Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 100G0111-2.00-0 is a 14 AWG wire with TIN finish, rated for 1300V and temperatures from -55 to 125°C. Ideal for electrical applications requiring flexibility, it features copper alloy conductors in a 37X30 stranding configuration.
Median Price
$6.431
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Master Electronics
1+ parts
-
100+ parts
$5.820
1k+ parts
$5.780
10k+ parts
$2.060
Verical
$8.148
DigiKey
$6.176
$5.932
Nova Conductors
$3.206
VNN
Rapid Electronics
Vyrian
Continental Prestige Electronics
$3.142
Netroflash
$3.046
$2.982
Argo Parts USA
Aztec Data Supply Inc.
$6.779
Higher rated voltage allows for safe use in higher voltage applications, ensuring reliable performance.
TIN finish provides corrosion resistance and improves conductivity, making the wire durable and efficient.
With a high maximum operating temperature, this wire can withstand heat without compromising its performance.
The low minimum operating temperature allows for use in cold environments without risk of damage or failure.
A thicker wire gauge (lower number) like 14 AWG provides lower resistance and allows for higher current carrying capacity.
The diameter of 2.36 mm indicates the wire is sturdy and capable of handling a variety of applications.
With a high stranding count, this wire is flexible and can withstand bending and twisting without breaking.
Copper alloy conductors offer high conductivity and strength, ensuring efficient transmission of electricity.
The wire's maximum size of 14 AWG ensures compatibility with various connectors and terminals.
This specific cable type indicates it meets certain specifications for quality and performance standards.
Being a flexible cord and fixture wire, this product is versatile and can be used in different applications that require flexibility.
Electrical Wires & Cables 100G0111-2.00-0 attributes and parameters. Explore more Electrical Wires & Cables devices from TE Connectivity
Cable Types:
Conductor Finish:
Conductor Material:
Connector Accessory Type:
Diameter:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Stranding:
Wire Gauge (AWG):
Maximum Wire Size:
Wire & Cable Name:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
STM32F405RGT6TR
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
SS14
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
Unitrode
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
3080GY001
Alpha Wire
Alpha Wire 3080GY001 is a flexible cord with 600V rating, suitable for various applications. Constructed with stranded copper alloy conductor and PVC insulator, it has approvals from CE, CSA, and UL. With a temperature range of -40 to 105°C, this wire is ideal for electrical installations requiring durability and flexibility.
22690
Helukabel
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: YES; No. of Conductors: 4; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 16;
35669
Cables To Go
CABLE ASSEMBLY; Connector Side-1: USB 2.0 A MALE; Connector Side-2: USB 2.0 B MALE; Shielding: YES; MIL Conformity: NO; Conductor Material: COPPER ALLOY;
318090-002
TE Connectivity
TE Connectivity's 318090-002 is a 16 AWG electrical wire with TIN finish, rated for 600V and -65 to 150°C operating temperatures. Ideal for FLEXIBLE CORD AND FIXTURE WIRE applications like SPEC 55 cables.
55A0111-20-0
TE Connectivity 55A0111-20-0 is a CSA, CAA, MIL, UL approved stranded wire with 600V rating. Featuring copper alloy conductor with tin finish and 19X32 stranding, it operates b/w -65 to 150 °C. Ideal for applications requiring flexible cord and fixture wire such as SPEC 55 cables.
C3365/20
3m Electronic Products Division
C3365/20 by 3M Electronic Products Division is a flat flexible cable with 20 conductors, rated at 300V. Featuring tinned copper conductor material and PVC insulation, it operates b/w -20°C to 105°C. Approved by CUL and UL, it is ideal for electrical wiring applications requiring flexibility and durability.
23323
Helukabel 23323 is a stranded wire with PVC insulator, polyurethane jacket, and bare copper conductor. It has CE and EAC approvals, rated for 300V with -40 to 80°C operating temperature range. Ideal for machine, tool making, plant, and steel industries.
2451320210
Molex
Molex 2451320210 wire is UL approved with a rated voltage of 300V, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications, it features MICRO-FIT 3.0 connectors on both sides for reliable electrical connections.
E50824
Pic Wire & Cable
E50824 by Pic Wire & Cable is a stranded communication cable with fluoropolymer jacket and shielding. It features 8 silver-coated copper conductors suitable for airborne gigabit Ethernet LAN applications. With a temperature range of -55 to 200°C, this cable has a diameter of 6.73mm and length of 82mm.
MXT10050CMBK
Startech.com
MXT10050CMBK by Startech.com is a 0.5mm PVC jacketed communication cable with shielding. Featuring 28 AWG wire gauge, it has DB9 FEMALE and DB9 MALE connectors for data transmission. Ideal for connecting devices in electrical and communication applications.
1174CSL005
1174CSL005 by Alpha Wire is a stranded electrical wire with a PVC jacket and tin finish. It has a rated voltage of 300V and is suitable for audio systems and communication circuits. With a wire gauge of 22 AWG, it has a diameter of 4.98mm and length of 30.48mm.
55PC1121-22-8/98-9
TE Connectivity's 55PC1121-22-8/98-9 is a 600V rated wire with TIN finish, suitable for -65 to 150°C. Featuring copper alloy conductor and 22 AWG gauge, it is ideal for FLEXIBLE CORD AND FIXTURE WIRE applications under SPEC 55 category.
12509
WIRE AND CABLE; Rated Voltage: 600 V; Shielding: NO; Maximum Operating Temperature: 80 Cel; Application: MACHINE TOOLS, CONTROL SYSTEMS, CONNECTION BETWEEN CONTROL; Cross Section Area: 2.5 mm2;
U3A00010-05M
L-com
Wires and Cables;
31897
Wentronic
CABLE ASSEMBLY; Connector Side-1: HDMI A PLUG; Connector Side-2: HDMI A PLUG; Shielding: YES; Cross Section Area: .051 mm2; Length: 15 mm;
2273112-4
TE Connectivity's 2273112-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, suitable for various electrical applications requiring straight mounting style. With a diameter of 4.3mm and length of 1.5mm, it offers reliable connectivity in diverse environments.
982661034
Molex 982661034 flat cable with UL approval, rated for 60V, features tin finish copper alloy conductor and polyester insulator. Suitable for applications requiring a temperature range of -40 to 105°C, it has 33 conductors with AWG 32 gauge and 0.03 mm2 cross section area, ideal for low current (0.5A) electrical connections.
2451320410
Molex 2451320410 wire is UL approved for 300V, AWG 20 gauge, and 5.5mm diameter. Ideal for POWER applications with MICRO-FIT 3.0 connectors on both sides, ensuring reliable electrical connections in various setups.
55A0111-20-9
TE Connectivity's 55A0111-20-9 wire is a CSA, CAA, MIL, UL approved stranded cable with a rated voltage of 600V. Constructed with tin finish copper alloy conductor, it operates b/w -65 to 150°C. Ideal for flexible cord and fixture wire applications due to its 19X32 stranding and resistance of 0.032 ohm.
P568-016
Tripp Lite
CABLE ASSEMBLY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
100G0111-1.50-9
TE Connectivity's 100G0111-1.50-9 is a stranded electrical wire with TIN finish, rated for 1300V and operating temperatures from -55 to 125°C. With a cross-section area of 1.5mm², it is ideal for flexible cord and fixture wire applications requiring a max wire size of 15 AWG.
100G0111-0.50-1
TE Connectivity's 100G0111-0.50-1 is a flexible cord and fixture wire with a rated voltage of 1300V, TIN conductor finish, and operating temperatures from -55°C to 125°C. It features a copper alloy conductor material, 21 AWG wire gauge, and is suitable for electrical applications requiring high flexibility and durability.
100G0111-0.25-0
WIRE AND CABLE; Rated Voltage: 1300 V; Shielding: NO; Insulator Material: POLYMER; MIL Conformity: NO; Construction: STRANDED;
100G0111-0.60-0
WIRE AND CABLE; Rated Voltage: 1300 V; Shielding: NO; Conductor Finish: TIN; Wire Gauge (AWG): 20; Construction: STRANDED;
100G0111-1.50-0
TE Connectivity's 100G0111-1.50-0 is a stranded copper alloy wire with tin finish, rated for 1300V and operating temperatures from -55 to 125°C. With a cross-section area of 1.5mm² and diameter of 2.1mm, it is ideal for flexible cord and fixture wire applications in electrical systems.
100G1121-1.50-6/9-0
WIRE AND CABLE; Rated Voltage: 750 V; Conductor Finish: TIN; Conductor Material: COPPER ALLOY; Maximum Operating Temperature: 105 Cel; Cable Types: SPEC 100G;
100G0111-1.00-0
TE Connectivity 100G0111-1.00-0 is a stranded electrical wire with 18 AWG, rated for 1300V and -55 to 125°C operating temperature range. Ideal for flexible cord and fixture wire applications due to its copper alloy conductor and tin finish.
100G0111-2.50-9
WIRE AND CABLE; Rated Voltage: 1300 V; Cable Types: SPEC 100G; Conductor Finish: TIN; No. of Conductors: 1; Diameter: 2.55 mm;
100G0111-0.25-6
TE Connectivity's 100G0111-0.25-6 is a flexible cord and fixture wire with a rated voltage of 1300V. It features a conductor finish of TIN and can operate in temperatures ranging from -55°C to 125°C. This wire, with a diameter of 1.16mm and cross-sectional area of 0.25mm2, is commonly used in electrical applications requiring high voltage capabilities.
100G0111-0.25-9
WIRE AND CABLE; Rated Voltage: 1300 V; Shielding: NO; Stranding: 19X36; Diameter: 1.14 mm; Maximum Wire Size: 24 AWG;
100G0111-0.50-0
TE Connectivity's 100G0111-0.50-0 is a stranded electrical wire with 21 AWG, TIN finish, and 0.5 mm2 cross-section area. It operates b/w -55 to 125 °C and is ideal for flexible cord and fixture wire applications.
100G0111-0.50-2
TE Connectivity's 100G0111-0.50-2 is a STRANDED wire with TIN finish, rated for 1300V and operating b/w -55 to 125°C. Featuring 21 AWG, it has a diameter of 1.42mm and cross section area of 0.5 mm². Ideal for FLEXIBLE CORD AND FIXTURE WIRE applications due to its copper alloy conductor material and max wire size compatibility.
100G1121-1.20-0/9-0
WIRE AND CABLE; Rated Voltage: 750 V; Shielding: YES; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
100G0121-3.00-0/9
WIRE AND CABLE; Rated Voltage: 750 V; Shielding: NO; Cable Types: SPEC 100G; Conductor Finish: TIN; Conductor Material: COPPER ALLOY;
100G1121-3.00-0/9-0
WIRE AND CABLE; Rated Voltage: 750 V; Shielding: YES; Maximum Operating Temperature: 105 Cel; Cross Section Area: 3 mm2; Wire Gauge (AWG): 0;
100G1131-0.40-0/2/9-0
WIRE AND CABLE; Rated Voltage: 750 V; Shielding: YES; Maximum Wire Size: 0 AWG; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Diameter: 4.2 mm;
100G0111-2.50-0
WIRE AND CABLE; Rated Voltage: 1300 V; Shielding: NO; Minimum Operating Temperature: -55 Cel; Diameter: 2.59 mm; Stranding: 37X29;
100G0111-2.50-2
WIRE AND CABLE; Rated Voltage: 1300 V; Shielding: NO; Minimum Operating Temperature: -55 Cel; Wire & Cable Name: FLEXIBLE CORD AND FIXTURE WIRE; Cable Types: SPEC 100G;
100G0111-2.00-6
WIRE AND CABLE; Rated Voltage: 1300 V; Shielding: NO; Minimum Operating Temperature: -55 Cel; No. of Conductors: 1; Cross Section Area: 2 mm2;
100G0111-2.50-6
WIRE AND CABLE; Rated Voltage: 1300 V; Stranding: 37X37; No. of Conductors: 1; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 13;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved