Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK DPX165850DT-8117A1 is a surface mount DUPLEXER with Tx Insertion Loss of 0.6 dB and Rx Insertion Loss of 0.4 dB. It operates at -40 to 85 °C, with Transmit Center Frequency at 5375 MHz and Receive Center Frequency at 2450 MHz. Ideal for applications requiring high-frequency signal filtering in compact spaces.
Median Price
$0.390
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.334
Vyrian
Ampacity Inc.
$0.580
Kepictronics
Authorized Procurement Solutions
Netroflash
$0.327
$0.317
$0.310
Having 4 terminals allows for efficient connection and communication between components in the system.
A Duplexer filter type ensures that the transmission and reception signals do not interfere with each other, leading to better signal quality.
The high operating temperature range of up to 85°C makes this product suitable for use in a variety of environments.
A low insertion loss of 0.6 dB ensures minimal signal loss during transmission, resulting in efficient signal transfer.
The low operating temperature limit of -40°C allows for reliable performance even in cold conditions.
The compact width of 0.8mm makes this product suitable for applications where space is limited.
A low VSWR of 1.23 indicates good impedance matching and efficient energy transfer within the system.
The short length of 1.6mm helps in reducing the overall size of the product, making it easier to integrate into electronic devices.
The surface mounting type allows for easy and secure installation of the product on PCBs, saving time and effort.
The receive center frequency of 2450 MHz enables the product to effectively capture incoming signals at this frequency.
The compact dimensions of the product make it suitable for small electronic devices where space is a constraint.
With a low insertion loss of 0.4 dB during reception, the product ensures efficient signal reception with minimal signal degradation.
The transmit center frequency of 5375 MHz allows the product to effectively transmit signals at this frequency.
The low height of 0.6mm adds to the compactness of the product, making it suitable for applications where thin profile is required.
Duplexers DPX165850DT-8117A1 attributes and parameters. Explore more Duplexers devices from TDK
Filter Type:
Height:
Rx Insertion Loss:
Tx Insertion Loss:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Receive Center Frequency:
Transmit Center Frequency:
Voltage Standing Wave Ratio:
Width (mm):
PCN Assembly/Origin - Additional Manufacturing Site 08/Feb/2019
PCN Packaging - Carrier Tape Material 04/Sep/2017
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diotec Electronics
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Lite-on Semiconductor
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
D6HL2G655DL06-Z
Taiyo Yuden
DUPLEXER;
DPX202690DT-4084A5
TDK
ACMD-6102-BLK
Broadcom
DUPLEXER; Tx Insertion Loss: 2.5 dB; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -20 Cel; Width (mm): 1.6; Dimensions: L2.0XB1.6XH0.825 (mm)/L0.079XB0.063XH0.032 (inch);
ACMD-7407-BLK
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Additional Features: ANTI-STATIC BAG; Maximum Operating Temperature: 85 Cel; Height: .95 mm; Transmit Center Frequency: 1880 MHz;
LFD182G45DCHD277
Murata Manufacturing
Murata Manufacturing's LFD182G45DCHD277 is a duplexer with Tx Insertion Loss of 0.6 dB, Rx Insertion Loss of 0.45 dB, and VSWR of 1.8. It operates at temperatures ranging from -40 to 85 °C and is ideal for applications requiring frequency separation in wireless communication systems.
DPX4254-B
Coilcraft
Coilcraft's DPX4254-B is a F FEMALE input duplex filter with Tx/Rx insertion loss of 1.5 dB, operating from -40 to 85°C. With dimensions of L35.56xB20.57xH12.95 mm, it is ideal for through-hole mounting in applications requiring high-performance duplexers.
DIP2450-01D3
ACMD-7612-TR1
DUPLEXER; Mounting Type: SURFACE MOUNT; Package Material: PLASTIC; Tx Insertion Loss: 1.6 dB; Height: 1.2 mm; Maximum Operating Temperature: 85 Cel;
FAR-D5PF-881M50-M3E9-Z
AMCD-7602-BLK
DUPLEXER; JESD-609 Code: e4; Additional Features: ANTI-STATIC BAG; Height: 1.2 mm; Minimum Operating Temperature: -30 Cel; Rx Insertion Loss: 2 dB;
DPX165850DT-8040B1
HPMD-7904-TR1
DUPLEXER; No. of Terminals: 3; Mounting Type: SURFACE MOUNT; Rx Insertion Loss: 3.8 dB; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel;
ACMD-6007-TR1
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Height: .95 mm; Packing Method: TR; Additional Features: POWER CAPTURED WITH RESPECT TO -40 TO 85 TEMP RANGE; TAPE AND REEL; Minimum Operating Temperature: -20 Cel;
AM1230-1565D1012
Anatech Electronics
0900FM15K0039E
Johanson Technology
0900FM15K0039E by Johanson Technology is a duplexer with a Tx insertion loss of 1.4 dB and an Rx insertion loss of 2 dB. It operates at temperatures ranging from -40 to 85 °C and has dimensions of 2mm x 1.25mm x 0.8mm. This duplexer is suitable for surface mount applications in the frequency range of 895 MHz.
DPX205950DT-9126A1
The TDK DPX205950DT-9126A1 is a duplexer with 6 terminals, Tx Insertion Loss of 0.65 dB, and Rx Insertion Loss of 0.5 dB. It operates b/w -40 to 85 °C and has Transmit Center Frequency at 5425 MHz and Receive Center Frequency at 2450 MHz. Ideal for surface mount applications in various electronic devices requiring signal filtering.
ACMD-6125-TR1
DUPLEXER; Height: .825 mm; Rx Insertion Loss: 3.8 dB; Receive Center Frequency: 1962.5 MHz; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT;
LFD182G45DCJD247
Murata Manufacturing's LFD182G45DCJD247 is a Duplexer with Tx Insertion Loss of 0.6 dB and Rx Insertion Loss of 0.6 dB. It operates b/w -40 to 85 °C, suitable for applications requiring Transmit and Receive Center Frequency at 5425 MHz.
ACMD-7617-BLK
DUPLEXER; Rx Insertion Loss: 2.2 dB; Receive Center Frequency: 2140 MHz; Mounting Type: SURFACE MOUNT; Transmit Center Frequency: 1977.6 MHz; Height: .95 mm;
ACFM-7024-TR1
DUPLEXER; Height: .75 mm; Width (mm): 2.0; Additional Features: TR, 7 INCH; JESD-609 Code: e4; Mounting Type: SURFACE MOUNT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DPX1608LL80R2455A
Yageo
Duplexers;
DPX105850DT-6019A1
DUPLEXER; Additional Features: CENTER FREQ TX/RX: 2450 MHZ; Length: 1 mm; Width (mm): 0.5; Tx Insertion Loss: 1.5 dB; Mounting Type: SURFACE MOUNT;
DPX165950DT-8126A1
DPX165950DT-8126A1 by TDK is a surface mount Duplexer with Tx Insertion Loss of 1.4 dB and Rx Insertion Loss of 1.4 dB. Operating temperatures range from -40°C to 85°C, making it suitable for applications requiring a duplex filter at a center frequency of 5425 MHz.
DPX165950DT-8144A1
DUPLEXER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Rx Insertion Loss: .65 dB; Transmit Center Frequency: 4175 MHz; Length: 1.6 mm;
DPX105950DT-6112A2
DUPLEXER; Rx Insertion Loss: .6 dB; Minimum Operating Temperature: -40 Cel; Dimensions: L1.0XB0.5XH0.33 (mm)/L0.039XB0.02XH0.013 (inch); Receive Center Frequency: 2450 MHz; Tx Insertion Loss: 1 dB;
DPX165950DT-8026A1
DUPLEXER; Minimum Operating Temperature: -40 Cel; Receive Center Frequency: 2448 MHz; Length: 1.6 mm; Rx Insertion Loss: .6 dB; Width (mm): 0.8;
DPX165950DT-8148A1
DUPLEXER; Maximum Operating Temperature: 85 Cel; Length: 1.6 mm; Minimum Operating Temperature: -40 Cel; Mounting Type: SURFACE MOUNT; Rx Insertion Loss: .67 dB;
DPX165950DT-8145A1
DPX165850DT-8017A1
DUPLEXER; Voltage Standing Wave Ratio: 1.24; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Height: .6 mm; No. of Terminals: 4;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved