Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DPX202700DT-4162A1 by TDK is a surface mount DUPLEXER with Tx Insertion Loss of 0.5 dB and Rx Insertion Loss of 0.5 dB. It operates b/w -40 to 85 °C and has Transmit/Receive Center Frequency at 2205 MHz, making it ideal for RF communication applications.
Median Price
$0.356
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.470
100+ parts
$0.325
1k+ parts
$0.247
10k+ parts
$0.235
DigiKey
$0.540
$0.357
$0.291
$0.237
Arrow
-
$0.132
Verical
$0.131
Farnell
$0.339
$0.250
$0.244
Element14
$0.374
$0.261
$0.253
Newark
$0.390
$0.303
Chip1Stop
$0.272
$0.210
$0.168
Nova Conductors
$0.281
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Ampacity Inc.
$0.163
Netroflash
$0.275
Argo Parts USA
$0.273
Aztec Data Supply Inc.
$1.320
Corohmni
$2.888
Perfect Parts
Assy Fe
Continental Prestige Electronics
$0.193
$0.158
$0.147
Kepictronics
A duplexer filter allows for simultaneous transmitting and receiving on the same frequency band, making it ideal for duplex communication systems.
With a high maximum operating temperature, this duplexer can handle hot environmental conditions without compromising performance.
Low insertion loss during transmission ensures minimal signal loss and optimal performance of the duplex communication system.
With a low minimum operating temperature, this duplexer is suitable for use in cold environments without sacrificing functionality.
The compact width of 1.25mm allows for easy integration and compatibility with various devices and systems.
The small length of 2mm makes it suitable for applications where space is limited, without compromising on performance.
Surface mount installation offers ease of assembly and integration into circuit boards or devices, making it convenient for manufacturers.
The specified receive center frequency of 2205MHz ensures compatibility with a wide range of communication systems operating on this frequency.
Low insertion loss during reception helps maintain signal integrity and efficiency in duplex communication systems.
The transmit center frequency of 2205MHz aligns with the receive frequency, allowing for seamless transmit-receive operations in duplex communication.
The low height of 0.9mm enables the duplexer to be used in compact electronic devices or systems where space constraints are a consideration.
Duplexers DPX202700DT-4162A1 attributes and parameters. Explore more Duplexers devices from TDK
Additional Features:
Filter Type:
Height:
Rx Insertion Loss:
Tx Insertion Loss:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Receive Center Frequency:
Transmit Center Frequency:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
Hitano Enterprise
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
BAV99W-7-F
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
ACMD-6207-TR1
Broadcom
DUPLEXER; Minimum Operating Temperature: -40 Cel; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Packing Method: TR, 7 INCH; Height: .825 mm; Length: 2 mm;
ACFM-7045-BLK
DUPLEXER; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Height: .725 mm; Transmit Center Frequency: 1882.475 MHz; Length: 2.5 mm; Packing Method: TAPE;
ACMD-6207-BLK
DUPLEXER; Mounting Type: SURFACE MOUNT; Width (mm): 1.6; Tx Insertion Loss: 2.4 dB; Height: .825 mm; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE;
ACMD-7609-BLK
DUPLEXER; Height: .95 mm; Terminal Finish: Gold (Au); Tx Insertion Loss: 1.9 dB; JESD-609 Code: e4; Minimum Operating Temperature: -20 Cel;
ACMD-7617-BLK
DUPLEXER; Rx Insertion Loss: 2.2 dB; Receive Center Frequency: 2140 MHz; Mounting Type: SURFACE MOUNT; Transmit Center Frequency: 1977.6 MHz; Height: .95 mm;
ACMD-7411-TR1
DUPLEXER; Height: .825 mm; Length: 2 mm; Receive Center Frequency: 1879.5 MHz; Packing Method: TR, 7 INCH; Width (mm): 1.6;
ACMD-7612
DUPLEXER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3; Rx Insertion Loss: 2 dB; Additional Features: CW TRANSMIT POWER CONSIDERED WITH RESPECT TO OPERATING TEMP -40 TO 85; Height: 1.2 mm;
ACMD-6107-BLK
DUPLEXER; Maximum Operating Temperature: 85 Cel; Width (mm): 1.6; Dimensions: L2.0XB1.6XH0.825 (mm)/L0.079XB0.063XH0.032 (inch); Mounting Type: SURFACE MOUNT; Rx Insertion Loss: 2.5 dB;
ACFM-2113-BLK
DUPLEXER; Tx Insertion Loss: 2.5 dB; Packing Method: TAPE; Width (mm): 1.4; Maximum Operating Temperature: 100 Cel; Mounting Type: SURFACE MOUNT;
ACMD-6407-BLK
DUPLEXER; Height: .8 mm; Maximum Operating Temperature: 100 Cel; Length: 1.8 mm; Width (mm): 1.4; Tx Insertion Loss: 2.4 dB;
LFD21829MDKED859
Murata Manufacturing
Murata Manufacturing's LFD21829MDKED859 is a duplexer with Tx Insertion Loss of 0.5 dB and Rx Insertion Loss of 0.5 dB. Operating temperatures range from -40 to 85 °C, suitable for applications requiring a compact design at 2200 MHz frequency.
ACMD-6102-TR1
DUPLEXER; Height: .825 mm; Terminal Finish: Gold (Au); Mounting Type: SURFACE MOUNT; Tx Insertion Loss: 2.5 dB; Packing Method: TR;
D6HQ1G962DP39-Z
Taiyo Yuden
DUPLEXER;
ACMD-6025-BLK
DUPLEXER; Height: .85 mm; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -10 Cel; JESD-609 Code: e4;
HPMD-7905-TR1
DUPLEXER; Length: 11.88 mm; Additional Features: TAPE AND REEL; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 5.63;
HPMD-7904-TR1
DUPLEXER; No. of Terminals: 3; Mounting Type: SURFACE MOUNT; Rx Insertion Loss: 3.8 dB; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel;
DPX202700DT-4162A1
TDK
ACMD-6003-BLK
DUPLEXER; Transmit Center Frequency: 1747.5 MHz; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Receive Center Frequency: 1842.5 MHz; Width (mm): 2.0; No. of Terminals: 9;
AMCD-7602-TR1
DUPLEXER; Mounting Type: SURFACE MOUNT; Packing Method: TR; Length: 3 mm; Terminal Finish: GOLD; Rx Insertion Loss: 2 dB;
ACMD-7407
DUPLEXER; Maximum Operating Temperature: 85 Cel; Height: .95 mm; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Transmit Center Frequency: 1880 MHz; Length: 2.5 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DPX205950DT-9008A1
DUPLEXER; Tx Insertion Loss: 1.6 dB; No. of Terminals: 6; Rx Insertion Loss: .8 dB; Length: 2 mm; Transmit Center Frequency: 5425 MHz;
DPX202690DT-4049A2
DUPLEXER; Dimensions: L2.0XB1.25XH0.9 (mm)/L0.079XB0.049XH0.035 (inch); Receive Center Frequency: 832 MHz; Tx Insertion Loss: 1.2 dB; Width (mm): 1.25; Rx Insertion Loss: .3 dB;
DPX202700DT-4062A1
DUPLEXER; Mounting Type: SURFACE MOUNT; Additional Features: CENTER FREQ TX/RX: 829 MHZ; Transmit Center Frequency: 2205 MHz; Maximum Operating Temperature: 85 Cel; Rx Insertion Loss: .5 dB;
DPX252501DT-5124A2
DUPLEXER; Terminal Finish: TIN; JESD-609 Code: e3;
DPX202690DT-4084A5
DPX205950DT-9026A1
DUPLEXER; No. of Terminals: 6; Mounting Type: SURFACE MOUNT; Rx Insertion Loss: .5 dB; Transmit Center Frequency: 5425 MHz; Height: .5 mm;
DPX205950DT-9126A1
DUPLEXER; No. of Terminals: 6; Rx Insertion Loss: .5 dB; JESD-609 Code: e3; Tx Insertion Loss: .65 dB; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved