Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-2319848-2 is a Slide DIP Switch with SPST function. It features GOLD OVER NICKEL plating, NYLON housing, and COPPER ALLOY contacts. Ideal for applications requiring PANEL MOUNT installation in electronics with operating temperatures from -20 to 85°C.
Median Price
$0.878
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Netroflash
$0.834
$0.816
Authorized Procurement Solutions
The white color of the actuator provides high visibility and easy identification of the switch position, making it user-friendly.
Nylon housing material ensures durability and resistance to various environmental factors, increasing the longevity of the switch.
Having 2 switch sections allows for more flexibility in the switching options, offering versatility in usage.
The SPST switch function provides a simple ON/OFF operation, making it easy to use for basic applications.
Gold over nickel plating on the end contacts ensures reliable electrical conductivity and corrosion resistance, enhancing the switch's performance.
The low body height of 3.45 mm allows for compact design and space-saving installation, ideal for applications with limited space.
With a maximum operating temperature of 85°C, this switch can withstand high-temperature environments, ensuring consistent performance.
The maximum AC contact current of 0.025 A allows for safe operation in AC circuit applications, preventing overload and damage.
The minimum operating temperature of -20°C ensures reliable operation even in low-temperature conditions, making it suitable for diverse environments.
The end contacts made of copper alloy offer excellent conductivity and durability, ensuring long-term reliability in electrical connections.
Having 2 positions provides a simple choice between two settings, suitable for applications where only two options are needed.
The slide actuator type offers easy and quick switching action, allowing for efficient operation and user-friendly experience.
With a maximum DC contact voltage of 24 V, this switch can handle typical DC circuit voltages, ensuring compatibility with various electronic systems.
The slide DIP switch type combines the convenience of a slide switch with the versatility of a DIP switch, offering a reliable and flexible solution for circuit customization.
Gold over nickel plating on the center contacts ensures consistent electrical performance and signal integrity, enhancing the overall reliability of the switch.
The tube packing method provides protection and easy storage for the switches, facilitating handling and transportation in bulk quantities.
The compact body length/diameter of 4.98 mm allows for easy integration into various electronic devices and PCBs, contributing to a streamlined design.
The maximum DC contact current of 0.025 A ensures safe and reliable operation in DC circuits, preventing overheating and electrical issues.
The wire termination type allows for easy connection to wire harnesses or PCBs, offering flexibility in installation and compatibility with different wiring configurations.
The panel mount feature enables secure installation on panels or enclosures, ensuring stability and ease of access for switch operation in various applications.
DIP & SIP Switches 1-2319848-2 attributes and parameters. Explore more DIP & SIP Switches devices from TE Connectivity
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum AC Current:
Mounting Type:
Length/Diameter:
Height:
Packing Method:
Termination Type:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
1-2319848-2 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.70.00
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
LM358D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ECA2DHG4R7
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
1-1825057-0
TE Connectivity
TE Connectivity 1-1825057-0 is a SPST slide DIP switch with 12 positions. Featuring gold over nickel end contact plating, it has an electrical life of 1000 cycles and can handle up to 1A AC/DC current. Ideal for applications requiring reliable switching in temperatures ranging from -30°C to 85°C.
418117270908
Wuerth Elektronik & Kg
Wurth Elektronik 418117270908 is a slide DIP switch with SPST function, 8 positions, and 2000 cycles electrical life. It features polybutylene terephthalate housing, copper alloy terminals, and gold plating for end contacts. Ideal for applications requiring ON-OFF contact functions in electronic circuits.
A6FR-3104
Omron
DIP Switches; null: PIANO DIP SWITCH;
219-8MSTRF
Cts
219-8MSTRF by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 8 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for OFF-ON applications with 2000 cycles durability and 1000000000 ohm insulation resistance.
1-1571983-3
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Minimum Operating Temperature: -30 Cel; null: LATCHED; Maximum DC Contact Current: .025 A; Electrical Life: 1000 Cycle(s);
A6S-4102
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: FLAT TYPE; null: YELLOW; null: LATCHED; Body Length/Diameter: 11.1 mm;
418217270906A
418217270906A by Wurth Elektronik is a slide DIP switch with SPST function and 6 sections. It has a max DC contact voltage of 24V, electrical life of 2000 cycles, and insulation resistance of 100M ohm. Ideal for applications requiring through-hole mounting in electronic circuits.
1-1825190-0
TE Connectivity 1-1825190-0 is a PIANO DIP SWITCH with 12 switch sections, SPST function, and TIN plating. Made of NYLON housing material, it has a body height of 2mm and can handle up to 2A AC/DC current. Ideal for applications requiring precise switching in electronics due to its THROUGH HOLE-RIGHT ANGLE mounting feature.
SDA02H1SBD
C & K Components
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Additional Features: LOW PROFIE, UL; Body Height: 3.5 mm; Termination Type: SOLDER; Body Width: 7.06 inch;
CHS-04B
Nidec Copal Electronics
CHS-04B by Nidec Copal Electronics is a waterproof slide DIP switch with 4 sections, SPST function, and gold-plated contacts. It features POLYPHENYLENE SULPHIDE housing, COPPER ALLOY terminals, and operates b/w -40 to 85 °C. Ideal for applications requiring reliable reflow solderability and high insulation resistance up to 1G ohm.
A6S-1102-PH
Omron A6S-1102-PH DIP & SIP Switch features SPST switch function, gold plating, and IP40 sealing. With 1000 cycles electrical life and 100M ohm insulation resistance, it's ideal for applications requiring waterproofing and a flat actuator type in a compact 3.48" x 3mm body.
A6HF-2102-PM
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: LATCHED; Maximum DC Contact Voltage: 24 V; Electrical Life: 1000 Cycle(s); null: SLIDE DIP SWITCH;
KHS82E
Otax
KHS82E by Otax is a DIP & SIP switch with 8 sections, SPST function, and gold plating. It features slide actuator type and latched switch action. Ideal for surface mount applications, sealed with tape, and suitable for reflow soldering.
76SB04T
Grayhill
Grayhill's 76SB04T is a SLIDE DIP SWITCH with 4 sections, SPST function, and 2000 cycles electrical life. Ideal for applications requiring a max DC contact voltage of 30V, such as through-hole mounting in electronic devices. Operating temperatures range from -40°C to 85°C for reliable performance.
1825059-1
TE Connectivity 1825059-1 is a SPST slide DIP switch with 2 sections, white actuator, and polyphenylene sulphide housing. It has copper alloy terminals, gold center contacts, and nickel plating. With 1000 cycles electrical life and -30 to 85°C operating temperature range, it's ideal for panel mounting applications requiring OFF-ON contact function at 24VDC/1A.
A6E-6104-N
Omron A6E-6104-N is a SPST slide DIP switch with 6 positions, gold-plated contacts, and 1000 cycles electrical life. It has a max DC contact voltage of 24V and insulation resistance of 100M ohm. Ideal for applications requiring reliable switching in temperatures ranging from -20 to 70°C.
SDA02H0SBR
Itt Cannon
SDA02H0SBR by ITT Cannon is a slide DIP switch with SPST function. It features gold-plated brass terminals, Beryllium Copper end contacts, and Polyphenylene Sulphide housing. With 1000 cycles electrical life and -40 to 85°C operating temperature range, it's ideal for ON-OFF applications in electronics requiring a compact surface-mount solution.
1825057-5
TE Connectivity 1825057-5 is a SPST slide DIP switch with 6 positions, gold over nickel plating, and polyphenylene sulphide housing. It has a max DC contact current of 1A and is ideal for applications requiring OFF-ON contact function in electronic devices.
3-1825059-7
TE Connectivity's 3-1825059-7 DIP & SIP Switch features SPST switch function, 1000 cycles electrical life, and 100M ohm insulation resistance. With a max operating temperature of 85°C, it is ideal for panel mounting applications requiring a latched switch action in electronic devices.
MCDM(R)-02-T
Multicomp Pro
MCDM(R)-02-T by Multicomp Pro is a SPST slide DIP switch with 2 sections, gold over nickel plating, and polyphenylene sulphide housing. It has an electrical life of 2000 cycles, insulation resistance of 100MΩ, and operates b/w -20°C to 70°C. Ideal for applications requiring a latched switch action in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-2319847-8
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 85 Cel; Maximum AC Contact Current: .025 A; null: SLIDE; Maximum DC Contact Voltage: 24 V;
1-2319747-6
DIP Switches; Mounting Feature: PANEL MOUNT; Body Height: 3.7 mm; Body Length/Diameter: 11.32 mm; null: 4; Packing Method: TR;
1-2319764-4
DIP Switches; Mounting Feature: PANEL MOUNT; Minimum Operating Temperature: -20 Cel; null: 8; null: PIANO; Maximum DC Contact Current: .025 A;
1-2319847-6
DIP Switches; Mounting Feature: PANEL MOUNT; null: GOLD OVER NICKEL; End Contact Material: COPPER ALLOY; Body Length/Diameter: 15.14 mm; Maximum DC Contact Voltage: 24 V;
1-2319847-4
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 85 Cel; null: SPST; Body Height: 3.85 mm; Minimum Operating Temperature: -20 Cel;
1-2319847-0
DIP Switches; Mounting Feature: PANEL MOUNT; Termination Type: WIRE; End Contact Plating: GOLD OVER NICKEL; Minimum Operating Temperature: -20 Cel; Maximum DC Contact Voltage: 24 V;
1-2319847-1
DIP Switches; Mounting Feature: PANEL MOUNT; End Contact Material: COPPER ALLOY; null: SLIDE; null: SPST; Maximum DC Contact Voltage: 24 V;
1-2319848-0
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum DC Contact Voltage: 24 V; null: GOLD OVER NICKEL; Body Length/Diameter: 25.3 mm; Maximum AC Contact Current: .025 A;
1-2319848-1
DIP Switches; Mounting Feature: PANEL MOUNT; null: 12; Minimum Operating Temperature: -20 Cel; null: GOLD OVER NICKEL; Termination Type: WIRE;
1-2319848-3
DIP Switches; Mounting Feature: PANEL MOUNT; Body Height: 3.45 mm; Maximum Operating Temperature: 85 Cel; Termination Type: WIRE; Maximum AC Contact Current: .025 A;
1-2319848-4
DIP Switches; Mounting Feature: PANEL MOUNT; Minimum Operating Temperature: -20 Cel; null: NYLON; Maximum AC Contact Current: .025 A; Maximum DC Contact Current: .025 A;
1-2319848-6
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum DC Contact Current: .025 A; null: NYLON; null: 6; Termination Type: WIRE;
1-2319848-7
DIP Switches; Mounting Feature: PANEL MOUNT; null: SLIDE DIP SWITCH; null: 7; Body Height: 3.45 mm; Packing Method: TUBE;
1-2319848-8
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum DC Contact Current: .025 A; Maximum DC Contact Voltage: 24 V; Minimum Operating Temperature: -20 Cel; null: SLIDE DIP SWITCH;
1-2319848-9
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 85 Cel; Termination Type: WIRE; Maximum AC Contact Current: .025 A; End Contact Plating: GOLD OVER NICKEL;
1-2319847-3
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum DC Contact Current: .025 A; null: NYLON; null: SLIDE; End Contact Material: COPPER ALLOY;
1-2319847-5
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum Operating Temperature: 85 Cel; null: GOLD OVER NICKEL; null: 5; Termination Type: WIRE;
1-2319847-7
DIP Switches; Mounting Feature: PANEL MOUNT; null: 7; Minimum Operating Temperature: -20 Cel; Body Length/Diameter: 17.68 mm; Termination Type: WIRE;
1-2319847-9
DIP Switches; Mounting Feature: PANEL MOUNT; null: 9; null: WHITE; End Contact Plating: GOLD OVER NICKEL; Maximum DC Contact Current: .025 A;
1-2319847-2
DIP Switches; Mounting Feature: PANEL MOUNT; Maximum DC Contact Current: .025 A; null: 2; End Contact Material: COPPER ALLOY; Body Height: 3.85 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved