-1939 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125°C, it supports up to 0 AWG wire size. Made of POLYBUTYLENE TEREPHTHALATE, it's ideal for various applications requiring robust electrical connections.
593
Keystone Electronics
Keystone Electronics 593 CONTACT features FEMALE gender, RIGHT ANGLE mounting, and RND PIN-SKT style. Made of STEEL with 0.12" terminal length. Ideal for assembly products requiring SOLDER terminals in various applications.
12124582
Delphi Connection Systems
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Minimum Cable Entry: .075 inch; IEC Conformity: NO; Additional Features: CONTACT FINISH: TIN;
SSF-21T-P1.4
J S T Mfg
SSF-21T-P1.4 by J S T Mfg is a CSA and UL approved CRIMP terminal connector with 2.1" min cable entry, -40 to 105°C temp range, ideal for 22-18 AWG wires in power applications. Featuring a FEMALE contact gender, PHOSPHOR BRONZE material, and 7A rated current capacity for reliable connections.
1766274-1
TE Connectivity's 1766274-1 is a male power contact with copper alloy material, rated for 200A current. It has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting and accommodating up to 0 AWG wire sizes.
1727040098
Molex
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1SNK908302R0000
Abb
CONNECTOR ACCESSORY; Rated Current: 57 A; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel; Wire Gauge (AWG): 0;
M23053/5-106-0
Sumitomo Electric Industries
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
216-206
Wago
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: FERRULE; Maximum Wire Size: 14 AWG;
SPH-004T-P0.5S
SPH-004T-P0.5S by J S T Mfg is a CRIMP terminal CONTACT with FEMALE gender and STRAIGHT mounting style. It features SQ PIN-SKT contact style made of BRASS, ideal for assembly products requiring reliable connections in various applications.
16-02-0088
1-640415-1
TE Connectivity 1-640415-1 is a nylon plug housing with -55 to 105 °C operating temp range. It's used for keying plugs and supports up to 0 AWG wire size, ideal for assembly applications.
194340001
Molex 194340001 CONTACT features CRIMP terminal type, suitable for POWER design with 10 AWG wire size. Rated for 40A current at 500V DC voltage, it has a contact resistance of 30 mohm. Ideal for applications requiring FEMALE contacts with operating temperatures from -40 to 125 °C.
350689-1
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Maximum Cable Entry: .1 inch; Design: POWER; Minimum Cable Entry: .04 inch;
SK14
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Material: STEEL; Assembly Item Name: CLAMPING ITEM; Maximum Cable Entry: .551 inch; DIN Conformity: NO; Mounting Option-1: M4;
0460-010-20141
TE Connectivity's 0460-010-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 16-18 AWG wires at 7.5A current. Ideal for male connectors in straight mounting applications.
DF3-22SCF
Hirose Electric
DF3-22SCF by Hirose Electric is a female contact with bellowed type, made of phosphor bronze. It has a finish thickness of 39.4 and terminal length of 0.108 inch. This assembly product is used for crimp terminals in straight mounting applications.
964972-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel;
1SNK900618R0000
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYCARBONATE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 110 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
2007198-1
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG; Material: NICKEL SILVER ALLOY; Minimum Operating Temperature: -55 Cel;
2007390000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY;
2007215-1
TE Connectivity's 2007215-1 is an SFP SMT connector with compliant fit terminals. It operates b/w -55°C to 105°C, suitable for various applications. The cage assembly is made of nickel silver alloy and supports wire sizes up to 0 AWG.
2007169-1
CONNECTOR ACCESSORY; Terminal Type: COMPLIANT FIT; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: NICKEL SILVER ALLOY;
2007263-1
TE Connectivity's 2007263-1 features COMPLIANT FIT terminals, operating from -55°C to 105°C. Ideal for CAGE ASSEMBLY, it supports up to 0 AWG wire size with NICKEL SILVER ALLOY material.
2007464-2
TE Connectivity's 2007464-2 is an SFP+ SMT connector with COMPLIANT FIT terminals. It operates b/w -55°C to 105°C, made of NICKEL SILVER ALLOY, and supports up to 0 AWG wire size. Ideal for SIGNAL applications like CAGE ASSEMBLY in Assembly Products.
2007174-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
2007254-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Usage: SFP SMT CONNECTOR; Material: NICKEL SILVER ALLOY; Maximum Wire Size: 0 AWG; MIL Conformity: NO;
2007132-1
CONNECTOR ACCESSORY; Terminal Type: COMPLIANT FIT; Maximum Wire Size: 0 AWG; Assembly Item Name: CAGE ASSEMBLY; DIN Conformity: NO; IEC Conformity: NO;
2007194-1
CONNECTOR ACCESSORY; Terminal Type: SOLDER; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; DIN Conformity: NO;
2007251-1
CONNECTOR ACCESSORY; Material: NICKEL SILVER ALLOY; Terminal Type: COMPLIANT FIT; Assembly Item Name: CAGE ASSEMBLY; IEC Conformity: NO; Maximum Wire Size: 0 AWG;
2007198-2
CONNECTOR ACCESSORY; Maximum Operating Temperature: 105 Cel; Terminal Type: COMPLIANT FIT; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel; Assembly Item Name: CAGE ASSEMBLY;
2007135-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Approvals (V): UL; Terminal Type: COMPLIANT FIT; Material: NICKEL SILVER ALLOY; Assembly Item Name: CAGE ASSEMBLY;
2007170-1
The TE Connectivity 2007170-1 is a SFP SMT connector with UL approval. It has a compliant fit terminal type and a max operating temperature of 105°C. The min operating temperature is -55°C. It is an assembly item called the CAGE ASSEMBLY and has a max wire size of 0 AWG. The connector accessory type is CONNECTOR ACCESSORY and it is made of NICKEL SILVER ALLOY.
2007178-1
CONNECTOR ACCESSORY; Design: SIGNAL; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Maximum Operating Temperature: 105 Cel; Terminal Type: COMPLIANT FIT;
2007180-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Terminal Type: COMPLIANT FIT; Design: SIGNAL; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG;
2007181-1
CONNECTOR ACCESSORY; Terminal Type: COMPLIANT FIT; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG; Material: NICKEL SILVER ALLOY; Wire Gauge (AWG): 0;
2007194-2
CONNECTOR ACCESSORY; Material: NICKEL SILVER ALLOY; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG; Terminal Type: SOLDER;
2007180-2
CONNECTOR ACCESSORY; Maximum Operating Temperature: 105 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Material: NICKEL SILVER ALLOY; Terminal Type: COMPLIANT FIT;
2007667-5
Assembly Items; Minimum Operating Temperature: -55 Cel; Material: NICKEL SILVER ALLOY; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG; Terminal Type: COMPLIANT FIT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved