Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK's B39781B5199U410 SAW Filter has 6 terminals, operates b/w -20°C to 85°C, with a width of 3.0mm. It offers a max insertion loss of 4 dB at 780.5 MHz and impedance of 50Ω. Ideal for applications requiring surface mount filters in the frequency range around 780 MHz.
Median Price
$5.000
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Mouser Electronics
1+ parts
100+ parts
$3.400
1k+ parts
$2.850
10k+ parts
$2.730
Sensible Micro Corp
-
Authorized Procurement Solutions
Having 6 terminals allows for more connections and flexibility in circuit design.
SAW filters are known for their high performance and reliability in filtering out unwanted frequencies.
The high maximum operating temperature ensures the filter can withstand temperature variations in different environments.
The low minimum operating temperature makes this filter suitable for use in colder environments.
The compact width of 3.0mm allows for easy integration into various electronic devices.
The low insertion loss of 4 dB indicates minimal signal loss when passing through the filter.
The specific center/cutoff frequency of 780.5 MHz is ideal for filtering out signals at this frequency.
The 50 ohm input impedance ensures compatibility with a wide range of electronic devices.
The short length of 3mm helps in saving space and making the filter suitable for compact designs.
The 50 ohm output impedance ensures proper signal transmission from the filter to the next component.
The surface mount design allows for easy and secure mounting on circuit boards.
The compact dimensions make this filter suitable for applications where space is limited.
The low height of 1.1mm allows for slim and sleek designs in electronic devices.
SAW Filters B39781B5199U410 attributes and parameters. Explore more SAW Filters devices from TDK
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Width (mm):
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
BSS138DW-7-F
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
ULN2803A
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3906LT1G
Onsemi
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Secos
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
4554
Jw Miller Magnetics
Other Semiconductors;
Mde Semiconductor
EU2B-YS3203C
Idec
ROTARY SWITCH;
B686
SAW FILTER; Center/Cutoff Frequency (fo/fc): 480 MHz;
ACPF-7001-BLK
Broadcom
SAW FILTER; Height: 1.25 mm; Dimensions: L3.0XB3.0XH1.25 (mm)/L0.118XB0.118XH0.049 (inch); Package Material: PLASTIC; Manufacturer Series: ACPF-7001; No. of Terminals: 9;
B39871B4316P810
TDK
The TDK B39871B4316P810 is a SAW filter with 5 terminals, operating from -40 to 85°C. It offers a max insertion loss of 2.9 dB at 869 MHz and has an impedance of 50 ohms. Ideal for automotive applications due to AEC-Q200 screening level compliance.
B39431B3748H110
Rf360 Europe
SAW FILTER; No. of Terminals: 6; Center/Cutoff Frequency (fo/fc): 434.42 MHz; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 2.6 dB; Minimum Operating Temperature: -45 Cel;
B39232B3416U410
SAW FILTER; No. of Terminals: 6; Length: 3 mm; No. of Functions: 1; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Minimum Operating Temperature: -40 Cel;
SF0154BA03191S
Renesas Electronics
SAW FILTER; Height: 2 mm; Maximum Insertion Loss: 12 dB; Impedance (Input): 50 OHM; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SF2321D
Murata Manufacturing
Murata Manufacturing's SF2321D is a SAW FILTER with 6 terminals, operating from -40 to 85 °C. It has a width of 4.0mm and max insertion loss of 3 dB at 1090 MHz. Ideal for applications requiring a surface mount filter with 50 OHM impedance.
B39721B5326U410
The TDK B39721B5326U410 SAW Filter has 2 functions, 6 terminals, and operates b/w -40°C to 85°C. With a width of 3mm and height of 1.1mm, it offers a max insertion loss of 4.2 dB at a center frequency of 725.5 MHz. Ideal for applications requiring surface mount filters with an impedance of 50Ω.
B39921B3728U410
The TDK B39921B3728U410 SAW Filter has 6 terminals, operates b/w -40°C to 85°C, with a width of 3.0mm. It offers a max insertion loss of 4 dB at 915 MHz and is ideal for applications requiring a surface mount filter with an impedance of 50 OHM.
SF0127CN02333S
SAW FILTER; Width (mm): 9.0; Center/Cutoff Frequency (fo/fc): 127.5 MHz; No. of Terminals: 10; No. of Functions: 1; Impedance (Input): 50 OHM;
B39162B3413U410
SAW FILTER; Width (mm): 3.0; Height: 1.1 mm; Dimensions: L3.0XB3.0XH1.1 (mm)/L0.118XB0.118XH0.043 (inch); Additional Features: AEC-Q200; Maximum Operating Temperature: 85 Cel;
B39431B3710U410
TDK's B39431B3710U410 SAW Filter features 6 terminals, 3.1 dB max insertion loss, and 433.92 MHz center frequency. Ideal for applications requiring a compact surface mount filter with a cutoff frequency of 105°C to -40°C temperature range and impedance of 50 OHM.
SF1216BA02526S
SAW FILTER; Dimensions: L3.0XB3.0XH1.4 (mm)/L0.118XB0.118XH0.055 (inch); Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Output Impedance (ohm): 200 OHM; Length: 3 mm;
B4822
SAW FILTER; No. of Terminals: 10; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 70 Cel; Package Material: CERAMIC; JESD-609 Code: e0;
SF0036BA02217T
SAW FILTER; Center/Cutoff Frequency (fo/fc): 35.7 MHz; Length: 35.05 mm; Height: 5.1 mm; Output Impedance (ohm): 50 OHM; Width (mm): 20.57;
B4207
SAW FILTER; JESD-609 Code: e0; Maximum Operating Temperature: 80 Cel; Package Material: CERAMIC; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -30 Cel;
B39871B3744H110
SAW FILTER; Dimensions: L3.0XB3.0XH1.0 (mm)/L0.118XB0.118XH0.039 (inch); Minimum Operating Temperature: -45 Cel; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Maximum Insertion Loss: 3.7 dB;
854909
Qorvo
Qorvo's 854909 SAW Filter features 12 terminals, gold finish with nickel barrier, and 6.5mm width. With a center frequency of 140 MHz and max insertion loss of 12.5 dB, it is ideal for applications requiring a 50 OHM impedance such as wireless communication systems.
SAFFB1G56AC0F0AR1X
Murata Manufacturing's SAFFB1G56AC0F0AR1X is a SAW filter with 2 dB max insertion loss, 1561.1 MHz center frequency, and 50 OHM impedance. Ideal for surface mount applications in temperature range -30 to 85 °C, commonly used in RF communication systems.
B4703
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 80 Cel; No. of Terminals: 6; Package Material: CERAMIC; JESD-609 Code: e0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved