Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1418884-1 is a CRIMP terminal with a min cable entry of 0.074 inch and max operating temperature of 130°C. It has a stamped contact design and can handle wire sizes ranging from 17 AWG to 15 AWG. This assembly product is commonly used in applications requiring a rated current of 13 A and a max cable entry of 0.094 inch.
Median Price
$0.243
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Boersig
1+ parts
$0.164
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.520
$0.378
$0.321
Powell Electronics
$0.910
Adafruit Industries
$5.483
$4.990
$4.496
TTI
$0.212
Mouser Electronics
$0.211
Farnell
$0.332
$0.247
Element14
$0.404
$0.303
Waytek Inc.
$0.268
TTI Europe
$0.140
Master Electronics
$0.213
$0.204
Verical
$0.240
Arrow
$0.171
Newark
$0.331
Chip1Stop
$0.205
Nova Conductors
$0.291
Electro Sonic
$0.192
NAC Semi
$0.210
TME
VNN
Lakeview Electronics
Semicontronic
$0.106
$0.103
Continental Prestige Electronics
$0.285
Argo Parts USA
$0.282
Netroflash
Advanced Electronics
Aztec Data Supply Inc.
$5.746
Perfect Parts
Eastek
$0.260
EMSNET (Excess)
GreenTree Electronics
Abacus Technologies
Futuretech Components
CRIMP. This makes the product easy to install and ensures a secure connection, making it a reliable choice.
0.074 inch. The wide range of cable entry options allows flexibility in wiring installations, making it suitable for various applications.
130 °C. With a high operating temperature range, this product can withstand extreme environments, making it suitable for demanding industrial applications.
STAMPED. The stamped contact design ensures consistent and reliable electrical connections, adding to the overall durability and performance of the product.
40 °C. The low operating temperature range allows this product to function effectively even in cold environments, making it ideal for outdoor and automotive applications.
15. This product accommodates a wide range of wire gauges, providing compatibility with various wire sizes and enhancing versatility in different wiring setups.
1.5 mm2. The ample cross-section area can handle higher levels of current, reducing the risk of overheating and ensuring proper electrical flow, making it a safe choice for circuits with higher power demands.
17 AWG. The support for smaller wire sizes adds flexibility to the product, allowing it to be used in applications where space is constrained or thinner wires are preferred.
15 AWG. The ability to accommodate larger wire sizes allows for increased current carrying capacity, making this product suitable for applications that require higher power transmission.
13 A. With a high rated current, this product can handle significant electrical loads, making it suitable for a wide range of applications, including power distribution and industrial equipment.
0.094 inch. The wide maximum cable entry ensures compatibility with various cable sizes, providing convenience during installation and making it adaptable to different wiring configurations.
FEMALE. The female contact gender ensures compatibility with male connectors, making it a suitable choice for mating with a wide range of devices and systems.
Assembly Products 1418884-1 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Cross Section Area:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
PCN Design/Specification - Mult Devs - specification chg 25/FEB/2021 Multiple Devices Document Clarification 17/Nov/2017
PCN Packaging - Change in Delivery Unit & MOQ 20/NOV/2023 Change in Delivery Unit & Minimum Order Quantity 15/MAY/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semicoa
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
International Semiconductor
Plessey Semiconductors Discrete Components Div
1N4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
Bourns
General Transistor
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
CC79L-2630-01-L
Samtec
Samtec CC79L-2630-01-L CONTACT features 10µ finish thickness, LOOSE design for 26-30 AWG wire. Made of PHOSPHOR BRONZE, ideal for Assembly Products applications.
747784-8
TE Connectivity
TE Connectivity 747784-8 is a JACK SCREW for CABLE CONNECTORS. Made of STAINLESS STEEL, it supports up to 0 AWG wire size. Mounting options include #4-40 and SCREW, ideal for various assembly applications.
114017-ZZ
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Assembly Item Name: SEALING ITEM; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; MIL Conformity: NO;
16-02-0069
Molex
CONNECTOR ACCESSORY;
16-02-0115
Molex 16-02-0115 CONTACT features CRIMP terminals, suitable for 24-22 AWG wires. With a rated current of 3A and contact resistance of 15 mohm, it is ideal for applications requiring male connectors with SQUARE PIN-SOCKET style contacts. Operating temperature ranges from -40 to 120 °C.
16-02-0077
13697408
Delphi Connection Systems
CONNECTOR ACCESSORY; Cable Types: FLRY-B; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .0748 inch; Minimum Cable Entry: .0551 inch;
WM-2S
TE Connectivity's WM-2S is an assembly product designed for the DTM SERIES. With a max operating temperature of 125°C and a min operating temperature of -55°C, it is suitable for power and signal applications. This wedge item can accommodate wire sizes up to 0 AWG and is made from polybutylene terephthalate.
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
350550-1
TE Connectivity 350550-1 is a UNIVERSAL MATE-N-LOK PLUG AND CAP HOUSING with CRIMP terminals. Rated for 600V, it supports wire gauge up to 14 AWG and rated current of 19A. Constructed with STRANDED brass material, it has approvals from CSA, UL, VDE for applications requiring POWER design at temperatures ranging from -55 to 105 °C.
FMK1G
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
HDC34-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
46999-0101
The Molex 46999-0101 is a female contact with compression style, made of brass. It is used in the 7880 Series Housing assembly products for wire sizes ranging from 30 AWG to 24 AWG. The contact design is loose, with a finish thickness of 100 and terminal length of 0.186 inch, suitable for straight mounting applications.
204-0016-000
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: ACTUATING HANDLE KIT; Material: GLASS FILLED THERMOPLASTIC;
33000-1002
The Molex 33000-1002 is a male contact assembly product for MX150 connectors. It features crimp terminals, copper alloy material, and can operate in temperatures ranging from -40 to 105°C. Suitable for wire sizes b/w 20-16 AWG, with a contact resistance of 8 mΩ and rated DC voltage of 500V.
0411-336-1605
M23053/16-003-0
Dunbar Products
ASSEMBLY ITEMS; IEC Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO;
500798020
The Molex 500798020 assembly product features UL approval, crimp terminal type, and a max operating temperature of 105°C. It is used for the 51021 HOUSING application with contact design CHAIN and rated AC voltage of 125V.
830009502
HDC36-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -55 Cel; Contact Gender: FEMALE; Maximum Wire Size: 0 AWG;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1418882-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 120 Cel;
1418884-3
TE Connectivity's 1418884-3 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 13 A. Ideal for applications requiring a female contact, with cable entry ranging from 0.074" to 0.094".
1418885-1
CONNECTOR ACCESSORY; Manufacturer Series: 1418885;
1418844-1
CONNECTOR ACCESSORY; Minimum Wire Size: 23 AWG; Cross Section Area: .35 mm2; Minimum Cable Entry: .043 inch; Contact Gender: FEMALE; Maximum Wire Size: 22 AWG;
1418844-3
TE Connectivity's 1418844-3 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 22 AWG and operates b/w -40°C to 150°C. Ideal for applications requiring female contact gender, with cable entry ranging from 0.043" to 0.069".
1418850-3
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Contact Design: STAMPED; Minimum Operating Temperature: -40 Cel; Cross Section Area: 1.5 mm2; Maximum Wire Size: 15 AWG;
1418786
Phoenix Contact
1418311
1418441
1418444
1418445
1418446
1418784
1418787
1418788
1418789
1418790
1418410-1
CONNECTOR ACCESSORY; Rated Current: 13 A; Maximum Operating Temperature: 130 Cel; Cross Section Area: 1.5 mm2; Minimum Cable Entry: .086 inch; Minimum Wire Size: 17 AWG;
1418850-1
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Maximum Wire Size: 15 AWG; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Minimum Cable Entry: .075 inch;
1418850-2
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Minimum Operating Temperature: -40 Cel; Contact Gender: FEMALE; Minimum Wire Size: 17 AWG; Wire Gauge (AWG): 15;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved