Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LD2985AM50R from STMicroelectronics is a fixed positive LDO regulator with a nominal output of 5V and a max dropout voltage of 0.575V. It operates in -40 °C to 125°C, making it ideal for various applications. Its compact design features a low-profile package with gull-wing terminals.
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
ComSIT Distribution GmbH
ComSIT USA
Digiode
Anansix
Microchip USA
$4.148
IDEA Electronic Components Group
$5.147
$4.633
MKK Technologies
$9.679
DigiPath Technology Company
AZTECH Wire
$11.000
A-Z Elektronik GmbH
Vigor
Authorized Procurement Solutions
Corphita
Kepictronics
S.R.D Solutions
Alle Elektronik GmbH
Parana Technologies
$6.154
The durable plastic/epoxy material ensures reliability and protection against environmental factors.
A low dropout voltage allows for efficient regulation, making it ideal for battery-operated devices.
Surface mount compatibility allows for efficient use of board space and simpler assembly.
The high maximum operating temperature enhances reliability in demanding applications.
Bipolar technology is known for low noise and steady performance, making it suitable for analog applications.
The rectangular shape aids in efficient PCB layout and component placement.
Gull wing terminals facilitate easy soldering and better thermal performance.
The ability to operate at -40 °C ensures functionality in extreme environments.
This provides flexibility in applications requiring specific voltage outputs.
The tight voltage tolerance ensures precision in critical applications, minimizing power management issues.
With a common voltage output of 5 V, it is highly compatible with a wide range of devices.
Five terminals allow for versatile connection options, enhancing integration possibilities.
The compact package style is perfect for space-constrained applications.
A fixed output simplifies design and implementation, reducing troubleshooting time during integration.
The narrow terminal pitch allows for compact designs while ensuring reliability of connections.
Excellent line regulation minimizes output voltage variations, ensuring stable performance.
This type is ideal for providing a stable, fixed output in various electronic devices.
Tin plating offers good solderability and corrosion resistance, enhancing longevity.
Dual terminal positioning improves layout flexibility, contributing to better thermal dissipation.
The slightly higher output voltage allows for more design flexibility in various applications.
The low seated height contributes to low-profile designs, ideal for compact devices.
A narrow width accommodates tighter PCB designs without sacrificing performance.
This low minimum input voltage expands application suitability, allowing operation in battery-powered devices.
The ability to deliver 150 mA makes it suitable for low to moderate current applications.
This very low dropout voltage enhances efficiency and extends battery life in portable devices.
The short length makes it easier to fit into compact designs without compromising performance.
Supports higher input voltages, making it suitable for a wide range of applications.
This absolute maximum input voltage rating enables safe operation for varying power supply conditions.
Fixed Regulators - Positive Single Output LDO LD2985AM50R attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from STMicroelectronics
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
LD2985AM50R Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
Nte Electronics
BAV99
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LT1121IST-5#TRPBF
Analog Devices
Analog Devices' LT1121IST-5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.7V. With a max output current of 0.15A, it is ideal for applications requiring stable voltage regulation in compact spaces due to its small outline package style and low seated height of 1.8mm.
LM1117DTX-1.8/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LM2931T-5.0G
Onsemi
LM2931T-5.0G by Onsemi is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.1A max output current, and 6V min input voltage. It has a max dropout voltage of 0.6V and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in electronic circuits.
LM4132BMF-2.5/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: .1 %; Operating Temperature (TJ-Min): -40 Cel;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LM1117T-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %; Terminal Finish: Matte Tin (Sn);
LP2992AILD-5.0/NOPB
Texas Instruments
LP2992AILD-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style includes small outline, heat sink/slug, very thin profile, and shrink pitch features for efficient mounting on PCBs.
ADM7172ACPZ-2.5-R7
ADM7172ACPZ-2.5-R7 by Analog Devices is a Fixed Positive Single Output LDO Regulator with 2A max output current, 2.5V nominal output voltage, and 1.5% max voltage tolerance. Ideal for applications requiring stable power supply in compact spaces due to its very thin profile chip carrier package style.
TPS76350DBVR
TPS76350DBVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
MIC5365-3.3YC5-TR
Microchip Technology
MIC5365-3.3YC5-TR by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.15 A and a dropout voltage of 0.31 V. It is commonly used in applications requiring stable voltage regulation, such as power management in electronic devices.
NCP1117DT15RKG
NCP1117DT15RKG by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a nominal output voltage of 1.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM2931Z-5.0
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: WIRE; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 10 %;
NCP508SQ33T1G
NCP508SQ33T1G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.04A. It has a small outline package style, making it suitable for surface mount applications where precise voltage regulation is required within an operating temperature range of -40 to 125°C. The regulator offers low dropout voltage at 0.3V and excellent line/load regulation for reliable performance in various electronic devices.
MIC5205-3.3YM5T&R
Micrel
MIC5205-3.3YM5T&R by Micrel is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It features a small outline, low profile package style suitable for surface mount applications, with an operating temperature range from -40 to 125°C making it ideal for various electronic devices requiring stable voltage regulation.
LP2992AILD-3.3/NOPB
LP2992AILD-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM2940CT-15/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 5 %; Package Style (Meter): FLANGE MOUNT;
TLV70018DDCR
TLV70018DDCR by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 1.8V and max current of 0.2A. Operating temperature ranges from -40°C to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation in a compact package.
LT1086CM-3.3#TRPBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LM3480IM3X-3.3/NOPB
LM3480IM3X-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1.2V max dropout voltage, and 0.1A max output current. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
LM1085IT-12/NOPB
LM1085IT-12/NOPB by Texas Instruments is a 12V fixed positive single output LDO regulator with a max output current of 3A. It features a max dropout voltage of 1.5V and operates within a temperature range of -40 to 125°C. Ideal for applications requiring stable voltage regulation in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1761MPS5-5#TRPBF
LD29150DT33R
STMicroelectronics
LD29150DT33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 3.3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LD2985BM50R
STMicroelectronics LD2985BM50R is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.15A. It operates in an input voltage range from 2.5V to 16V, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
LD29150DT50R
STMicroelectronics LD29150DT50R is a fixed positive single output LDO regulator with a max output current of 1.5A and a nominal output voltage of 5V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LD2980ABM33TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.5 %;
LD2985BM33R
STMicroelectronics LD2985BM33R is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring low dropout voltage and precise voltage regulation.
LD2981ABU33TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: LSOF; Terminal Form: FLAT; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 2.5 %;
LD2980CM50TR
LD2980CM50TR by STMicroelectronics is a fixed positive single output LDO regulator with a max dropout voltage of 0.225V and an operating temperature range of -40°C to 125°C. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LD2980CM33TR
STMicroelectronics LD2980CM33TR is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.05A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LD29150PT50R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LD2980ABM50TR
LD2981CM33TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LD29080DT33R
STMicroelectronics' LD29080DT33R is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.8A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs with limited space constraints.
LD2979M30TR
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 4 %;
LD2981ABM50TR
STMicroelectronics LD2981ABM50TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature ranges from -40 to 125°C making it ideal for various electronic devices.
LD2981ABU50TR
STMicroelectronics LD2981ABU50TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.1A max output current. It has a small outline, low profile package style suitable for surface mount applications. Operating temperature range from -40°C to 125°C makes it ideal for various electronic devices.
LD2985BM30R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LD29150DT18R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2 %;
LD2981ABM33TR
LD29080PT15R
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: TO-252; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Maximum Output Voltage-1: 1.537 V;
LD29080PT18
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.5 %; Terminal Pitch: 1.27 mm; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved