Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SIL05-1A72-71LHR by Standex-Meder Electronics is a 1 FORM A SPST reed relay with 0.7ms operate time and 1000000000 cycle electrical life. It has MBB relay action, 5V nominal coil voltage, and is ideal for AC/DC contact or output supply applications.
Median Price
$4.145
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
< 1k
Element14
1+ parts
$3.672
100+ parts
$2.165
1k+ parts
$1.888
10k+ parts
$1.844
Newark
$4.080
$3.010
$2.430
-
Mouser Electronics
$4.210
$3.120
$2.210
Farnell
$5.683
$2.770
Nova Conductors
$1.789
Vyrian
Schukat
$2.280
$2.170
Ack Elektronik San.Tic.Ltd.Sti
Fibra_Brandt Electronic GMBH
Argo Parts USA
Continental Prestige Electronics
$4.020
$1.960
AZTECH Wire
$5.315
Authorized Procurement Solutions
Netroflash
$1.753
$1.700
$1.664
Single Pole Single Throw relay function offers a simple and reliable switching solution for various applications.
Fast operate time ensures quick response and efficient switching of the relay.
Long electrical life span ensures durability and reliability for extended use.
High insulation resistance ensures safe and reliable operation of the relay.
Operating temperature up to 70°C allows for use in a wide range of environments.
Compact body size of 19.8mm makes it suitable for applications with space constraints.
Low DC coil current consumption of 0.005A helps in energy efficiency.
Tin terminal finish provides good conductivity and solderability for easy installation.
High maximum AC contact current rating of 1A allows for handling of moderate electrical loads.
Reed Relays SIL05-1A72-71LHR attributes and parameters. Explore more Reed Relays devices from Standex-Meder Electronics
Relay Type:
Relay Action:
Relay Function:
Relay Form:
Input Switching Method:
Contact Maximum DC Current:
Contact Maximum DC Voltage:
Contact Maximum DC Rating (R Load):
Contact Resistance:
Coil Maximum DC Voltage:
Contact Maximum AC Current:
Contact Maximum AC Voltage:
Contact Maximum AC Rating (R Load):
Coil Resistance:
Coil/Input Supply Type:
Coil Maximum DC Current:
Coil DC Operate Voltage:
Coil DC Release Voltage:
Coil Power:
Coil Nominal Voltage:
Termination Type:
Terminal Finish:
Activation Time:
Release Time:
Minimum Operating Temperature:
Maximum Operating Temperature:
Insulation Resistance:
Width:
Height:
Length/Diameter:
Dimensions:
Terminal Count:
Terminal Length:
Mounting Type:
Lifespan:
JESD-609 Code:
SIL05-1A72-71LHR Relays trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.49.00.50
SB
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM358AN
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
AH180-WG-7
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
KT24-1A-40L-SMD
Standex-meder Electronics
KT24-1A-40L-SMD by Standex-Meder Electronics is a 1 FORM A SPST reed relay with 1.1ms operate time and MBB relay action. With a coil resistance of 1800 ohm, it operates at -40 to 100°C, making it ideal for AC/DC switching applications requiring high insulation resistance and low contact resistance.
CRF05-1AS(250)
CRF05-1AS(250) by Standex-Meder Electronics is a 1 FORM A SPST Reed Relay with 0.6ms operate time, 10000000000 ohm insulation resistance, and MBB relay action. Ideal for AC/DC contact supply applications, it has a max operating temperature of 125°C and operates at a coil voltage of 5V.
HE722A2420
Littelfuse
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: CUL; UL;
HE721E0500
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPDT; Coil or Input Supply Type: DC; Reference Standard: CUL; UL;
9007-05-01
Coto Technology
Coto Technology's 9007-05-01 Reed Relay features SPST function, 0.5ms operate time, and 10W@200VDC power rating. Ideal for AC/DC supply applications with 0.5A@200VAC contact rating. HERMETICALLY SEALED design ensures reliability in various environments.
JWD-172-4
TE Connectivity
TE Connectivity's JWD-172-4 Reed Relay offers SPDT function, 2 FORM A form, and 1.5ms operate time. With a max DC power rating of 3W@10VDC, it is ideal for applications requiring momentary relay action in various industries.
HE72-2-A-05-50
HE721C2410
Hamlin Electronics Europe
104-2-A-5/2D
Pickering Electronics
The Pickering Electronics 104-2-A-5/2D is a DPST dry reed relay with 2 FORM A configuration. It has a max contact DC power rating of 10W@1000VDC and operates at a nominal coil voltage of 5V. With a compact size of 29mm x 6.22mm x 12.5mm, it is ideal for applications requiring momentary relay action on PCBs with through-hole mounting.
HE721C0540
DIP05-1A72-12D
Meder Electronic Ag
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: UL;
HE424C0583
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: 4PDT; Operate Time: 3 ms; Minimum Operating Temperature: -40 Cel;
HE721E1220
HE721B2400
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CUL; UL;
HE721A1200
HE721A1210
HE721A1210 by Littelfuse is a 1 FORM A SPST Reed Relay with 1ms operate time, 10000000000 ohm insulation resistance, and hermetically sealed body. Ideal for applications requiring momentary relay action in environments with temperatures ranging from -40 to 85 °C.
JWD-171-27
Tyco Electronics Elcon
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MBB; Relay Function: DPST; Coil or Input Supply Type: DC; Reference Standard: CSA; UL;
HE721A0550
MS12-1A87-75L
MS12-1A87-75L by Standex-Meder Electronics is a 1 FORM A SPST reed relay with 0.5ms operate time and 100000000000 ohm insulation resistance. It is used in applications requiring AC/DC contact supply, featuring MBB relay action and 0.5A@200VAC max contact rating for R load.
HI12-1A85
HI12-1A85 by Standex-Meder Electronics is a 1 FORM A SPST reed relay with 1.1ms operate time and 10000000000000 ohm insulation resistance. Ideal for AC/DC applications, it has a max contact rating of 1A@1000VAC/DC and operates at temperatures ranging from -20 to 70 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SIL05-1A72-71L
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Maximum DC Contact Voltage: 200 V;
Standex-Meder Electronics
SIL05-1A72-71L by Standex-Meder Electronics is a 1 FORM A SPST reed relay with an operate time of 0.5 ms. It has a max AC contact current of 0.5 A and is commonly used in AC/DC contact or output supply applications.
SIL05-1A72-71D
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Body Width: 5.08 inch;
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT; Relay Action: MBB; Relay Function: SPST; Coil or Input Supply Type: DC; Reference Standard: CUL; UL;
SIL05-1A72-71LHR
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MBB; Relay Function: SPST; Coil or Input Supply Type: DC; Terminal Finish: TIN;
SIL05-1A72-71DHR
SIL05-1A72-71DHR by Standex-Meder Electronics is a SPST Reed Relay with 0.7ms operate time and 1000000000 cycle electrical life. It is waterproof, suitable for AC/DC applications, and has a coil resistance of 1100 ohm. Ideal for high-speed switching in various electronic devices.
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MOMENTARY; Relay Function: SPST; Coil or Input Supply Type: DC; Manufacturer Series: SIL05-1A72-71DHR;
SIL05-1A75-71D
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MBB; Relay Function: SPST; Coil or Input Supply Type: DC; Contact or Output Supply Type: AC/DC;
SIL05-1A75-71L
DRY REED RELAY; Mounting Feature: THROUGH HOLE-STRAIGHT MOUNT; Relay Action: MBB; Relay Function: SPST; Coil or Input Supply Type: DC; Relay Form: 1 FORM A;
SIL05-1A72-71M
SIL05-1A72-71Q
SIL05-1A72-73L
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved