Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK's CGA2B2C0G1H102J050BA is a ceramic capacitor with capacitance of 0.001uF, rated for 50V. It has C0G temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
Median Price
$0.034
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Newark
1+ parts
$0.131
100+ parts
$0.049
1k+ parts
10k+ parts
$0.029
Future Electronics
$0.380
$0.310
$0.215
$0.177
Chip1Stop
-
$0.043
$0.013
Verical
$0.028
$0.020
Element14
$0.027
Farnell
$0.023
$0.018
Arrow
Nova Conductors
Ozdisan Elektronik
$0.082
TME
$0.120
$0.037
$0.021
IBS Electronics
$0.536
$0.437
$0.303
$0.125
Vyrian
Sensible Micro Corp
Rutronik
$0.016
NAC Semi
Prism Electronics
Elcom Components
Semtec, LLC
PC Components Company LLC
Bristol Electronics
Diverse Electronics
Semicontronic
$0.010
Ampacity Inc.
Argo Parts USA
$0.048
Corohmni
$0.407
Advanced Electronics
$0.411
$0.390
Aztec Data Supply Inc.
$0.420
Eastek
GreenTree Electronics
Glotronic Ltd.
Robosynatics
Lucentia Tech
$0.322
$0.316
Continental Prestige Electronics
Abacus Technologies
Authorized Procurement Solutions
Netroflash
$0.047
$0.046
Ceramic is a reliable and stable dielectric material for capacitors, providing high insulation resistance and low loss at high frequencies.
Rectangular package shape allows for efficient use of space and easy integration into circuit boards.
Multi-layer construction provides high capacitance in a compact size, making it suitable for applications with limited space.
TR packing method ensures components are safe during transportation and handling, minimizing the risk of damage.
Surface-mount technology (SMT) package style allows for easy and automated assembly, saving time and cost in manufacturing processes.
A tight negative tolerance of 5% ensures consistent performance and accuracy in capacitance values.
C0G temperature characteristics indicate a stable capacitance over a wide temperature range, suitable for high precision applications.
With a high maximum operating temperature of 125°C, this capacitor is suitable for a wide range of operating conditions.
The capacitance value of 0.001 uF is suitable for filtering and decoupling applications in circuits, providing reliable performance.
With a high rated DC voltage of 50V, this capacitor can withstand voltage fluctuations and provide stable performance in various circuit designs.
Fixed Capacitors CGA2B2C0G1H102J050BA attributes and parameters. Explore more Fixed Capacitors devices from TDK
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
CGA2B2C0G1H102J050BA Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Part Number - MLCC Part Number Change 30/Nov/2012
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Sangdest Microelectronics (Nanjing)
Taitron Components
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Transistor & Electronic
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200168
WIRE AND CABLE;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
08055C103KAT2A
KYOCERA AVX
08055C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for applications requiring compact size and high reliability in a wide temperature range from -55 to 125°C.
M39006/22-0345
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/22-0377
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 68 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0805C223K5RACTU
KEMET Corporation
The KEMET C0805C223K5RACTU is a ceramic capacitor with 0.022uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
NACE4R7M50V5X5.5TR13F
Nic Components
NACE4R7M50V5X5.5TR13F by Nic Components is a 4.7uF, 50V aluminum electrolytic capacitor with tan delta of 0.10 and leakage current of 0.003mA. It is used in SMT applications due to its compact size (5x5.3x5.5mm) and high ripple current capacity of 23mA, suitable for various electronic devices requiring stable capacitance performance at temperatures ranging from -40°C to 85°C.
0603ZC104KAT2A
0603ZC104KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 10V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
440LS10-R
Vishay Intertechnology's 440LS10-R is a ceramic capacitor with 0.01 uF capacitance, rated at 760 V AC. It has a temperature coefficient of -56/+22% and operates b/w -30 to 125 °C. Ideal for applications requiring fixed capacitors in bulk packaging with radial terminal style.
CC0805KKX5R6BB106
Yageo
Yageo CC0805KKX5R6BB106 is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package design.
04023C103KAT2A
04023C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, rated at 25V. With X7R temperature characteristics and -55 to 125°C operating range, it's ideal for compact electronic devices requiring stable performance in harsh environments. Its multi-layer design and wraparound terminals ensure reliable connectivity and space-saving installation.
564R60GAD22
Vishay Intertechnology's 564R60GAD22 is a ceramic capacitor with capacitance of 0.0022 uF and rated DC voltage of 6000 V. With negative tolerance of 20%, it operates b/w -25 to 105 °C, making it suitable for various fixed capacitor applications. Featuring radial package style, matte tin terminal finish, and through hole mount, this component offers reliable performance in electronic circuits.
M39006/250052
Cornell Dubilier Electronics
M39006/250052 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 120 uF and rated DC voltage of 50 V. It has a tan delta of 0.225 and leakage current of 0.004 mA, making it suitable for applications requiring high ripple current and low leakage.
C1210C476M4PACTU
C1210C476M4PACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 47 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 85 °C. This surface mount capacitor is commonly used in electronic circuits for various applications.
C0603C106M9PACTU
KEMET C0603C106M9PACTU is a 10uF ceramic capacitor with 6.3V URdc, X5R temp characteristics, and 20% tolerance. Ideal for SMT applications in electronics due to compact 1.6x0.8mm size and -55 to 85°C operating range. Suitable for various devices requiring stable capacitance under changing conditions.
UWT1H4R7MCL1GB
Nichicon
Nichicon UWT1H4R7MCL1GB is a 4.7uF aluminum electrolytic capacitor with 50V URdc, suitable for AEC-Q200 standards. It features low tan delta of 0.14 and leakage current of 0.003mA, ideal for automotive applications requiring high ripple current handling up to 19mA in a surface mount package style.
EEEFK1H471AM
Panasonic
Panasonic EEEFK1H471AM is a 470uF Aluminum Electrolytic Capacitor with 50V URdc. It features Tan Delta of 0.12, Leakage Current of 0.235mA, and Ripple Current of 1207.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
C0805C105K5RACTU
KEMET C0805C105K5RACTU is a ceramic capacitor with 1uF capacitance, rated at 50V. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring compact rectangular package design.
C0805C104K5RACTU
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
GCM155R71H104KE02J
Murata Manufacturing
Murata Manufacturing's GCM155R71H104KE02J is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
08055C473JAT2A
08055C473JAT2A by KYOCERA AVX is a ceramic capacitor with 0.047uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications due to its compact size (2.01x1.25x0.94mm) and wraparound terminals for easy mounting in various electronic devices.
06035A101JAT2A
06035A101JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. Its SMT package style makes it suitable for surface mounting feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CGA2B3X7R1H104K050BB
The TDK CGA2B3X7R1H104K050BB is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
CGA2B2X7R1E103K050BA
TDK's CGA2B2X7R1E103K050BA is a ceramic capacitor with capacitance of 0.01uF, rated at 25V DC. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CGA2B3X7R1H473K050BB
TDK's CGA2B3X7R1H473K050BB is a SMT ceramic capacitor with 0.047 uF capacitance, 50V URdc, and X7R temperature code. Ideal for AEC-Q200 applications requiring compact design, it operates b/w -55 to 125 °C with ±10% tolerance. Its multi-layer structure and matte tin finish make it suitable for automotive electronics.
CGA2B3X7R1H104K050BD
TDK's CGA2B3X7R1H104K050BD is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55°C to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
CGA2B3X7R1H103K050BB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B3X7R1H104K050BE
CGA2B3X7R1H104K050BE by TDK is a ceramic capacitor with 0.1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 compliance and compact 0402 size. With a wide operating temperature range from -55°C to 125°C, it offers reliable performance in harsh environments.
CGA2B3X7R1E104K050BB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B1X7R1C104K050BC
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B2X7R1H102K050BA
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B3X7R1E224K050BB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B3X7R1H103K050BE
TDK's CGA2B3X7R1H103K050BE is a ceramic capacitor with capacitance of 0.01uF, rated at 50V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
CGA2B2C0G1H101J050BA
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B1X7R1V224K050BC
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B2X7R1H332K050BA
TDK's CGA2B2X7R1H332K050BA is a ceramic capacitor with capacitance of 0.0033uF, rated at 50V DC. With X7R temperature characteristics and -55 to 125°C operating range, it suits automotive applications meeting AEC-Q200 standard. Its SMT package style and compact dimensions make it ideal for surface mount designs.
CGA2B2C0G1H271J050BA
TDK's CGA2B2C0G1H271J050BA is a ceramic capacitor with capacitance of 0.00027uF and rated DC voltage of 50V. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for automotive applications meeting AEC-Q200 standard.
CGA2B2C0G1H080D050BA
TDK's CGA2B2C0G1H080D050BA is a ceramic capacitor with capacitance of 0.000008 uF, rated at 50V. With C0G temperature characteristics and 30ppm/°C temp coef, it operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics meeting AEC-Q200 standard.
CGA2B1X7S1C474K050BC
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B2X7R1H472K050BA
TDK's CGA2B2X7R1H472K050BA is a 0402 SMT ceramic capacitor with 0.0047 uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it suits automotive applications meeting AEC-Q200 standard. Its compact size of 1x.5x.5 mm makes it ideal for surface mount designs in harsh environments.
CGA2B3X7S2A103K050BB
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
CGA2B2C0G1H102J050BD
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved