Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's FAR-F6KA-1G5754-L4AJ-Z is a SAW filter with 5 terminals, operating from -30°C to 85°C. It is surface mountable in plastic packaging. Ideal for applications requiring precise signal filtering and temperature stability.
Median Price
$0.291
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.480
100+ parts
$0.313
1k+ parts
$0.253
10k+ parts
$0.222
Avnet
-
$0.214
Verical
Nova Conductors
$0.284
IBS Electronics
$0.401
$0.351
Vyrian
Electro Sonic
$0.233
Global Solutions Electronics Company
Ampacity Inc.
$0.159
Continental Prestige Electronics
$0.278
Argo Parts USA
$0.275
Perfect Parts
Assy Fe
Kepictronics
Authorized Procurement Solutions
Futuretech Components
Netroflash
$0.270
$0.264
Having 5 terminals allows for more flexibility in circuit design and connectivity options.
SAW filters provide high performance and accuracy in signal filtering, making this product ideal for precise applications.
With a high maximum operating temperature, this SAW filter is suitable for use in a wide range of environments without risk of damage.
The low minimum operating temperature ensures that this SAW filter can function reliably even in cold conditions.
Surface mount technology allows for easy and secure installation of the filter onto circuit boards, saving space and simplifying assembly.
The plastic package material offers durability and protection while keeping the overall weight of the product low.
SAW Filters FAR-F6KA-1G5754-L4AJ-Z attributes and parameters. Explore more SAW Filters devices from Taiyo Yuden
Filter Type:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Material:
Sub-Category:
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Ksl Microdevices
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Transys Electronics
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
1N4148WS
Eic Semiconductor
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
LM358ADR
Texas Instruments
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Promax-johnton
TFS170E
Microsemi
SAW FILTER; Minimum Operating Temperature: 10 Cel; Additional Features: TR, EMBOSSED, 13 INCH; Dimensions: L15.32XB6.5XH1.8 (mm)/L0.603XB0.256XH0.071 (inch); Height: 1.8 mm; Impedance (Input): 660 OHM//-11.6 pF;
B39901B3934H110
Rf360 Europe
SAW FILTER; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -45 Cel; Length: 3 mm; Center/Cutoff Frequency (fo/fc): 902.875 MHz; Maximum Operating Temperature: 105 Cel;
SF1575BA02505SLF
Renesas Electronics
SAW FILTER; Maximum Insertion Loss: 1.8 dB; Height: 1.5 mm; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Operating Temperature: 85 Cel;
AFS14A30-2185.00-T3
Abracon
Abracon's AFS14A30-2185.00-T3 SAW Filter has 5 terminals, operates b/w -30°C to 105°C, with a width of 1.1mm. It offers a max insertion loss of 3.5 dB at 2185 MHz and is ideal for applications requiring a surface mount filter with an impedance of 50 ohms.
B39162B3913U410
TDK
The TDK B39162B3913U410 is a SAW filter with 6 terminals, operating from -40°C to 85°C. It has a center frequency of 1588 MHz and max insertion loss of 3 dB. Ideal for applications requiring a compact surface mount filter with gold terminal finish and AEC-Q200 screening level.
SBU4816AD
Toshiba
SAW FILTER; Diameter (mm): 9.1; Output Impedance (ohm): 50 OHM; Height: 3.8 mm; Impedance (Input): 50 OHM; Minimum Operating Temperature: -20 Cel;
B39921B4301F210
The TDK B39921B4301F210 is a SAW filter with 5 terminals, operating from -40 to 85°C. It has a center frequency of 915 MHz and max insertion loss of 2.5 dB. Ideal for applications requiring a compact surface mount filter with impedance of 50 ohms in automotive electronics.
SF1880BA02524SLF
SAW FILTER; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM; Maximum Operating Temperature: 80 Cel; JESD-609 Code: e3; Height: 1.5 mm;
SF2133BA02661S
SAW FILTER; Height: 1 mm; Width (mm): 3.0; Length: 3 mm; Maximum Insertion Loss: 3.7 dB; No. of Terminals: 6;
SAFFB876MAA0F0AR1X
Murata Manufacturing
SAW FILTER; Length: 1.1 mm; Additional Features: TR, EMBOSSED, 7 INCH; Width (mm): 0.9; Dimensions: L1.1XB0.9XH0.5 (mm)/L0.043XB0.035XH0.02 (inch); Height: .5 mm;
SF1220BA02521S
SAW FILTER; Terminal Finish: Tin/Lead (Sn/Pb); Height: 1.3 mm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -85 Cel; Impedance (Input): 200 OHM;
B39222B5359U410
The TDK B39222B5359U410 SAW Filter operates b/w -40°C to 95°C with a max insertion loss of 3.8 dB at 2155 MHz. Measuring 3x3x1.1 mm, it has an impedance of 50 ohms and is ideal for surface mount applications in various electronic devices.
SF0600BA03183S
SAW FILTER; Length: 5 mm; Impedance (Input): 50 OHM; Height: 2.12 mm; Minimum Operating Temperature: 25 Cel; Output Impedance (ohm): 50 OHM;
TA2547A
Tai-saw Technology
TA2547A by Tai-saw Technology is a SAW FILTER with 5 terminals, operating b/w -30 to 85 °C. It has a width of 1.1mm, length of 1.4mm, and height of 0.6mm. With a max insertion loss of 3 dB at 725.5 MHz, it's ideal for applications requiring a surface mount filter with an impedance of 50 OHM.
SF0111BA02639S
SAW FILTER; Impedance (Input): 50 OHM; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Package Material: CERAMIC;
SF0154BA03191S
SAW FILTER; Height: 2 mm; Maximum Insertion Loss: 12 dB; Impedance (Input): 50 OHM; Maximum Operating Temperature: 85 Cel; No. of Functions: 1;
SF0480BA02643S
SAW FILTER; Center/Cutoff Frequency (fo/fc): 480 MHz; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
TB1347A
TB1347A by Tai-saw Technology is a SAW FILTER with 2 functions, 10 terminals, and 70 MHz center frequency. It operates b/w -40 to 80 °C and has a max insertion loss of 8.5 dB. Ideal for applications requiring surface mount filters with impedance of 50 OHM.
F072FSL
SAW-VIDEO/SOUND FILTER; Length: 16.3 mm; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -20 Cel; Mounting Type: THROUGH HOLE MOUNT; Output Impedance (ohm): 4.5 pF OHM;
SF0704BA03163S
SAW FILTER; Minimum Operating Temperature: -20 Cel; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 4.2 dB; Impedance (Input): 50 OHM; Center/Cutoff Frequency (fo/fc): 704 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAR-F6KA-1G5754-L4AJZ
Fujitsu
SAW FILTER; Maximum Operating Temperature: 85 Cel; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -30 Cel;
FAR-F5CE-915M00-D238-Y
SAW FILTER; Package Material: PLASTIC; JESD-609 Code: e0; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin/Lead (Sn/Pb); No. of Terminals: 6;
FAR-F6KA-1G5754-L4AJZA
SAW FILTER; Package Material: PLASTIC; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel; Mounting Type: SURFACE MOUNT;
FAR-F6KA-1G8800-L4AF-Z
Taiyo Yuden
SAW FILTER; Impedance (Input): 50 OHM; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Length: 1.4 mm; Height: .5 mm;
FAR-F6KA-1G7400-D4DE-Z
SAW FILTER; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Maximum Insertion Loss: 2.7 dB; Minimum Operating Temperature: -30 Cel; Length: 1.4 mm;
FAR-F6KA-1G8425-D4CK-Z
SAW FILTER; Height: .5 mm; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Width (mm): 1; JESD-609 Code: e3;
FAR-F6KA-1G5859-D4MS-Z
Taiyo Yuden's FAR-F6KA-1G5859-D4MS-Z is a SAW filter with 5 terminals, operating from -30 to 85°C. It offers low insertion loss of 1.8 dB at 1585.653 MHz and has an input impedance of 50Ω. Ideal for surface mount applications in RF circuits requiring precise frequency filtering.
FAR-F6KA-1G9500-D4DG-Z
SAW FILTER; No. of Terminals: 5; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel; Width (mm): 1; Height: .5 mm;
FAR-F6KA-1G5754-L4AJ-Y
SAW FILTER; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); No. of Terminals: 5; Maximum Operating Temperature: 85 Cel;
FAR-F6KA-1G5754-L4AA
SAW FILTER; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel; Impedance (Input): 50 OHM; Height: .5 mm; Length: 1.4 mm;
FAR-F6KA-1G8800-L4AF
SAW FILTER; Mounting Type: SURFACE MOUNT; Minimum Operating Temperature: -30 Cel; Maximum Insertion Loss: 3.8 dB; Dimensions: L1.4XB1.0XH0.5 (mm)/L0.055XB0.039XH0.02 (inch); Impedance (Input): 50 OHM;
FAR-F6KA-1G9500-D4DG
SAW FILTER; No. of Terminals: 5; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -30 Cel; Center/Cutoff Frequency (fo/fc): 1950 MHz; Impedance (Input): 50 OHM;
FAR-F6KA-1G7475-D4CY
SAW FILTER; Center/Cutoff Frequency (fo/fc): 3000 MHz; Package Material: PLASTIC; Width (mm): 1.0; No. of Terminals: 5; Height: .5 mm;
SAW FILTER; Dimensions: L1.4XB1.0XH0.5 (mm)/L0.055XB0.039XH0.02 (inch); No. of Functions: 1; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); No. of Terminals: 5;
FAR-F6KA-1G5754-L4AJ
SAW FILTER; Mounting Type: SURFACE MOUNT; Maximum Insertion Loss: 1.3 dB; Manufacturer Series: FAR-F6KA-1G5754-L4AJ; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved