Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 163083-7 is a crimp terminal with stranded construction, suitable for 16-18 AWG wires. It has a rated current of 13A and can handle temperatures from -50 to 150°C. Ideal for power and signal applications in discrete wire assemblies with female contacts.
Median Price
$1.644
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.070
100+ parts
$2.217
1k+ parts
$1.930
10k+ parts
-
TE Connectivity
$3.120
$2.890
$2.720
$2.550
Arrow
$1.302
Verical
Chip1Stop
$1.050
Nova Conductors
$1.300
TME
$1.670
Vyrian
NAC Semi
$1.240
VNN
LIBRA Elektronik GmbH
Semicontronic
$0.890
$0.868
$0.863
Argo Parts USA
Aztec Data Supply Inc.
$2.770
Perfect Parts
GreenTree Electronics
Eastek
$0.240
Abacus Technologies
Assy Fe
Infinite Electronics LLP (Excess)
EMSNET (Excess)
The 30 finish thickness provides durability and protection, ensuring a long-lasting and reliable connection.
Crimp terminals are known for their secure and stable connection, ideal for high-performance applications.
The high maximum operating temperature allows for use in a variety of environments without compromising performance.
Suitable for 16 AWG wire gauge, this product is designed to handle moderate current levels efficiently.
With a rated current of 13 A, this contact is capable of handling power and signal transmission effectively.
Assembly Products 163083-7 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
163083-7 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - Multiple Devices Drawing Correction 29/Jun/2015
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DF13-2630SCFA(41)
Hirose Electric
CONNECTOR ACCESSORY;
1SET111003R0000
TE Connectivity 1SET111003R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 18 AWG wire gauge, ideal for DISCRETE WIRE applications. With a max operating temp of 105°C, it features a STRAIGHT mounting style.
12010300
Aptiv
7824.6925.0
Molex
3-2198618-7
TE Connectivity's 3-2198618-7 BACKSHELL is an assembly product with a shielding feature. It has shell sizes of 4 and can accommodate wires up to 0 AWG. Made of ABS material, it offers mounting options with screws (#4-40).
50147-8100
The Molex 50147-8100 is a crimp terminal contact designed for the 52266 series connector. It features a min wire size of 22 AWG and max wire size of 20 AWG, with a contact gender of male. This assembly item has a mounting style of straight and contact design as blade pin-skt, made from phosphor bronze material.
249-119
Wago
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKER CARRIER; IEC Conformity: NO;
C88E0002181
Northern Technologies
CONNECTOR ACCESSORY; Mounting Option-1: 4-40; Usage: CM CONNECTOR; Assembly Item Name: COVER ITEM; Mounting Option-2: SCREW; IEC Conformity: NO;
08-70-0069
Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.
13697409
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: CONTACT; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Cable Entry: .075 inch;
0460-204-0490
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
08-70-1039
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
FI-C3-A1-15000
Japan Aviation Electronics Industry
FI-C3-A1-15000 by Japan Aviation Electronics features crimp terminal type, operating temp -40 to 80°C, and contact resistance of 40 mohm. Ideal for signal applications with wire sizes ranging from 32 to 28 AWG, rated current of 1A, and female contact gender.
880810-1
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: BOOT; Maximum Wire Size: 0 AWG;
02-08-2004
Molex 02-08-2004 is a CRIMP FEMALE CONTACT with STRAIGHT MOUNTING STYLE. Made of BRASS, it features SQ PIN-SKT CONTACT STYLE. Ideal for assembly products requiring secure electrical connections in various applications.
205090-1
205090-1 by TE Connectivity is an assembly product used in AMPLIMITE applications. It has a finish thickness of 50, terminal type of crimp, and can operate b/w -55 to 125 °C. It is designed for signal transmission with a max rated current of 7.5 A and can accommodate wire sizes ranging from 24 AWG to 20 AWG.
VN020160002(1)
Amphenol's VN020160002(1) features crimp terminal type, 600V AC/DC voltage rating, and 14A current. Ideal for applications requiring stamped contact design, with wire sizes ranging from 26-16 AWG. Suitable for use in environments with temperatures b/w -40 to 125°C.
08-55-0124
Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.
WP-2S
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Material: POLYETHYLENE;
1062-16-0122
TE Connectivity's 1062-16-0122 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 125°C, it is ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
163084-1
TE Connectivity 163084-1 is a crimp terminal with stranded construction, suitable for wire gauges 15-18 AWG. It has a rated current of 13A and can handle temperatures from -55 to 90°C. Ideal for power and signal applications, it features a female contact with square pin-socket design made of brass material.
163081-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Material: BRASS; IEC Conformity: NO; Maximum Operating Temperature: 90 Cel; Minimum Cable Entry: .078 inch;
1630160001
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY;
163085-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Mounting Style: STRAIGHT; Terminal Type: CRIMP; Cross Section Area: .5 mm2; Design: POWER AND SIGNAL;
163084-2
TE Connectivity 163084-2 is a CRIMP terminal with STRANDED construction for wire gauges 15-18 AWG. Rated for 13A current, it's ideal for POWER AND SIGNAL applications in cables up to 0.098" entry. Made of BRASS, it operates b/w -55°C to 150°C temperatures.
163082-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 150 Cel; Mounting Style: STRAIGHT; Wire Gauge (AWG): 16; Additional Features: TERMINATION: GOLD FLASH;
163086-1
CONNECTOR ACCESSORY; Rated Current: 13 A; IEC Conformity: NO; Minimum Cable Entry: .043 inch; Maximum Wire Size: 20 AWG; Maximum Operating Temperature: 90 Cel;
163090-2
CONNECTOR ACCESSORY; Rated Current: 13 A; MIL Conformity: NO; Minimum Operating Temperature: -55 Cel; Cross Section Area: .2 mm2; Finish Thickness: 30;
163085-9
TE Connectivity 163085-9 is a male contact with crimp terminal type for power and signal applications. It has a rated current of 13A, suitable for wire gauge AWG 20 to 24. The contact is made of brass with a stranded construction and can operate b/w -55°C to 90°C.
163088-2
TE Connectivity 163088-2 is a crimp terminal with stranded construction. It has a rated current of 13A and can accommodate wire sizes from 24 to 20 AWG. Ideal for power and signal applications, it features a female contact gender and brass material for durability.
163082-1
TE Connectivity 163082-1 is a male contact with crimp terminal type for wire assembly. It has a cross section area of 1.5 mm2, suitable for 16-18 AWG wires, and can handle up to 13A current. Ideal for power and signal applications in various industries due to its brass construction and straight mounting style.
163083-8
TE Connectivity 163083-8 is a crimp terminal with stranded construction, suitable for wire gauge 16-18 AWG. It has a rated current of 13A and can handle temperatures from -55 to 90°C. Ideal for power and signal applications requiring female contacts in regular wire types.
163088-1
TE Connectivity 163088-1 is a crimp terminal with stranded construction, suitable for wire sizes 24-20 AWG. It has UL approval, rated current of 13A, and operates b/w -55 to 90°C. Ideal for power and signal applications in various industries.
163083-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Material: BRASS; Minimum Wire Size: 18 AWG; Construction: STRANDED; MIL Conformity: NO;
163087-9
CONNECTOR ACCESSORY; Rated Current: 13 A; Finish Thickness: 80; Design: POWER AND SIGNAL; IEC Conformity: NO; Mounting Style: STRAIGHT;
163083-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Assembly Item Name: CONTACT; IEC Conformity: NO; Additional Features: TERMINATION: GOLD FLASH; Construction: STRANDED;
163081-2
CONNECTOR ACCESSORY; Rated Current: 13 A; Construction: STRANDED; Contact Style: ROUND PIN-SOCKET; Wire Gauge (AWG): 16; DIN Conformity: NO;
163081-7
CONNECTOR ACCESSORY; Rated Current: 13 A; Terminal Type: CRIMP; Material: BRASS; Maximum Wire Size: 16 AWG; MIL Conformity: NO;
163087-8
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Wire Size: 20 AWG; Maximum Cable Entry: .07 inch; Minimum Cable Entry: .045 inch; Material: BRASS;
163083-9
CONNECTOR ACCESSORY; Rated Current: 13 A; Minimum Cable Entry: .078 inch; Minimum Wire Size: 18 AWG; Material: BRASS; Maximum Cable Entry: .098 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved