Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1123338-1 is a Combination Line Connector with dimensions of 0.827" x 1.134" x 0.906". Rated for 12V, it operates b/w -30°C to 105°C. Ideal for cable mounting applications, featuring POLYBUTYLENE TEREPHTHALATE insulator material and FEMALE contact gender.
Median Price
$2.118
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.460
100+ parts
$1.900
1k+ parts
$1.500
10k+ parts
$1.410
DigiKey
$2.510
$1.809
$1.538
$1.442
Master Electronics
-
$1.580
$1.380
$1.290
Verical
$1.776
$1.623
TE Connectivity
$2.520
$1.260
$1.010
RS (Exports)
$1.700
Nova Conductors
$1.596
Digiode
$2.337
Q Components
Vyrian
VNN
IBS Electronics
$1.739
$1.627
$1.557
Electro Sonic
$1.600
$1.400
$1.310
Cyclops Electronics Ltd
Aztec Data Supply Inc.
$1.626
Corphita
$2.214
Perfect Parts
EMSNET (Excess)
Compact size allows for easy installation and integration into various devices or systems.
Provides enough surface area for stable connections and ensures durability.
Optimal depth for secure fitting and reliability in different applications.
Suitable for low voltage applications, ensuring safe operation and compatibility.
Durable and heat-resistant material preserves the integrity of the connector under various conditions.
High temperature tolerance allows for reliable performance in demanding environments.
Can withstand low temperatures, making it versatile for use in various climates.
Option to have an empty shell allows for customization and flexibility in design.
Specifically designed for combining multiple lines, providing convenience and efficiency in connectivity.
Ensures proper alignment and connection, reducing the risk of damage or malfunction.
Optimal spacing for consistent and secure connections between mating contacts.
Easy to mount on cables, offering versatility in installation options.
Standardized pitch for compatibility with various terminals, simplifying the connection process.
Can handle a range of mains voltages, providing flexibility in power source options.
Designed to mate with male connectors, ensuring compatibility and secure connections.
Combination Line Connectors 1123338-1 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Type:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Voltage:
Terminal Pitch (mm):
1123338-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Packaging - Change in Delivery Unit & MOQ 20/NOV/2023 Packing form change 13/DEC/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Toshiba
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LM317TG
Texas Instruments
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Eic Semiconductor
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
NXP Semiconductors
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
1-1703498-1
TE Connectivity 1-1703498-1 is a Combination Line Connector with dimensions of 0.583" x 1.732" x 0.589". It has a rated voltage of 14V and can operate b/w -40°C to 130°C. With UL certification, it features male SQ PIN-SKT contacts for signal currents up to 25A in cable mounting applications.
DT06-12SA-EP06
TE Connectivity's DT06-12SA-EP06 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DTM06-3S-E004
TE Connectivity's DTM06-3S-E004 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125 °C, suitable for cable mounting applications requiring UL-certified connectors with polarized housing and crimp termination.
DT06-12SC
TE Connectivity's DT06-12SC is a 2-row combination line connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
AT06-08SA-EC01
Amphenol
The Amphenol AT06-08SA-EC01 is a 2-row combination line connector with POLYETHYLENE insulator. It has a rated current of 13A, operating temperature range from -55 to 125°C, and total of 4 contacts. Ideal for cable mounting applications requiring female contact gender and plug body style.
AT04-48P-B016
The Amphenol AT04-48P-B016 is a 48-contact combination line connector with 4 rows, rated at 13A signal current. Featuring POLYETHYLENE insulator material, it has a body size of 5.346" x 2.535" x 1.992". Ideal for cable mounting applications, this female receptacle connector uses round pin-socket contact style.
DT15-08PA
The TE Connectivity DT15-08PA is a combination line connector with 8 contacts, rated voltage of 250V, and UL flammability code of 94V-0. It has a body size of 1.545" x 2.17" x 1.185", suitable for board mounting applications in temperatures ranging from -55°C to 125°C. This male connector with solder termination is ideal for signal currents up to 13A in polarized configurations.
30700-1167
Molex
The Molex 30700-1167 is a Combination Line Connector with dimensions of 1.008" x 0.928" x 1.243". It has 16 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
33482-6201
Molex 33482-6201 is a Combination Line Connector with dimensions 1.163" x 0.875" x 2.144". It has 12 contacts, male gender, and blade pin-skt style. Ideal for cable mounting applications requiring crimp termination in industries like automotive and electronics.
15397577
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Empty Shell: NO; Mounting Type: CABLE;
DT04-12PB-B016
TE Connectivity's DT04-12PB-B016 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
DT06-08SA-CE11
TE Connectivity's DT06-08SA-CE11 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. With a body size of 1.267" x 0.872" x 1.465", it is ideal for cable mounting applications requiring a polarized, UL-certified connector.
3-1437290-8
TE Connectivity 3-1437290-8 is a Combination Line Connector with Mating Contact Pitch of 0.118", Insulation Resistance of 100MΩ, and Rated Voltage of 250V. Ideal for applications requiring a reliable connector with UL certification, operating in temperatures from -40°C to 125°C.
B02B-JWPF-SK-R(LF)(SN)
J S T Mfg
B02B-JWPF-SK-R(LF)(SN) by J S T Mfg is a Combination Line Connector with TIN contact finish and POLYBUTYLENE TEREPHTHALATE insulator. Featuring COPPER ALLOY contacts, it has 2 male contacts, UL 94V-0 flammability rating, and waterproof option. Ideal for board mounting with press fit termination, suitable for various applications requiring reliable connections.
350779-1
TE Connectivity's 350779-1 is a Combination Line Connector with dimensions of 1.051" x 0.58" x 1.079". It offers Insulation Resistance of 100MΩ, operating b/w -55°C to 105°C. This connector has UL Flammability Code of 94V-0 and is suitable for commercial applications requiring a durable, female contact plug with crimp termination.
643424-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Contact Finish: TIN; Total No. of Contacts: 6;
DT06-08SA-CE10
TE Connectivity's DT06-08SA-CE10 is a combination line connector with dimensions of 1.217" x 0.776" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a max current rating of 13A and UL flammability code of 94V-0.
12047937
Aptiv
Aptiv's 12047937 is a Combination Line Connector with POLYAMIDE66 insulator. It features 8 contacts, cable mounting, and female contact gender. Ideal for crimp termination in automotive applications.
1-967622-1
TE Connectivity 1-967622-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It features 12 contacts in 3 rows, polarized key, and female contact gender. Ideal for cable mounting applications at 115/230VAC mains connector rating.
DTM06-4S
DTM06-4S by TE Connectivity is a combination line connector with 4 contacts, rated at 250V and 7.5A. It features a glass-filled polyamide insulator material, operates b/w -55 to 125°C, and has a UL flammability code of 94V-0. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1123043-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO; Reference Standard: UL;
1123882-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Body Width: .776 inch; Body Length: 1.244 inch;
1123367-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; MIL Conformity: NO; Maximum Operating Temperature (Cel): 105;
1123371-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Body or Shell Style: PLUG; Polarization Key: POLARIZED;
1123375-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; EMI Shielded: NO; Contact Material: NOT SPECIFIED;
1123379-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 20; Termination Contact Finish: NOT APPLICABLE; Mating Info.: 1123357-1; 1123425-1;
1123387-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: .665 inch; No. of Ports: 1; IEC Conformity: NO;
1123339-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.118; MIL Conformity: NO; Body Length: .96 inch;
1123357-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POALRIZED; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
1123360-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Row Spacing (inch): 0.232; EMI Shielded: NO; Terminal Pitch (mm): 2.5;
1123391-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; EMI Shielded: NO; Minimum Operating Temperature: -40 Cel;
1123419-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; No. of Ports: 1; Reference Standard: UL;
1123337-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Row Spacing (inch): 0.232; MIL Conformity: NO; UL Flammability Code: 94-HB;
1123339-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Body Depth: .906 inch; Contact Material: NOT SPECIFIED;
1123340-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Body Length: .827 inch; Contact Material: NOT SPECIFIED;
1123341-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; EMI Shielded: NO; Terminal Pitch (mm): 2.2;
1123341-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Terminal Pitch (mm): 2.2; Empty Shell: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved