Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L7915CP by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1.5A. Operating in temperatures from 0 to 125°C, it has a dropout voltage of 1.1V making it suitable for various applications requiring stable power supplies.
Median Price
$1.120
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Arrow
1+ parts
$0.386
100+ parts
$0.339
1k+ parts
$0.320
10k+ parts
$0.316
Chip1Stop
$0.644
$0.522
-
Newark
$1.360
$0.788
$0.602
$0.446
Mouser Electronics
$1.460
$0.846
$0.727
$0.690
DigiKey
$2.000
$1.198
$1.053
$0.995
Verical
$0.341
$0.322
$0.318
Avnet
EBV Elektronik
RS (Exports)
$0.655
$0.479
$0.467
Vyrian
$0.635
Digiode
$0.879
TME
$1.210
$0.608
$0.471
$0.392
Bristol Electronics
$1.351
$0.540
IBS Electronics
$0.708
$0.414
Cyclops Electronics Ltd
Chip Stock
Anansix
Martec Srl
Extreme Components
Partservice
$0.969
$0.421
Micros sp.j. W. Kędra i J. Lic
$1.038
$0.451
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Nova Conductors
LittleDiode
Donberg Electronics Ltd
Ampacity Inc.
Semicontronic
$0.526
$0.524
Corohmni
Corphita
$0.832
Vigor
$0.930
Continental Prestige Electronics
$1.040
$0.790
$0.530
$0.499
IDEA Electronic Components Group
$6.192
$5.572
MKK Technologies
$11.643
DigiPath Technology Company
Metaverse IC Inc.
GreenTree Electronics
Kepictronics
Perfect Parts
Authorized Procurement Solutions
Lixinc
Eastek
QUARKTWIN TECHNOLOGY LTD
Parana Technologies
$7.403
Aranea Global
Cyclops Electronics Ltd (Excess)
Computer Components Inc. - USA
Allows for operation in high temperature environments, ensuring reliability and durability.
Bipolar technology offers stable and accurate voltage regulation.
Compact rectangular package design for easy integration into various electronic devices.
Through-hole terminals provide secure and reliable connections.
Provides a stable minimum output voltage for powering sensitive components.
Stable and accurate nominal output voltage for consistent performance.
Capable of delivering high output current for powering a variety of components.
Provides a slightly higher output voltage for compatibility with different devices.
Fixed Regulators - Negative Single Output Standard L7915CP attributes and parameters. Explore more Fixed Regulators - Negative Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
L7915CP Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Back Metal Conversion 21/Jun/2016 Mult Devices 24/Oct/2017
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
Bkc Semiconductors
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MC7915ACD2TR4
MC7915ACD2TR4 by Onsemi is a fixed negative single output standard regulator with 15V nominal output voltage and 1A max output current. It operates b/w 0-125 °C, suitable for applications requiring a stable -15V power supply in compact designs. The surface-mount package with Gull Wing terminals makes it ideal for space-constrained PCB layouts.
L79L08CZ-TR
STMicroelectronics
L79L08CZ-TR by STMicroelectronics is a fixed negative regulator with a nominal output of 8V and a max current of 0.1A, ideal for stable voltage applications. It operates b/w 0 °C to 125 °C, ensuring reliability in various environments. With excellent line regulation at 0.2% and load regulation at 0.08%, it’s perfect for sensitive electronic circuits.
MC79L05ACDE4
MC79L05ACDE4 by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. Operating temperature ranges from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. The package style is small outline with gull wing terminals, ideal for surface mount assembly in space-constrained environments.
MC79L12ACDR2
MC79L12ACDR2 by Onsemi is a fixed negative single output standard regulator with 12V nominal output voltage. It has a max output current of 0.1A and operates in an input voltage range of 14.5V to 27V, making it suitable for various electronic applications requiring stable power supply.
MC7912BTG
MC7912BTG by Onsemi is a fixed negative single output standard regulator with an output voltage of 12V and max current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable power supply in harsh environments. The package style is flange mount with through-hole terminals, offering reliability and ease of installation in electronic circuits.
MC79L12ACLPM
MC79L12ACLPM by Texas Instruments is a fixed negative single output standard regulator with 12V nominal output voltage. It has a max load regulation of 0.1% and can handle up to 0.1A output current. Ideal for applications requiring stable power supply in temperature range of 0-125°C.
LM79L05ACTLX/NOPB
LM79L05ACTLX/NOPB by Texas Instruments is a fixed negative single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supplies in compact spaces. The package style is grid array with very thin profile and fine pitch, ideal for surface mount designs.
UA79U12Y
UA79U12Y by Texas Instruments is a fixed negative single output standard regulator with a nominal output voltage of 12V. It operates with a min input voltage of 14.5V and max input voltage of 30V, making it suitable for various applications requiring stable power supply in surface mount technology.
M38510/11501BXX
M38510/11501BXX by Texas Instruments is a fixed negative single output standard regulator with a package body made of metal. It operates in temperatures ranging from -55°C to 150°C and has an input voltage range of 7V to 25V. This bipolar technology device has a nominal output voltage of 5V, making it suitable for military applications requiring stable power supply.
5962-88746015X
Infineon Technologies
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: QCCN; Terminal Form: NO LEAD; Maximum Voltage Tolerance: 3 %; Package Style (Meter): CHIP CARRIER;
LM7905CT
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 25 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel;
TA79L024P
Toshiba
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
MC79L05ACLPME3
MC79L05ACLPME3 by Texas Instruments is a fixed negative single output standard regulator with 5V nominal output voltage. It has a max load regulation of 0.06% and can handle up to 0.1A output current. Ideal for applications requiring stable power supply in temperature-sensitive environments.
TA79L15F(TE12L,F)
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Adjustability: FIXED;
MC79M05BDTG
MC79M05BDTG by Onsemi is a fixed negative single output standard regulator with 5V nominal output voltage, 0.5A max output current, and -40 to 125°C operating temperature range. It is ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and surface mount capability.
MC79M12CDTRK
MC79M12CDTRK by Onsemi is a fixed negative single output standard regulator with an output voltage of 12V and max current of 0.5A. It operates in temperatures ranging from 0 to 125 °C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
MC79L12ABPRM
MC79L12ABPRM by Onsemi is a fixed negative single output standard regulator with a nominal output voltage of 12V and max voltage tolerance of 5%. Operating temperature ranges from -40 to 125 °C, making it suitable for applications requiring stable power supply in various environments. Its through-hole terminal form and cylindrical package style offer ease of integration in electronic circuits.
LM7905
Continental Device India
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SFM; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 4 %;
L79L09ACD13TR
L79L09ACD13TR from STMicroelectronics is a fixed negative regulator with a nominal output of 9V and max current of 0.1A. It operates b/w 0 °C to 125 °C, ensuring reliable performance in various applications. Its compact design features an 8-terminal gull-wing package for easy surface mounting.
LM79L15ACMWA
LM79L15ACMWA by Texas Instruments is a fixed negative single output standard regulator with an operating temperature of 125°C. It offers a nominal output voltage of 15V, max output current of 0.1A, and surface mount capability. Ideal for applications requiring stable voltage regulation in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L7915CV
L7915CV by STMicroelectronics is a fixed negative single output standard regulator with an output voltage of 15V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable power supply in industrial settings. Its through-hole package style and matte tin terminal finish enhance durability and ease of installation.
L7912CV
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7915CV-DG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4.67 %; Terminal Pitch: 2.54 mm;
L7912CV-DG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
L7915ACV
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
L7915CT
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-3; Terminal Form: PIN/PEG; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7915ACV-DG
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; Peak Reflow Temperature (C): NOT SPECIFIED; Packing Method: TUBE; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
L7912CD2T-TR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
L7915AB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Terminal Position: SINGLE; No. of Functions: 1; Qualification Status: Not Qualified;
L7912CD2T
L7915ACD2T
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %;
L7915
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Terminal Form: PIN/PEG; Package Style (Meter): FLANGE MOUNT; Terminal Position: BOTTOM; Package Body Material: METAL;
L7912ACVTR
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 4.2 %; Operating Temperature (TJ-Min): 0 Cel; Package Shape: RECTANGULAR;
L7915AC
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Technology: BIPOLAR; Package Body Material: PLASTIC/EPOXY; Qualification Status: Not Qualified;
L7912ACD2T
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 2; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4.17 %;
L7915ACD2T-TR
L7912AB
FIXED NEGATIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Qualification Status: Not Qualified; Package Body Material: PLASTIC/EPOXY;
L7912ACD2T-TR
L7912CP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved