Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FI168P157525-T by Taiyo Yuden is a surface mount duplexer with Tx Insertion Loss of 0.7 dB and Rx Insertion Loss of 0.7 dB. Operating temperature ranges from -40°C to 85°C, suitable for applications requiring a Voltage Standing Wave Ratio of 2 at 2450 MHz frequency.
Median Price
$0.306
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Newark
1+ parts
$0.098
100+ parts
-
1k+ parts
10k+ parts
Farnell
$0.469
Element14
$1.320
$0.834
$0.658
$0.632
Verical
$0.143
$0.139
Nova Conductors
$0.454
Vyrian
Ampacity Inc.
$0.083
Argo Parts USA
$0.441
Continental Prestige Electronics
Authorized Procurement Solutions
Netroflash
$0.445
$0.432
$0.423
Having a duplexer filter allows for the simultaneous transmission and reception of signals on the same frequency, making this product suitable for two-way communication systems.
With a high maximum operating temperature, this product can withstand higher temperature environments without compromising performance.
Low insertion loss during transmission ensures minimal signal loss, leading to efficient communication.
The low minimum operating temperature enables this product to function effectively in cold environments.
Having a compact width makes this product suitable for applications where space is limited.
A low VSWR value indicates efficient power transfer and optimal performance in signal transmission.
The small length of this product contributes to its compact design, making it ideal for integration into various devices.
The tape and paper packing method ensures secure packaging and ease of handling during shipment and installation.
Surface mount installation simplifies the integration of this product onto circuit boards, enhancing overall efficiency and ease of assembly.
The specified receive center frequency indicates the range of frequencies this duplexer can handle, making it suitable for communication within the 2450 MHz band.
Similar to the Tx insertion loss, low reception insertion loss ensures signal integrity and overall performance during signal reception.
The specified transmit center frequency aligns with the receive center frequency, allowing seamless communication within the designated frequency range.
The low height profile of this product contributes to its compact form factor and enables integration into space-constrained devices or systems.
Duplexers FI168P157525-T attributes and parameters. Explore more Duplexers devices from Taiyo Yuden
Additional Features:
Filter Type:
Height:
Rx Insertion Loss:
Tx Insertion Loss:
Length:
Mounting Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Receive Center Frequency:
Transmit Center Frequency:
Voltage Standing Wave Ratio:
Width (mm):
PCN Part Status Change - Mult Devs NRND 01/Apr/2023
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hitano Enterprise
Vicor
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Gec Plessey Semiconductors
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
DPX202700DT-4162A1
TDK
DPX202700DT-4162A1 by TDK is a surface mount DUPLEXER with Tx Insertion Loss of 0.5 dB and Rx Insertion Loss of 0.5 dB. It operates b/w -40 to 85 °C and has Transmit/Receive Center Frequency at 2205 MHz, making it ideal for RF communication applications.
ACMD-6003-BLK
Broadcom
DUPLEXER; Transmit Center Frequency: 1747.5 MHz; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Receive Center Frequency: 1842.5 MHz; Width (mm): 2.0; No. of Terminals: 9;
ACMD-7601-BLK
DUPLEXER; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -30 Cel; Manufacturer Series: ACMD-7601; Dimensions: L3.8XB3.8XH1.2 (mm)/L0.15XB0.15XH0.047 (inch);
TQQ1030
Qorvo
TQQ1030 by Qorvo is a surface mount duplexer with Tx Insertion Loss of 2.3 dB and Rx Insertion Loss of 2.8 dB. It operates b/w -20°C to 90°C, with Transmit Center Frequency at 2310 MHz and Receive Center Frequency at 2355 MHz. Ideal for applications requiring high-performance duplexing in compact spaces.
B39771B8035P810
Rf360 Europe
DUPLEXER; Minimum Operating Temperature: -10 Cel; Packing Method: TR, 7 INCH; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Tx Insertion Loss: 3.2 dB;
ACMD-6025-TR1
DUPLEXER; Minimum Operating Temperature: -10 Cel; Terminal Finish: Gold (Au); Mounting Type: SURFACE MOUNT; Height: .85 mm; No. of Terminals: 9;
DPX205950DT-9026A1
DPX205950DT-9026A1 by TDK is a duplexer with 6 terminals, Tx Insertion Loss of 0.65 dB, and Rx Insertion Loss of 0.5 dB. It operates b/w -40 to 85 °C and has Transmit Center Frequency at 5425 MHz and Receive Center Frequency at 2450 MHz. Ideal for surface mount applications due to its compact dimensions of L2.0XB1.25XH0.5 mm.
TDX1227
Vectron International
DUPLEXER; Packing Method: TR, 13 INCH; Height: 1.5 mm; Rx Insertion Loss: 3.5 dB; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Minimum Operating Temperature: -40 Cel;
HPMD-7904-TR1
DUPLEXER; No. of Terminals: 3; Mounting Type: SURFACE MOUNT; Rx Insertion Loss: 3.8 dB; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel;
ACMD-7614-TR1
DUPLEXER; Transmit Center Frequency: 1950 MHz; Rx Insertion Loss: 2.3 dB; No. of Terminals: 9; Packing Method: TR; Additional Features: TAPE AND REEL; POWER CAPTURED WITH RESPECT TO -40 TO 85 TEMP RANGE;
D6HQ1G962DP39-Z
Taiyo Yuden
DUPLEXER;
D6PF1G960M3B6-Z
ACMD-7609
DUPLEXER; Transmit Center Frequency: 1732.5 MHz; Width (mm): 2.0; No. of Terminals: 9; Height: .95 mm; Additional Features: CW TRANSMIT POWER CONSIDERED WITH RESPECT TO OPERATING TEMP -40 TO 85;
ACFM-2113-BLK
DUPLEXER; Tx Insertion Loss: 2.5 dB; Packing Method: TAPE; Width (mm): 1.4; Maximum Operating Temperature: 100 Cel; Mounting Type: SURFACE MOUNT;
ACMD-7407
DUPLEXER; Maximum Operating Temperature: 85 Cel; Height: .95 mm; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Transmit Center Frequency: 1880 MHz; Length: 2.5 mm;
ACMD-7602-BLK
DUPLEXER; Transmit Center Frequency: 1950 MHz; Minimum Operating Temperature: -30 Cel; Rx Insertion Loss: 2 dB; Receive Center Frequency: 2140 MHz; Mounting Type: SURFACE MOUNT;
ACMD-7407-BLK
DUPLEXER; Dimensions: L2.5XB2.0XH0.95 (mm)/L0.098XB0.079XH0.037 (inch); Additional Features: ANTI-STATIC BAG; Maximum Operating Temperature: 85 Cel; Height: .95 mm; Transmit Center Frequency: 1880 MHz;
DPX202690DT-4049A2
The TDK DPX202690DT-4049A2 is a 6-terminal duplex filter with Tx Insertion Loss of 1.2 dB and Rx Insertion Loss of 0.3 dB. It operates b/w -40 to 85°C, with Transmit Center Frequency at 2200 MHz and Receive Center Frequency at 832 MHz. Ideal for surface mount applications due to its compact dimensions of L2.0XB1.25XH0.9 (mm).
ACFM-2021-TR1
DUPLEXER; Dimensions: L1.8XB1.4XH0.8 (mm)/L0.071XB0.055XH0.031 (inch); Width (mm): 1.4; Height: .8 mm; Additional Features: TR, 7 INCH; Mounting Type: SURFACE MOUNT;
AMCD-7602-BLK
DUPLEXER; JESD-609 Code: e4; Additional Features: ANTI-STATIC BAG; Height: 1.2 mm; Minimum Operating Temperature: -30 Cel; Rx Insertion Loss: 2 dB;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FI168P157519-T
DUPLEXER; Width (mm): 0.8; Mounting Type: SURFACE MOUNT; Tx Insertion Loss: .7 dB; Length: 1.6 mm; Receive Center Frequency: 2450.5 MHz;
FI168P245030-T
DUPLEXER; Rx Insertion Loss: .8 dB; Length: 1.6 mm; Mounting Type: SURFACE MOUNT; Receive Center Frequency: 5425 MHz; Additional Features: CENTER FREQ TX/RX: 1584/2450 MHZ;
FI168P245010-T
DUPLEXER; Mounting Type: SURFACE MOUNT; Additional Features: CENTER FREQ TX/RX: 2450 MHZ; Packing Method: TR, PAPER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved