Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1500 ohm; Rated Power Dissipation (P): .125 W; Tolerance: 5 %; Size Code: 805;
Median Price
$0.410
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Arrow
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.392
Verical
$0.419
Chip1Stop
$0.476
DigiKey
Farnell
$0.396
IBS Electronics
$0.425
TME
$0.434
Advanced Electronics
$0.032
$0.029
$0.026
Glotronic Ltd.
Non-linear Resistors 1624350-2 attributes and parameters. Explore more Non-linear Resistors devices from TE Connectivity
Mounting Type:
No. of Terminals:
Shape (Package):
Packing Method:
Dimensions:
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Size Code:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Tolerance:
1624350-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
250S130DR
Littelfuse
250S130DR by Littelfuse is a PTC resettable fuse with resistance of 4 ohm and rated AC voltage of 250V. It features dual-ended terminal placement in a rectangular SMT package, suitable for surface mount applications. With operating voltage of 60V and temperature range from -40 to 85 °C, it meets CUL, TUV, and UL standards.
MF-SM100/33-2-99
The Bourns MF-SM100/33-2-99 is a PTC resettable fuse with 33V URac, 1.7W power dissipation, and -40 to 85°C operating range. It's used for overload protection in surface mount applications with dual-ended terminals in a rectangular package.
RUEF400-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .05 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE;
B72207-S301-K101
TDK
The TDK B72207-S301-K101 is a VARISTOR with 300V max RMS voltage and 23J energy absorption. Suitable for applications requiring protection against voltage surges, it has a radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85°C, making it ideal for various electronic devices.
RUEF900K-2
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
MF-R400
The Bourns MF-R400 is a PTC resettable fuse with resistance of 0.01 ohm and operating voltage of 30V. It has radial terminal placement, matte tin finish, and operates b/w -40 to 85°C. Ideal for overcurrent protection in various electronic applications.
RXEF075-AP
TE Connectivity
TE Connectivity's RXEF075-AP is a PTC resettable fuse with resistance of 0.25 ohm and rated power dissipation of 0.92 W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape for through hole mounting.
B72214P2271K101
The TDK B72214P2271K101 is a varistor with 130J energy capacity, 275V RMS voltage, and 350V operating voltage. It is used for surge protection in applications requiring high reliability and durability. The varistor has dual-ended terminals, metal oxide technology, and radial package style suitable for through-hole mounting.
1206L300SLTHYR
1206L300SLTHYR by Littelfuse is a PTC resettable fuse with 0.003 ohm resistance and 6V operating voltage. It is used for overcurrent protection in various applications. Featuring dual-ended terminals, SMT package style, and TR packing method, it operates b/w -40°C to 85°C.
RXEF020S
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Terminal Placement: RADIAL; Additional Features: 1.83-2.75 OHMS AT 20 DEG CEL; No. of Terminals: 2;
RF0318-000
TE Connectivity's RF0318-000 is a PTC resettable fuse with 2 terminals, rated for 30V operating voltage and 1.7W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminal placement in a chip package style suitable for surface mounting.
RL3004-2214-122-D1
Amphenol
Amphenol's RL3004-2214-122-D1 is a NTC thermistor with 4000 ohm resistance, suitable for temperature sensing applications. It features a disk package shape, wire terminals, and operates b/w -50°C to 150°C. Ideal for through hole mounting with a high thermal sensitivity index of 4417 K.
RXEF185
TE Connectivity's RXEF185 is a PTC resettable fuse with resistance of 0.12 ohm and max operating temp of 85°C. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape. With 72V operating voltage, it is suitable for through hole mounting in various electronic circuits.
NTC0805J47K
TE Connectivity's NTC0805J47K is a 47000 ohm NTC thermistor with a thermal sensitivity index of 4100 K. It has a rated temperature range of -55 to 125 °C and is used for temperature sensing applications. This surface mount device comes in a rectangular package with dual-ended terminals, ideal for various electronic systems.
PTFL04BG471Q2N34B0
Murata Manufacturing
Murata Manufacturing's PTFL04BG471Q2N34B0 is a PTC thermistor with 470 ohm resistance, rated for 16V AC. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape. Operating b/w -10°C to 80°C, it has UL and CUL certifications.
590-32AD16-103
Honeywell Sensing And Control
590-32AD16-103 by Honeywell is a NTC thermistor with 10000 ohm resistance, 0.2% tolerance, and thermal sensitivity index of 4261 K. It is used for temperature sensing applications in a special package with connector terminals. Operating range from -60 to 125 °C.
RF2649-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .13 ohm; Rated Power Dissipation (P): 2.5 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: MATTE TIN;
MF-MSMF050/40X-2
Bourns MF-MSMF050/40X-2 is a PTC resettable fuse with 0.15 ohm resistance, 40V operating voltage, and dual-ended terminals. Ideal for overcurrent protection in various applications. SMT package style, gold over nickel terminal finish, UL and CUL reference standards.
EZJZ1V180JA
Panasonic
The Panasonic EZJZ1V180JA is a varistor resistor with 2 terminals, operating voltage of 11V, and max circuit DC voltage of 11V. It has a rectangular SMT package with dual-ended terminal placement suitable for surface mounting. With an operating temperature range from -40°C to 85°C, it is ideal for applications requiring transient voltage suppression.
B57237-S509-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 170 Cel; Thermistor Application: SOFT START; Shape (Package): DISK PACKAGE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved