Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
L78L33CD-TR by STMicroelectronics is a fixed positive single output standard regulator with 3.3V nominal output voltage, 0.07A max output current, and 10% max voltage tolerance. It is used in applications requiring stable power supply such as consumer electronics, industrial automation, and automotive systems.
Median Price
$0.131
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Newark
1+ parts
$0.124
100+ parts
-
1k+ parts
10k+ parts
$0.122
Mouser Electronics
$0.280
$0.143
$0.120
$0.102
DigiKey
$0.290
$0.149
Rochester
$0.109
$0.097
Avnet
Arrow
$0.077
Verical
EBV Elektronik
RS (Exports)
$0.214
$0.203
Farnell
$0.088
$0.072
Element14
$0.165
Chip1Stop
Greenchips
$0.090
$0.086
$0.082
$0.074
Digiode
$0.108
Nova Conductors
$0.156
Magnum Semiconductors LLP
Vyrian
Chip Stock
Bristol Electronics
IBS Electronics
SIE Connect GmbH - GreenChips
Anansix
Semicontronic
$0.060
$0.058
Ampacity Inc.
Corphita
$0.103
Argo Parts USA
$0.152
Netroflash
$0.153
Modulus Dynamics
$0.167
$0.160
Corohmni
$0.207
Advanced Electronics
$0.213
Vigor
$0.510
IDEA Electronic Components Group
$2.356
$2.121
Aztec Data Supply Inc.
$3.810
MKK Technologies
$4.431
DigiPath Technology Company
Infinite Electronics LLP (Excess)
Perfect Parts
Eastek
$0.080
Lixinc
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$4.444
A-Z Elektronik GmbH
Glotronic Ltd.
Kepictronics
Parana Technologies
$2.817
Continental Prestige Electronics
$0.217
$0.137
This material provides good durability and thermal resistance, making the product reliable for long-term use.
Easy to install and suitable for automated assembly processes, saving time and effort during production.
Can operate effectively in high-temperature environments, ensuring stable performance in various conditions.
Bipolar technology offers good stability and accuracy in voltage regulation, making the product reliable for demanding applications.
Provides a stable output voltage, suitable for powering sensitive electronic components consistently.
Offers precise load regulation, ensuring the output voltage remains constant regardless of varying load conditions.
Capable of supplying a moderate current, ideal for low-power applications where efficiency is important.
Fixed output voltage eliminates the need for adjustment, simplifying system design and ensuring consistent performance.
Fixed Regulators - Positive Single Output Standard L78L33CD-TR attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from STMicroelectronics
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
L78L33CD-TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - L78L 04/Nov/2016
PCN Assembly/Origin - L78LXX, LM317LXX and LM217LXX 17/Oct/2016
PCN Packaging - Cover Tape 07/Sep/2019 Mult Dev Inner Pkg Chg 30/Oct/2019
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Won-top Electronics
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Daco Semiconductor
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
STM32H753ZIT6
STM32H753ZIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20-Ch 16-Bit ADC and 2-Ch 12-Bit DAC channels. With a clock frequency of up to 48 MHz, it is ideal for industrial applications requiring CAN, Ethernet, and USB connectivity. This microcontroller operates b/w -40°C to +85°C temperature range.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
MC78L18ACPRAG
MC78L18ACPRAG by Onsemi is a fixed positive single output standard regulator with 18V nominal output voltage. It offers a max load regulation of 0.17% and can handle an output current of 0.1A. Ideal for applications requiring stable voltage supply in a temperature range from 0 to 125°C, such as industrial control systems or automotive electronics.
MC78L05ACDR2
MC78L05ACDR2 by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It has a small outline package style, Gull Wing terminal form, and operates b/w 0-125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
UA78L08ACDRG4
UA78L08ACDRG4 by Texas Instruments is a fixed positive single output standard regulator with an 8V nominal output voltage and 0.1A max output current. It operates within a temperature range of 0-125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly in space-constrained designs.
MC7815ACTG
MC7815ACTG by Onsemi is a BIPOLAR fixed positive single output standard regulator with 15V nominal output voltage. It operates in temperatures ranging from 0 to 125°C, suitable for applications requiring stable voltage supply up to 1A current. The through-hole package style and matte tin terminal finish make it ideal for flange mount installations.
MC7815CD2TG
MC7815CD2TG by Onsemi is a fixed positive single output standard regulator with an output voltage of 15V and a max output current of 1A. It is commonly used in applications that require regulated power supply, such as electronic devices and industrial equipment.
S-1335C2J-A4T2U3
Seiko Instruments Usa
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: HVSSOF; Terminal Form: FLAT; Maximum Input Voltage: 5.5 V; Length: 1 mm;
LP2950CZ-5.0/LFT1
LP2950CZ-5.0/LFT1 by Texas Instruments is a fixed positive single output standard regulator with 5V nominal output voltage and 0.1A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in a compact cylindrical package.
DI78L15ZAB
Diotec Semiconductor Ag
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; Moisture Sensitivity Level (MSL): 3;
MC78L12ACPG
MC78L12ACPG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage. It has a max load regulation of 0.1% and can handle up to 0.1A output current. Ideal for applications requiring stable voltage supply in the range of 14.5V to 27V, such as power management circuits in electronic devices.
LD39130SJ18R
LD39130SJ18R by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 1.8V and max current of 0.3A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact electronic devices. The package style is grid array with very thin profile and fine pitch, ideal for space-constrained designs.
LM340MP-5.0
LM340MP-5.0 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. Operating temperature ranges from -55°C to 125°C, making it suitable for various applications in electronics requiring stable power supply within a compact design.
DI78L3.3DAB
DI78L3.3DAB by Diotec Semiconductor Ag is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in compact spaces.
R1524N050B-TR-KE
New Japan Radio
R1524N050B-TR-KE by New Japan Radio is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 0.2A. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
MC78L18ACPRP
MC78L18ACPRP by Onsemi is a fixed positive single output standard regulator with 18V nominal output voltage. It has a max load regulation of 0.17% and can handle up to 0.1A output current. Ideal for applications requiring stable voltage supply in a compact through-hole package.
MC7824BD2TG
MC7824BD2TG by Onsemi is a fixed positive single output standard regulator with 24V nominal output voltage and 1A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is small outline with a heat sink, and it has a max input voltage of 38V.
MC7805CT
Vishay Semiconductors
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Output Voltage-1: 4.85 V; Qualification Status: Not Qualified;
MC7809CD2TR4G
MC7809CD2TR4G by Onsemi is a fixed positive single output standard regulator with an output voltage of 9V and a max output current of 1A. It is commonly used in applications that require stable power supply, such as electronic devices and industrial equipment.
LM340MP-5.0/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM78L05ACZ/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
AS7805ADTR-G1
Diodes Incorporated
AS7805ADTR-G1 by Diodes Inc. is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
L78L05ACD13TR
L78L05ACD13TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.07A. It operates within a temperature range of 0-125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
L78L05ACZ-AP
L78L05ACZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of 0 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
L78L05ABUTR
STMicroelectronics L78L05ABUTR is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.07A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. Its small outline package and surface mount capability enhance versatility in electronic designs.
L78L05ABD13TR
L78L05ABD13TR by STMicroelectronics is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V and can handle a max output current of 0.07A. This regulator is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
L78L05ACUTR
L78L05ACUTR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.07A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package. The device is surface mountable and features a small outline package style, ideal for space-constrained designs.
L78L05ACD
L78L05ACD by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package.
L78L33ACUTR
L78L33ACUTR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.07A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline (SO) with surface mount technology, ideal for space-constrained designs that demand reliable power management solutions.
L78L33ABUTR
STMicroelectronics L78L33ABUTR is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.07A. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
L78L12ACUTR
L78L12ACUTR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 12V and max current of 0.07A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space is limited.
L78L05ACZ
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 5 %;
L78L05CZ
STMicroelectronics' L78L05CZ is a BIPOLAR fixed positive single output standard regulator with 5V nominal output voltage and 0.07A max output current. It operates b/w 0-125°C, suitable for applications requiring stable voltage regulation in a through-hole package.
L78L05ACZTR
L78L05ACZTR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max load regulation of 0.06%. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in through-hole mounting configurations.
L78L33ABD-TR
L78L33ABD-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 3.3V and max output current of 0.07A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
L78L33ACD13TR
STMicroelectronics L78L33ACD13TR is a fixed positive single output standard regulator with an output voltage of 3.3V and max current of 0.07A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
L78L05CD13TR
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 10 %;
L78L12ABD-TR
L78L12ABD-TR by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 12V and max current of 0.07A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs.
L78L05ABD
STMicroelectronics L78L05ABD is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package.
L78L33ABD
STMicroelectronics L78L33ABD is a fixed positive single output standard regulator with 3.3V nominal output voltage and 0.1A max output current. Operating temperature range from -40 to 125°C makes it suitable for various applications in electronics requiring stable voltage regulation. With small outline package style and surface mount capability, it offers flexibility in design while ensuring efficient performance.
L78L05ABZ
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved