Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LSXND6060WHL1R5NMG by Taiyo Yuden is a fixed inductor with 1.5uH nominal inductance, 4.2A max rated current, and 78MHz self-resonance frequency. Ideal for power applications, this SMT inductor has a rectangular package, operates b/w -25°C to 125°C, and features dual-ended terminals.
Median Price
$0.126
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.260
100+ parts
$0.178
1k+ parts
$0.147
10k+ parts
-
Avnet
TTI
$0.117
Chip1Stop
$0.066
$0.052
$0.049
Verical
$0.162
$0.110
Nova Conductors
Ampacity Inc.
$0.056
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Allows for easy and convenient mounting on PCBs, saving space and reducing assembly time.
Ideal for power applications requiring a moderate level of inductance.
Capable of handling high currents, making it suitable for power applications.
Low resistance minimizes power loss and improves efficiency of the circuit.
Ferrite core provides high magnetic permeability and low core losses, improving overall performance.
Fixed Inductors LSXND6060WHL1R5NMG attributes and parameters. Explore more Fixed Inductors devices from Taiyo Yuden
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
LSXND6060WHL1R5NMG Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
0460-202-16141
TE Connectivity
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Telcom Semiconductor
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Crystalonics
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
36501E3N9JTDG
TE Connectivity's 36501E3N9JTDG is a surface mount fixed inductor with dual-ended terminals, ideal for RF applications. Featuring a nominal inductance of 0.0039 uH and max rated current of 0.84 A, this general purpose inductor operates b/w -40 to 125 °C with a self-resonance frequency of 5800 MHz.
LQW15AN12NG00D
Murata Manufacturing
LQW15AN12NG00D by Murata is a wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 5500 MHz. This SMT inductor features dual-ended terminals and matte tin finish over nickel, making it ideal for general purpose use.
IHLP2020CZER5R6M11
Vishay Intertechnology
Vishay Intertechnology's IHLP2020CZER5R6M11 is a shielded, high current inductor with 5.6uH nominal inductance and 4.2A max rated current. Ideal for general purpose applications, this SMT inductor features a self-resonance frequency of 21MHz and operates b/w -55°C to 125°C.
74404052047
Wuerth Elektronik & Kg
Wurth Elektronik 74404052047 is a shielded SMT inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 2.3A, operating temperature range from -40 to 125°C, and self-resonance frequency of 57MHz. Ideal for general purpose use with AEC-Q200 reference standard compliance.
5610
Bourns
The Bourns 5610 is a fixed inductor with 5uH nominal inductance, suitable for RF applications. Featuring radial terminal placement, it has a max rated current of 20A and operates b/w -55°C to 105°C. Ideal for general purpose use due to its ferrite core material and cylindrical package design.
DR127-100-R
Eaton Corporation
Eaton Corporation's DR127-100-R is a shielded, surface mount fixed inductor with 10uH nominal inductance and 6.04A max rated current. Ideal for power applications, this general purpose inductor has a dual-ended terminal placement and operates b/w -40°C to 125°C.
DR125-100-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SRU2013-150Y
Bourns SRU2013-150Y is a shielded, surface mount inductor with 15uH nominal inductance and 0.85 ohm DC resistance. Ideal for power applications, it operates b/w -40 to 125°C with a max rated current of 0.46A. Its ferrite core and self-resonance frequency of 30MHz make it suitable for general purpose use.
SRU1048-6R8Y
Bourns SRU1048-6R8Y is a shielded SMT inductor with 6.8uH nominal inductance, 4.8A max current, and -40 to 125°C operating temp range. Ideal for power applications due to its general purpose design and ferrite core material.
CD54NP-101KC
Sumida
Sumida CD54NP-101KC is a fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. It is a power inductor for general purpose applications, featuring dual-ended terminals and ferrite core material. Ideal for SMT designs with a compact 2422 case size.
LQM21NNR68K10D
Murata Manufacturing's LQM21NNR68K10D is an 0805 fixed inductor with 0.68uH nominal inductance, suitable for RF applications. It features a max operating temperature of 85°C, 0.15A rated current, and Q measured at 25MHz. This shielded SMT inductor has a ferrite core and wraparound terminals.
5230
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Minimum Operating Temperature: -55 Cel;
IHLP2525CZER100M01
Vishay Intertechnology's IHLP2525CZER100M01 is a shielded, surface mount fixed inductor with 10uH nominal inductance and 3A max rated current. Ideal for high current applications, this rectangular package features dual-ended terminals and operates b/w -55°C to 125°C.
2312-H-RC
The Bourns 2312-H-RC is a shielded fixed inductor with 100uH nominal inductance, suitable for high current applications. It has a max rated current of 7A, DC resistance of 0.037 ohm, and operates b/w -55 to 105°C. Ideal for general purpose use due to its radial terminal placement and toroidal package style.
NR6028T4R7M
Taiyo Yuden
NR6028T4R7M by Taiyo Yuden is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 2.7A max rated current. It is a general purpose inductor suitable for power applications, featuring a self-resonance frequency of 39MHz and operating temperature range from -25°C to 120°C.
NRS4018T100MDGJ8
NRS4018T100MDGJ8 by Taiyo Yuden is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it has a self-resonance frequency of 25MHz and operates b/w -40 to 125°C.
XAL6060-103MEC
Coilcraft
Coilcraft XAL6060-103MEC is a shielded, surface mount fixed inductor with 10uH nominal inductance and 7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 14MHz.
B82464G4683M000
TDK
TDK's B82464G4683M000 is a shielded, surface mount fixed inductor with 68uH nominal inductance. It operates b/w -55 to 150°C, handles up to 1.3A current, and has a DC resistance of 0.13 ohm. Ideal for power applications requiring a general purpose inductor with AEC-Q200 standard compliance.
SLF10145T-101M1R0-PF
SLF10145T-101M1R0-PF by TDK is a shielded, surface mount fixed inductor with 100uH nominal inductance and 1.1A max rated current. Ideal for power applications, this general purpose inductor has a DC resistance of 0.2 ohm and operates b/w -40°C to 105°C temperature range.
CTX100-2-52LP-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Manufacturer Series: CTX100-2-52LP-R;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LSXNE2424MKT6R8MNG
LSXND5050YAL2R2NMG
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LSXNE3030KKT330MN
LSXNH8080YKL100MJG
LSXND4040MKL470MDG
LSXND4040TKL4R7MDG
LSXND4040TKL4R7MDG by Taiyo Yuden is a 4.7uH power inductor with 1.7A max current, ideal for general purpose applications. It features dual-ended terminals, operates b/w -25 to 125°C, and has a self-resonance frequency of 35MHz. Perfect for SMT designs requiring compact rectangular packages.
LSXND5050WKTR47NMG
LSXND6060WHL6R8MMG
LSXND4040MKL4R7MDG
LSXND4040TKL100MDG
LSXND4040TKL1R0NDG
LSXND4040TKL220MDG
LSXND4040TKL330MDG
LSXND5050XKT330MMG
LSXND6060WHL220MMG
LSXNH8080YKL150MJG
LSXND6060WHL100MMG
LSXND6060WHL101MMG
LSXND6060WHL101MMG by Taiyo Yuden is a fixed inductor with 100uH nominal inductance, 0.78 ohm DC resistance, and 3MHz self-resonance frequency. Ideal for power applications, this SMT inductor has a max operating temperature of 125°C and is designed as a general-purpose component.
LSXND6060WHL150MMG
LSXND6060WHL4R7MMG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved