Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TS78L09CSRLG by Taiwan Semiconductor is a fixed positive single output standard regulator with an output voltage of 9V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The surface-mount package style and small outline design further enhance its versatility in modern circuit designs.
Median Price
$0.790
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.316
1k+ parts
$0.197
10k+ parts
$0.133
Nova Conductors
$0.289
-
Bristol Electronics
$0.750
$0.278
$0.195
TME
$0.780
$0.297
$0.232
Vyrian
Schukat
$0.249
$0.172
$0.164
Argo Parts USA
$0.281
Netroflash
$0.284
Continental Prestige Electronics
Semicontronic
$0.365
$0.356
$0.354
Aztec Data Supply Inc.
$7.900
PLASTIC/EPOXY. This material is durable, lightweight, and cost-effective, making it a good choice for a wide range of applications.
YES. This feature allows for easy installation and space-saving on PCBs, making it ideal for compact designs.
125 °C. The high maximum operating temperature ensures reliability and performance in various environmental conditions.
RECTANGULAR. The rectangular shape provides a standard form factor that can easily fit into existing layouts and designs.
GULL WING. The gull wing terminals offer secure connections and ease of soldering during assembly.
0 °C. The low minimum operating temperature ensures the regulator can function in colder environments.
8.57 V. The minimum output voltage allows for precise regulation and control of the output signal.
4.8 %. The tight voltage tolerance ensures stable and accurate output voltage under varying conditions.
9 V. The nominal output voltage meets standard requirements and is suitable for a wide range of applications.
8. The multiple terminals offer flexibility in connection options and enable additional features to be implemented.
SMALL OUTLINE. The small outline package style is space-efficient and suitable for compact designs.
1.27 mm. The small terminal pitch allows for dense mounting and integration in crowded PCB layouts.
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR. This type of regulator provides stable and dependable voltage regulation for various electronic circuits.
DUAL. The dual terminal position offers redundancy and enhances the reliability of the connections.
9.45 V. The high maximum output voltage provides a margin above the nominal voltage for peak performance.
3. The MSL rating indicates the moisture resistance of the component, making it suitable for various environments.
2 mm. The low seated height allows for a compact and low-profile design, ideal for slim applications.
3.9 mm. The narrow width enables the regulator to fit in tight spaces and contributes to a compact overall footprint.
11.5 V. The high minimum input voltage ensures proper operation even under fluctuating input voltages.
0.1 A. The maximum output current capacity allows for powering a variety of loads within the specified range.
4.85 mm. The moderate length provides a balanced form factor and facilitates easy integration into different systems.
23 V. The high maximum input voltage range offers flexibility and protection against voltage spikes or surges.
Fixed Regulators - Positive Single Output Standard TS78L09CSRLG attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from Taiwan Semiconductor
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
TS78L09CSRLG Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Taiwan Semiconductor was established in 1979 and remains under the direction of its founder and CEO, Arthur Wang. The company has grown from its beginnings as a local manufacturer, to a global enterprise with 1,500 employees. Taiwan Semiconductor is publicly traded on the Stock Exchange Corporation of Taiwan. Recognized for more than 40 years for its core competence in discrete Power Rectifiers, Taiwan Semiconductor has expanded its product portfolio to include Trench Schottkys, MOSFETs, Power Transistors, LED Driver ICs, Analog ICs and ESD Protection Devices, and now provides a complete solution from one source.
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM7812
Continental Device India
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4.2 %; Surface Mount: NO; Operating Temperature (TJ-Max): 125 Cel;
UA78L12ACDRE4
The Texas Instruments UA78L12ACDRE4 is a fixed positive single output standard regulator with an output voltage of 12V and max current of 0.1A. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact designs. The device comes in a small outline package with surface mount capability, ideal for space-constrained PCB layouts.
AS7806ADTR-E1
AS7806ADTR-E1 by Diodes Inc. is a fixed positive single output standard regulator with an output voltage of 6V and max current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation in compact spaces. This surface-mount device features a small outline package style and matte tin terminal finish for easy integration into PCB designs.
LM7815CT
MC78L15ACP
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM340T-5.0
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel;
LM2930T-5.0/NOPB
LM2930T-5.0/NOPB by Texas Instruments is a fixed positive single output standard regulator with 5V nominal output voltage and 0.15A max output current. It operates b/w -40 to 85°C, suitable for applications requiring stable voltage supply in various electronic devices.
MC78M15ABDTRKG
MC78M15ABDTRKG by Onsemi is a fixed positive single output standard regulator with 15V nominal output voltage, 0.5A max output current, and 4% max voltage tolerance. It is ideal for applications requiring stable power supply in a compact form factor, such as consumer electronics and industrial automation systems.
UA78L05AILP
UA78L05AILP by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.1A. Ideal for applications requiring stable voltage regulation in electronic circuits.
BA17812T
ROHM
ROHM's BA17812T is a fixed positive single output standard regulator with 12V nominal output voltage and 1A max output current. It operates at temperatures up to 150°C, making it suitable for various applications requiring stable voltage regulation in harsh environments. The through-hole package style and flange mount design offer easy installation and secure connection in electronic circuits.
MC78L15ACDR2G
MC78L15ACDR2G by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
ZXTR2005Z-13
ZXTR2005Z-13 by Diodes Inc. is a fixed positive LDO regulator with 5V output voltage, 0.1A max current, and 10% voltage tolerance. It operates b/w -40 to 125°C, suitable for applications requiring stable low power supply in compact designs with SMD packaging.
LR645N3-G-P013
LR645N3-G-P013 by Microchip Tech is a fixed positive single output standard regulator with 10V nominal output voltage, 7% voltage tolerance, and 0.003A max output current. It operates in temperatures ranging from -40 to 125°C and is ideal for applications requiring stable voltage regulation in automotive electronics.
L78L33ACZ-AP
STMicroelectronics
L78L33ACZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 3.3V, max load regulation of 0.06%, and can handle a max output current of 0.07A. This regulator is commonly used in applications requiring stable voltage outputs within specified tolerances.
KA78L05AZ
Fairchild Semiconductor's KA78L05AZ is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in a through-hole package format.
R1524N050B-TR-KE
Nisshinbo Micro Devices
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: LSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 50 V; Maximum Voltage Tolerance: 1.6 %;
UA78L15ACDRE4
UA78L15ACDRE4 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The device features a small outline package style and surface-mount capability, ideal for space-constrained designs where reliable power delivery is essential.
MC78M12BTG
MC78M12BTG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage. It has a max output current of 0.5A and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
L78M12CDT-TR
L78M12CDT-TR by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 12V and max output current of 0.5A. It operates in an input voltage range of 14.5V to 30V, making it suitable for various applications requiring stable power supply solutions in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly processes.
LM78L15ACM/NOPB
LM78L15ACM/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 15V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TS78M05CP
Taiwan Semiconductor
TS78M05CP by Taiwan Semiconductor is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. The device features gull wing terminals and is surface mountable, ideal for space-constrained designs where reliable power delivery is essential.
TS78L05CXRFG
TS78L05CXRFG by Taiwan Semiconductor is a fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a min input voltage of 7.5V and a max output current of 0.1A. This regulator is commonly used in applications that require stable and regulated power supply, such as electronic devices and circuits.
TS78M05CPRO
TS78M05CPRO by Taiwan Semiconductor is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. The package style is small outline, surface mountable, and has a gull wing terminal form for easy installation.
TS78L05ACYRMG
TS78L05ACYRMG by Taiwan Semiconductor is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package.
TS78L05CSRLG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel;
TS78L05ACYRM
TS78L05ACYRM by Taiwan Semiconductor is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in design integration.
TS78L03ACYRMG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Voltage Tolerance: 4.8 %; Operating Temperature (TJ-Max): 125 Cel; JESD-30 Code: R-PSSO-F3;
TS7805CZC0G
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Time At Peak Reflow Temperature (s): 10;
TS78M12CPROG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.8 %; Operating Temperature (TJ-Max): 125 Cel;
TS78L03CSRL
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.8 %; Maximum Seated Height: 2 mm;
TS78L05CSRL
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Maximum Output Voltage-1: 5.25 V;
TS78L08CSRL
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.9 %; Maximum Input Voltage: 23 V;
TS78L09ACYRM
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Voltage Tolerance: 4.8 %; Package Body Material: PLASTIC/EPOXY; Operating Temperature (TJ-Max): 125 Cel;
TS78L09CSRL
TS78L09CXRF
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.8 %; Maximum Output Current-1: .1 A;
TS78L09CYRM
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Voltage Tolerance: 4.8 %; JESD-30 Code: R-PSSO-F3; Package Style (Meter): SMALL OUTLINE;
TS78L18CSRL
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.8 %; Nominal Output Voltage-1: 18 V;
TS78L03CSRLG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.8 %; Package Style (Meter): SMALL OUTLINE;
TS78L09ACYRMG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Voltage Tolerance: 4.8 %; Terminal Pitch: 1.5 mm; Maximum Seated Height: 1.6 mm;
TS78L09CXRFG
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 4.8 %; Terminal Position: DUAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved