Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TS971IYLT by STMicroelectronics is a high-performance op-amp featuring a max input offset voltage of 7mV, low bias current of 1µA, and an impressive common mode reject ratio of 85dB. Ideal for automotive applications, it operates within -40 °C to 125 °C. Its compact design ensures efficient surface mounting in various electronic circuits.
Median Price
$0.679
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.130
1k+ parts
$0.938
10k+ parts
$0.836
Avnet
Arrow
Verical
Digiode
$0.635
Vyrian
Anansix
Netsource Technology, Inc.
Corphita
$0.601
Vigor
$0.620
AZTECH Wire
$1.160
$1.110
$1.090
$1.070
IDEA Electronic Components Group
$5.147
$4.633
Microchip USA
$5.349
Component Stockers USA
$7.120
MKK Technologies
$9.679
DigiPath Technology Company
Perfect Parts
Parana Technologies
$6.154
Infinite Electronics LLP (Excess)
Kepictronics
The durable plastic/epoxy material ensures reliability and protection from environmental factors, making it suitable for various applications.
A low input offset voltage allows for accurate amplification of small signals, enhancing the precision of the final output.
This low bias current minimizes power consumption and improves the performance in battery-operated devices.
Surface mount compatibility allows for compact designs and automated assembly processes, saving space on PCBs.
The rectangular shape helps in efficient layout on circuit boards, optimizing space utilization.
A high common mode reject ratio (CMRR) helps eliminate noise from power supply variations, ensuring clearer and more accurate signals.
With a low nominal supply voltage, this Op Amp is ideal for low-power applications, enhancing energy efficiency.
Dual supply voltage allows for greater flexibility in signal processing applications, enabling more versatile circuit designs.
Five terminals provide ample connectivity options while keeping the design compact.
A low input offset current ensures minimal distortion, enhancing the accuracy of analog signal processing.
The small outline and low-profile design make this Op Amp perfect for space-sensitive applications.
A reasonable slew rate allows for decent response time in dynamic signal applications, maintaining signal integrity.
This allows for versatility in designing circuits powered by higher voltage supplies while maintaining safety margins.
Operation at high temperatures makes this Op Amp suitable for automotive and industrial applications where conditions can be extreme.
Low bias current at room temperature contributes to enhanced performance in precision applications.
High voltage gain capabilities enable the amplification of low-level signals, making it ideal for sensitive applications.
Low temperature operation ensures reliability in harsh environments, such as automotive applications.
This finish provides excellent conductivity and corrosion resistance, enhancing product longevity.
Dual terminal positions facilitate easy mounting and integration into various circuit designs.
A low profile means better compatibility with compact designs, especially in modern electronic devices.
Narrow width helps optimize use of PCB space, crucial for high-density applications.
Tolerance to extended peak reflow times ensures reliability in soldering processes.
A high peak reflow temperature reinforces the Op Amp’s suitability for standard soldering processes in manufacturing.
Compact length allows for efficient use in space-constrained electronic devices.
Automotive-grade components ensure compliance with stringent automotive applications, enhancing reliability and durability.
Allows for versatility in dual-supply applications, handling both positive and negative voltage swings effectively.
A high unity gain bandwidth supports a wide range of frequencies, perfect for high-speed signal processing applications.
Even the minimum CMRR provides effective noise suppression, making this Op Amp a reliable choice in various environments.
BICMOS technology combines the benefits of bipolar and CMOS, delivering high-speed operation with low power consumption.
Gull wing terminals facilitate easy soldering and provide good mechanical stability in assemblies.
This Op Amp type is versatile and widely used in applications like Filtering, Signal Conditioning, and more.
The low supply current enhances battery life in portable devices and minimizes heat generation during operation.
This nominal negative supply voltage allows for balanced circuit designs, especially in differential signaling applications.
Voltage-feedback architecture provides stability and high bandwidth, essential for high-performance analog processing.
Tape and reel packing streamlines the manufacturing process, making it easier to handle during assembly.
This slow rate ensures stability in the Op Amp's response to changing signals, which is beneficial in precise applications.
A terminal pitch of 0.95 mm is suitable for modern PCB designs, allowing for greater spacing and routing flexibility.
Operational Amplifiers (Op Amps) TS971IYLT attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from STMicroelectronics
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Minimum Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Minimum Slew Rate:
Nominal Slew Rate:
Maximum Input Offset Current (IIO):
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
TS971IYLT Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Assembly/Origin - New Lead-Frame 01/Sep/2020
PCN Packaging - Moisture Barrier Bag 09/May/2016 Box Label Chg 28/Jul/2016
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Dc Components
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
1552200253
Molex
WIRE AND CABLE;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
AD8495ARMZ
Analog Devices
AD8495ARMZ by Analog Devices is an operational amplifier with a max supply voltage of 18V and bias current of 0.05uA. It is suitable for automotive applications, featuring a small outline package and operating temperature range from -40 to 125°C. The op amp has dual terminals, matte tin finish, and a compact square shape for surface mount assembly.
LM741CN
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO;
LM2902D-T
NXP Semiconductors' LM2902D-T is a quad operational amplifier with 14 terminals, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. With a package style of small outline, it is ideal for automotive applications requiring high min voltage gain and low bias current.
LM7321MF
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
OPA544TG3
OPA544TG3 by Texas Instruments is an operational amplifier with a max input offset voltage of 5000 uV, 106 dB common mode reject ratio, and 35 V supply voltage. Ideal for industrial applications requiring low-bias current amplification in a compact package style with through-hole terminals.
JM38510/13501BGA
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
OPA364IDBVT
OPA364IDBVT by Texas Instruments is a low-offset, micropower operational amplifier with 500uV max input offset voltage. Ideal for automotive applications, it operates at -40 to 125 °C and offers 90dB CMRR. With VFB architecture and 7000kHz unity gain bandwidth, it's a compact solution in PLASTIC/EPOXY package for precision signal processing.
TL082CP
Motorola
LM324N
Sgs-ates Componenti Electronici S P A
OPERATIONAL AMPLIFIER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
AD8479ARZ-RL
AD8479ARZ-RL by Analog Devices is an Operational Amplifier with a peak reflow temperature of 260°C for 30s. It features matte tin terminal finish, TR packing method, and MSL of 3. Ideal for precision signal conditioning in industrial automation and instrumentation applications.
LM358NG
LM358NG by Onsemi is an operational amplifier with 2 functions, offering a max input offset voltage of 7000 uV and a nominal voltage of 5 V. Widely used in commercial applications, it features a min voltage gain of 15000 and operates within a temperature range of 0-70 °C.
OP07CP
OPA2365AIDRG4
OPA2365AIDRG4 by Texas Instruments is a CMOS Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 200uV, nominal voltage of 5V, and unity gain bandwidth of 50MHz. Ideal for automotive applications due to its temperature grade and small outline package style.
OPA2350EA/250G4
OPA2350EA/250G4 by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It has a max input offset voltage of 500 uV, nominal unity gain bandwidth of 38 MHz, and operates at an industrial temperature grade. Ideal for precision applications requiring high voltage feedback amplification in compact designs.
ADA4084-2ARMZ
ADA4084-2ARMZ by Analog Devices is a dual operational amplifier with low offset voltage of 250 uV and max bias current of 0.45 uA. It operates at a supply voltage of +-5 V, making it suitable for automotive applications. With a unity gain bandwidth of 15900 kHz, this op amp offers high performance in a compact package.
OPA454AIDDAG4
Texas Instruments OPA454AIDDAG4 is an Operational Amplifier with 4000uV Max Input Offset Voltage, 146dB CMRR, and 2500kHz Unity Gain Bandwidth. Ideal for military applications due to its MIL-TEMP rating and low bias current of 0.0001uA. Suitable for compact designs with small outline package style and surface mount capability.
LM107H
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
OPA2131UA
OPA2131UA by Texas Instruments is an Operational Amplifier with low input offset voltage of 1000 uV, high common mode rejection ratio of 80 dB, and wide supply voltage range of +-15 V. Ideal for precision signal conditioning in military-grade applications due to its low bias current and high bandwidth capabilities.
INA133UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
INA139NA/250G4
INA139NA/250G4 by Texas Instruments is an instrumentation amplifier with 1000uV max input offset voltage, 0.1% max nonlinearity, and 100dB min CMRR. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85°C with a bandwidth of 0.44MHz and max supply voltage of 60V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT6205IS5#TRPBF
TS971ILT
STMicroelectronics
TS971ILT by STMicroelectronics is an operational amplifier with a max input offset voltage of 7000uV, ideal for automotive applications. With a nominal voltage of 2.5V and max slew rate of 2.8V/us, it offers precise signal amplification in compact designs. This op amp features a low profile package style and surface mount capability for versatile integration in electronic systems.
TS971ID
TS971ID by STMicroelectronics is an operational amplifier (Op Amp) with a max input offset voltage of 7000 uV. It has a nominal common mode reject ratio of 85 dB and a min slew rate of 2.8 V/us. This Op Amp is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TS974IDT
TS974IDT by STMicroelectronics is a voltage-feedback operational amplifier with 4 functions. It has a max input offset voltage of 7000 uV and a nominal common mode reject ratio of 85 dB. This amplifier is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
TS974IN
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
TS972IPT
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
TS972IS
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
TS972IST
TS971D
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TS971IDT
STMicroelectronics' TS971IDT is an Operational Amplifier with 7000uV Max Input Offset Voltage, 1uA Max Average Bias Current, and 85dB Nominal CMRR. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and VOLTAGE-FEEDBACK architecture.
TS972D
TS972IP
TS971IYDT
TS972IQT
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSSON; Package Shape: SQUARE;
TS972DT
TS972ID
TS972IDT
TS971LT
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
TS971CD
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TS971DT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved