Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's 1-971111-4 is a UL-approved stranded electrical wire with a rated voltage of 300V. Its PVC insulator material and operating temperature range of -20 to 105°C make it suitable for various applications. With 14 conductors, this flat ribbon cable has a diameter of 0.89mm and length of 152mm.
Median Price
$143.506
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
VNN
Vyrian
R&J Components
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Advanced Electronics
$5.655
$5.146
$4.637
Aranea Global
$140.636
$135.010
Continental Prestige Electronics
Perfect Parts
Glotronic Ltd.
Argo Parts USA
Authorized Procurement Solutions
EMSNET (Excess)
Cyclops Electronics Ltd (Excess)
Having UL approval ensures that this product meets the industry standards for safety and quality.
Using stranded construction makes the cable more flexible and resistant to breakage, which is beneficial for installations requiring movement.
With a high rated voltage, this cable can safely handle a variety of applications without risk of electrical failure.
The PVC insulator material provides good insulation properties and protection against environmental factors, enhancing the cable's durability.
The high maximum operating temperature allows this cable to be used in environments with elevated heat levels without performance degradation.
The low minimum operating temperature ensures that this cable remains flexible and functional even in cold conditions.
The 28 AWG wire gauge makes this cable suitable for applications where a thinner and more lightweight wire is required.
The small diameter of this cable makes it easier to route and install in tight spaces, increasing its versatility.
At 152 mm long, this cable provides ample length for various connection needs while also allowing for some flexibility in routing.
The 7X36 stranding configuration offers a good balance between flexibility and strength, making the cable suitable for a range of applications.
With 14 conductors, this cable can accommodate multiple signal or power lines in a single, compact design, reducing the need for multiple cables.
The flat ribbon cable design allows for easy mass termination and routing, making it ideal for applications where space and organization are important.
Electrical Wires & Cables 1-971111-4 attributes and parameters. Explore more Electrical Wires & Cables devices from TE Connectivity
Approvals (V):
Connector Accessory Type:
Construction:
Diameter:
Insulator Material:
Length:
No. of Conductors:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Voltage:
Shielding:
Stranding:
Wire Gauge (AWG):
Wire & Cable Name:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
Good-ark Electronics
282784-000
TE Connectivity
TE Connectivity's 282784-000 wire is a flexible cord with 24 AWG copper alloy conductor, rated for 600V and -65 to 150°C. Ideal for electrical applications requiring durable cables with TIN finish, such as fixtures and power cords.
M81044/12-22-91
WIRE AND CABLE;
2205306-1
TE Connectivity 2205306-1 wire is designed for power and signal applications with 7 conductors. It has a rated voltage of 200V, insulator material POLYESTER, and can operate b/w -40 to 105°C. Ideal for use in electrical systems requiring a max current of 1.6A with wire gauge up to 28 AWG.
083096000000
Franz Binder &
M27500-22ML1T08
TE Connectivity's M27500-22ML1T08 is a MIL-DTL-27500 cable with 600V rating, TIN finish, and copper alloy conductor. It operates b/w -65°C to 150°C, suitable for flexible cord and fixture wire applications.
6823WH001
Alpha Wire
Alpha Wire's 6823WH001 is a CE-approved stranded wire with a rated voltage of 300V. Featuring polyphenylene ether insulation, it operates b/w -40 to 110°C. Ideal for flexible cord and fixture wiring applications due to its bare copper conductor and 22 AWG size.
09454521504
Harting Electronics & Kg
09454521504 by Harting Electronics & Kg is a shielded communication cable with 8 conductors, AWG 8 wire gauge, and stranded construction (7X27). It has RJ45 jack and plug connectors for applications requiring reliable data transmission in temperatures ranging from -25 to 70°C.
7012-0802
Sv Microwave
CABLE ASSEMBLY;
2273107-4
TE Connectivity's 2273107-4 is a communication cable with 22 AWG wire gauge, rated for 250V DC and 4A current. It operates b/w -40°C to 80°C, suitable for straight mounting with M12 screw option. Ideal for electrical wiring applications requiring reliable performance in various environments.
115101-30-18.00
Amphenol
M22759/16-22-9
Carlisle Interconnect Technologies
M22759/16-22-9 by Carlisle IT is a MIL-approved stranded wire with 600V rating, featuring tin finish and ETFE insulation. Ideal for aerospace applications, it operates b/w -55°C to 150°C, with 22 AWG copper conductor and resistance of 0.053 ohm.
4160500
Lapp Group Pvt
4160500 by Lapp Group Pvt is a 600V stranded wire with PVC insulation. It has CE, CSA, HAR, UL approvals and operates b/w -40 to 105°C. With tinned copper conductor and 2.5mm² cross-section area, it's ideal for cabling applications requiring flexibility and durability.
1301190001
Molex
NF24Q100-01
NF24Q100-01 by Carlisle Interconnect Technologies is a 4-conductor stranded fiber optic cable with PTFE insulator and FEP jacket. Shielded for Ethernet backbone, high-definition video, and ground vehicle bus applications. Features 24 AWG wire gauge, 4.14mm diameter, and 73mm length.
688011983
FFSD-05-D-04.00-01-N
Samtec
Samtec's FFSD-05-D-04.00-01-N is a UL-approved stranded cable with tin finish, PVC insulation, and 30 AWG wire gauge. Ideal for high reliability applications, it has a temperature range of -40 to 105°C, 7X38 stranding, and rated current of 2.3A.
374009-01
Qualtek Electronics
Qualtek Electronics' 374009-01 power cable has a rated voltage of 125V and max operating temperature of 70°C. With approvals from SAA, it features connectors AS3112 and IEC60320 C13, suitable for various electrical applications requiring a current rating of 10A.
VW3M8201R15
Schneider Electric Sa
P568-016
Tripp Lite
80893
Helukabel
Helukabel 80893 is a communication cable with 48 conductors, suitable for indoor cabling. It has approvals from DIN and VDE, operating b/w -20°C to 60°C. With a diameter of 13.5mm, it's ideal for patching and crossing applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-971111-3
TE Connectivity's 1-971111-3 is a flat ribbon cable with 10 conductors, rated at 300V. Featuring tinned copper conductor material and PVC insulation, it operates b/w -20°C to 105°C. Ideal for electrical wiring applications requiring flexibility and durability.
1-971111-7
WIRE AND CABLE; Rated Voltage: 30 V; Rated Current: 2 A; Shielding: NO; Construction: STRANDED; No. of Conductors: 24;
1-971111-6
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Wire Gauge (AWG): 28; Approvals (V): UL; Insulator Material: POLYVINYL CHLORIDE;
1-971111-2
WIRE AND CABLE; Rated Voltage: 300 V; Shielding: NO; Conductor Material: TINNED COPPER; Stranding: 7X36; No. of Conductors: 9;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved