Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-1825002-8 is a DIP switch with white actuator and polyphenylene sulphide housing. It offers SPST switch function, 10 positions, and gold over nickel plating. Ideal for applications requiring latched switch action in temperatures ranging from -30 to 85°C.
Median Price
$1.820
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Newark
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$1.880
$1.480
Master Electronics
$3.390
$3.240
$1.180
DigiKey
$1.440
$1.410
Verical
$1.460
$1.390
Farnell
$2.820
$2.650
Powell Electronics
$1.470
$1.400
Nova Conductors
$2.631
VNN
Rapid Electronics
IBS Electronics
$1.350
$1.325
Vyrian
Semicontronic
$2.500
$2.438
$2.425
Continental Prestige Electronics
$2.531
$2.480
Argo Parts USA
Aztec Data Supply Inc.
$2.657
Component Stockers USA
$1.660
$1.300
Assy Fe
The white color of the actuator provides a visually appealing design.
Polyphenylene sulphide is known for its high heat resistance and chemical resistance, making the switch durable in various environments.
With a high electrical life of 1000 cycles, this switch offers reliability and longevity in electrical operations.
The wide body width provides ease of use and visibility when operating the switch.
The tape sealing ensures protection against dust and contaminants, increasing the switch's lifespan.
Having 10 switch sections allows for versatile configurations and applications.
Single Pole, Single Throw (SPST) switch function simplifies the circuit design and ensures efficient operation.
Gold over nickel plating on the end contacts offers enhanced conductivity and corrosion resistance.
The low body height allows for a compact design, saving space in the application.
The high maximum operating temperature of 85°C enables reliable performance even in harsh conditions.
The switch can handle a maximum AC contact current of 1A, suitable for various electrical applications.
With a minimum operating temperature of -30°C, the switch can function effectively in cold environments.
Copper alloy end contacts provide excellent conductivity and reliability in electrical connections.
Having 10 positions allows for multiple switch settings, offering flexibility in operation.
The flush side type actuator design ensures smooth operation and a sleek appearance.
The switch can handle a maximum DC contact voltage of 5V, suitable for low voltage applications.
The slide DIP switch design offers easy manual operation and selection of settings.
Gold over nickel plating on the center contacts provides improved conductivity and durability.
The tube packaging method ensures convenient storage and transportation of the switches.
The compact body length/diameter size allows for space-efficient integration in various applications.
The switch has a maximum DC rating of 0.1A at 24VDC, suitable for low-power applications.
With a maximum DC contact current of 1A, the switch can handle moderate electrical loads.
The latched switch action ensures that the selected setting remains in place until manually changed, offering stability in operation.
The wire termination type allows for easy installation and connection of the switch in a circuit.
The through hole-right angle mounting feature offers secure and stable installation of the switch on a PCB.
The terminal length of 0.157 inches provides a secure connection point for wires or PCB mounting.
DIP & SIP Switches 1-1825002-8 attributes and parameters. Explore more DIP & SIP Switches devices from TE Connectivity
Contact Maximum DC Rating (R Load):
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum AC Current:
Mounting Type:
Length/Diameter:
Height:
Width:
Packing Method:
Terminal Length:
Termination Type:
Contact End Plating:
Contact End Material:
Minimum Operating Temperature:
Maximum Operating Temperature:
Sealing Type:
Lifespan:
1-1825002-8 Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.65
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
1N4148W-7-F
Diodes Incorporated
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
Continental Device India
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
Gec Plessey Semiconductors
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
A6H-8102-PM
Omron
Omron A6H-8102-PM is a DIP switch with 8 sections, SPST function, and 1000 cycles electrical life. It has a max DC contact voltage of 24V and operates b/w -20°C to 70°C. Ideal for surface mount applications requiring latched switch action in compact spaces.
A6HF-2102-P
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Maximum DC Contact Current: .025 A; null: 2; Body Width: 3.67 inch; JESD-609 Code: e4;
A6S-3101-PH
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Contact Resistance: 200 mohm; null: SLIDE DIP SWITCH; null: 3; Packing Method: TR, EMBOSSED;
1-1825006-1
TE Connectivity
TE Connectivity 1-1825006-1 is a SPST slide DIP switch with 6 positions. It features gold over nickel plating, copper alloy terminals, and polyphenylene sulphide housing. Ideal for applications requiring ON-OFF contact function in electronics, it has an electrical life of 1000 cycles and operates b/w -30 to 85°C.
435640-2
Tyco Electronics Alcoswitch
DIP Switches; Mounting Feature: THROUGH HOLE-STRAIGHT; Manufacturer Series: 435640; null: LATCHED; JESD-609 Code: e0; Body Width: 9.65 inch;
CHS-01TA
Nidec Copal Electronics
The Nidec Copal Electronics CHS-01TA is a waterproof slide DIP switch with SPST function. It has a max DC contact voltage of 6V and electrical life of 2000 cycles. Ideal for applications requiring reflow solderability, such as consumer electronics and industrial control systems.
219-6MSTR
Cts
219-6MSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 6 sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics requiring a reliable slide dip switch with 2000 cycles lifespan.
219-2LPST
219-2LPST by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 2000 cycles electrical life and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics due to its SPST function and FLUSH TYPE actuator.
MGDH0404
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; JESD-609 Code: e4; Manufacturer Series: MGDH04; Terminal Finish: GOLD; Electrical Life: 1000 Cycle(s);
SD04H0SB1
C & K Components
SD04H0SB1 by C & K Components is a DIP & SIP switch with 4 sections, SPST function, and gold-plated contacts. Made of polyphthalamide housing and brass terminals, it has an electrical life of 2000 cycles. Ideal for applications requiring a latched switch action in temperatures ranging from -40 to 85°C.
1571983-5
Tyco Electronics Amp
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: 4; Minimum Operating Temperature: -30 Cel; Sealing: TAPE SEALED; Maximum DC Contact Current: .025 A;
BD02
Itt Cannon
ITT Cannon's BD02 is a SPST slide DIP switch with 2 positions, 10000 cycles electrical life, and 1000000000 ohm insulation resistance. Ideal for applications requiring ON-OFF contact function at temperatures ranging from -40 to 85 °C. Features include EPOXY terminal sealing, PHOSPHOR BRONZE end contacts, and POLYBUTYLENE TEREPHTHALATE housing material.
1825059-5
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3.5 mm; null: FLUSH TYPE; null: 2; Additional Features: APPROVAL: UL;
1825059-3
TE Connectivity's 1825059-3 is a DIP switch with SPST function, 2 positions, and white actuator. With polyphenylene sulphide housing and copper alloy terminals, it offers 1000 cycles electrical life. Ideal for panel mounting applications with operating temperatures from -30 to 85°C.
219-5MSTR
219-5MSTR by Cts is a DIP & SIP switch with POLYETHYLENE housing, GOLD plating, and BERYLLIUM COPPER contacts. It has 5 switch sections, SPST function, and operates b/w -55 to 85 °C. Ideal for ON-OFF applications in electronics due to its high insulation resistance and wave solderability.
DS04-254-2-01BK-SMT-TR
Cui Devices
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: COPPER ALLOY; Minimum Operating Temperature: -40 Cel; null: COPPER ALLOY; Maximum Operating Temperature: 85 Cel;
A6FR-0101
DIP Switches; null: PIANO DIP SWITCH;
ADPA0204
TE Connectivity's ADPA0204 is a SPST Piano DIP Switch with 2 sections, 1000 cycles electrical life, and 1A max AC contact current. Ideal for applications requiring a durable switch with gold over nickel plating, such as consumer electronics and industrial control systems.
206-124RA
206-124RA by Cts is a SPDT slide DIP switch with 4 sections, gold terminal finish, and latched switch action. It has an electrical life of 10000 cycles and operates b/w -55 to 85°C. Ideal for applications requiring through-hole mounting in anti-static tube packaging.
76SB03ST
Grayhill
The Grayhill 76SB03ST is a slide DIP switch with SPST function and 3 switch sections. It has an electrical life of 2000 cycles, max DC contact voltage of 30V, and operates b/w -40 to 85°C. Ideal for applications requiring latched switch action, it features solder termination and through-hole mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-1825002-4
TE Connectivity 1-1825002-4 is a SPST slide DIP switch with 8 sections, gold over nickel plating, and copper alloy contacts. It has an electrical life of 1000 cycles and operates b/w -30 to 85°C. Ideal for applications requiring a latched switch action in through-hole mounting configurations.
1-1825059-7
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Electrical Life: 1000 Cycle(s); null: COPPER ALLOY; Sealing: TOP TAPE SEALED; null: SOLVENT;
TE Connectivity 1-1825059-7 is a SPST slide DIP switch with 4 positions. It features polyphenylene sulphide housing, copper alloy terminals, and gold-plated center contacts. With an electrical life of 1000 cycles, it is ideal for applications requiring OFF-ON contact function in electronics.
1-1825059-3
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SPST; Terminal Finish: Gold (Au); Insulation Resistance: 1000000000 ohm; Maximum DC Contact Voltage: 24 V;
TE Connectivity 1-1825059-3 is a SPST slide DIP switch with 4 positions. It features polyphenylene sulphide housing, copper alloy terminals, and gold-plated center contacts. With a max DC contact voltage of 24V and operating temperature range from -30 to 85°C, it is ideal for panel mounting applications requiring reliable OFF-ON switching capabilities.
1-1825059-8
TE Connectivity 1-1825059-8 is a SPST slide DIP switch with 4 positions. It has a polyphenylene sulphide housing, copper alloy terminals, and gold-plated center contacts. With an electrical life of 1000 cycles, it is ideal for panel mounting applications requiring a max DC contact current of 0.1A at 24VDC.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: BLACK; Maximum Contact DC Rating (R Load): 0.1A@24VDC; null: 300VAC; null: POLYPHENYLENE SULPHIDE;
1-1825006-5
DIP Switches; Mounting Feature: PANEL MOUNT; End Contact Plating: GOLD OVER NICKEL; null: 300VAC; Maximum Operating Temperature: 85 Cel; null: LATCHED;
1-1825058-9
TE Connectivity 1-1825058-9 is a SPST slide DIP switch with 8 positions and extended actuator type. It features gold over nickel plating, copper alloy terminals, and polyphenylene sulfide housing material. Ideal for applications requiring latched switch action, it has a max DC contact current of 0.1A@24VDC and insulation resistance of 1Gohm.
1-1825059-4
TE Connectivity 1-1825059-4 is a SPST slide DIP switch with 4 positions, 1000 cycles electrical life, and 100M ohm insulation resistance. It has a polyphenylene sulfide housing material and copper alloy terminals. Ideal for panel mounting applications requiring a compact design and reliable switching performance in temperatures ranging from -30 to 85°C.
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; null: SPST; null: COPPER ALLOY; null: POLYPHENYLENE SULPHIDE; null: FLUSH TYPE;
1-1825059-2
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Sealing: TOP TAPE SEALED; Minimum Operating Temperature: -30 Cel; Termination Type: SOLDER; null: SPST;
TE Connectivity 1-1825059-2 is a SPST slide DIP switch with 3 positions. It has a white actuator, polyphenylene sulphide housing, and copper alloy terminals. With an electrical life of 1000 cycles, it is ideal for applications requiring OFF-ON contact function at temperatures ranging from -30 to 85°C.
1-1825002-3
TE Connectivity's 1-1825002-3 is a DIP & SIP switch with a white actuator and polyphenylene sulphide housing material. It has a wave solderability and copper alloy terminals. This slide dip switch is commonly used in applications requiring ON-OFF contact function, such as PCBs, with a max DC contact current of 1A.
1-1825006-3
TE Connectivity 1-1825006-3 is a SPST slide DIP switch with 8 positions and 1000 cycles electrical life. Featuring polyphenylene sulfide housing, copper alloy terminals, and gold over nickel plating, it operates b/w -30 to 85°C. Ideal for applications requiring ON-OFF contact function in electronics PCBs.
1-1825059-5
DIP Switches; Mounting Feature: PANEL MOUNT; Body Length/Diameter: 12.14 mm; null: POLYPHENYLENE SULPHIDE; Maximum DC Contact Voltage: 24 V; Maximum Operating Temperature: 85 Cel;
DIP Switches; Mounting Feature: SURFACE MOUNT-STRAIGHT; Body Height: 3.5 mm; null: POLYPHENYLENE SULPHIDE; null: LATCHED; Maximum DC Contact Voltage: 24 V;
1-1825190-0
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; null: 12; End Contact Plating: TIN; Maximum DC Contact Voltage: 500 V; Minimum Operating Temperature: -30 Cel;
1-1825057-0
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Maximum DC Contact Current: 1 A; null: 12; null: LATCHED; Body Height: 3.5 mm;
1-1825002-0
DIP Switches; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Packing Method: TUBE; Maximum Contact DC Rating (R Load): .1A@24VDC; End Contact Plating: GOLD OVER NICKEL; null: SPST;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved