Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING CONTROLLER;
Median Price
$1.292
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Avnet
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Arrow
$1.343
Verical
$1.241
Chip1Stop
$1.210
RS (Exports)
$1.442
Vyrian
Digiode
Anansix
Microchip USA
$10.254
IDEA Electronic Components Group
$16.485
$14.837
MKK Technologies
$31.000
DigiPath Technology Company
Corphita
Parana Technologies
$19.711
Switching Regulators & Controllers L4986BTR attributes and parameters. Explore more Switching Regulators & Controllers devices from STMicroelectronics
Other IC type:
L4986BTR Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
KYOCERA AVX
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
SPC TECHNOLOGY/ MULTICOMP
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Bytesonic Electronics
LM2674M-ADJ
Texas Instruments
LM2674M-ADJ by Texas Instruments is a switching regulator with a max output current of 1.25 A and a max input voltage of 40 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
AP63200WU-7
Diodes Incorporated
SWITCHING REGULATOR; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
LM2674M-12/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
EN5322QI
Altera
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LM5122MHE/NOPB
LM5122MHE/NOPB by Texas Instruments is a switching controller with a current-mode control technique. It operates in a wide temperature range from -40 to 125°C and supports input voltages ranging from 3V to 65V. With a max output voltage of 100V and a compact package style, it is ideal for automotive applications requiring high efficiency and precise voltage regulation.
LMZM23601SILR
LMZM23601SILR by Texas Instruments is a switching regulator with 1A output current, 1100kHz max switching frequency, and -40 to 125°C operating temp. Ideal for automotive applications due to its buck-boost configuration, it supports input voltages from 4V to 36V and offers precise current-mode control.
LM3488MMX/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM2594M-5.0
LM2594M-5.0 by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a control technique of pulse width modulation and a buck switcher configuration, making it ideal for various power supply designs in compact spaces.
TPS62410DRCR
TPS62410DRCR by Texas Instruments is a dual switching controller with a max output current of 0.8A and a max switching frequency of 2500kHz. It operates in voltage-mode control technique, suitable for industrial applications requiring precise power regulation in compact spaces.
LM3481MM/NOPB
Switching Regulator or Controllers; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY;
LMR54406FDBVR
LMR54406FDBVR by Texas Instruments is a switching regulator with 6 terminals, operating b/w -40 to 125 °C. It has a max output voltage of 28 V and current of 0.6 A, suitable for applications requiring a compact design and efficient power management in various electronic devices.
TPS54360DDAR
TPS54360DDAR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique. The package style is small outline, making it ideal for space-constrained designs.
PTN78060WAD
PTN78060WAD by Texas Instruments is a switching regulator with 7 terminals, operating b/w -40 to 85°C. It offers an output voltage range of 2.5V to 12.6V and can handle up to 3A output current at a max frequency of 660kHz. Ideal for industrial applications requiring efficient buck switching regulators in compact microelectronic assemblies.
LMR23625CDDAR
LMR23625CDDAR by Texas Instruments is a switching regulator with 2.5A output current, 1V min output voltage, and 30V max output voltage. Ideal for automotive applications, it operates b/w -40 to 125°C and has a compact package style of small outline with low profile.
LMZ23605TZE/NOPB
LMZ23605TZE/NOPB by Texas Instruments is a switching regulator with 5A output current, 950 kHz max switching frequency, and 3.3V nominal output voltage. Ideal for industrial applications requiring efficient power management in a compact package.
TPS40210DGQ
TPS40210DGQ by Texas Instruments is a switching regulator with a max output current of 0.4A and a control mode of current-mode PWM. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various power management applications. With a compact square package style and surface-mount design, it offers efficient voltage regulation for systems requiring an input voltage range of 4.5V to 52V and an output voltage b/w 7V to 9V.
LM5001MAX/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
LMR36520ADDAR
LMR36520ADDAR by Texas Instruments is a switching regulator with 24V nominal input/output voltage, 2A max output current, and 460kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
MC34063ADR2G
Onsemi
MC34063ADR2G by Onsemi is a switching regulator with 1.5A output current, 100kHz max frequency, and 40V max input voltage. It uses pulse width modulation control technique for buck-boost configuration in commercial-grade applications. The IC is small outline SMD package with dual terminals and operates b/w 0 to 70°C temperature range.
TPS63900DSKT
TPS63900DSKT by Texas Instruments is a switching regulator with 10 terminals, operating temperature range of -40 to 85°C, and output voltage range from 1.8V to 5V. It is ideal for industrial applications requiring a compact design and low supply current of 0.00001mA. The device utilizes pulse width modulation control technique in a buck-boost configuration for efficient power management.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
L4981AD013TR
L4981AD013TR by STMicroelectronics is a current-mode switching regulator with a max output current of 2A and BCDMOS technology. It operates in automotive-grade temperatures (-40 to 125°C) and features pulse width modulation control technique. Ideal for power factor correction applications, it has a small outline package with 20 terminals and can handle input voltages from 11V to 19.5V.
L4981BD013TR
L4981BD013TR by STMicroelectronics is a current-mode switching regulator with 2A output, BCDMOS technology, and PWM control. Ideal for automotive applications, it operates b/w -40 to 125°C with a max frequency of 115kHz. The compact package features 20 terminals in a small outline design.
L4981AD
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L4984DTR
POWER FACTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
L4986A
L4986ATR
L4986B
L4984D
L4984D by STMicroelectronics is a switching regulator with 12V nominal voltage, current-mode control mode, and boost switcher configuration. It is used in power factor control applications, operates b/w -25 to 125°C, and features a small outline package with gull wing terminals for surface mounting.
L4981XD
POWER FACTOR CONTROLLER;
L4985D
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Length: 12.8 mm;
L4981BD
L4985
SWITCHING REGULATOR; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: BCDMOS;
L4981B
POWER FACTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
L4985A
L4985ATR
L4981A
L4985B
L4981X
L4985BTR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved