Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Smiths Group Plc's 42-1072 RF/Microwave Termination handles up to 43.01 dBm CW power with a VSWR of 1.3, covering 0-2000 MHz range. Ideal for RF applications requiring a 50 ohm impedance, this MODULE construction device ensures efficient signal termination and reflection suppression.
Median Price
$1.520
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Newark
1+ parts
$1.960
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$1.990
$1.860
Verical
$1.510
Powell Electronics
Avnet
TME
$1.950
VNN
Nova Conductors
Aztec Data Supply Inc.
$2.413
Assy Fe
Continental Prestige Electronics
Argo Parts USA
Aranea Global
This RF/Microwave termination can handle high input power levels, making it suitable for demanding applications where power handling capability is important.
With a low VSWR value of 1.3, this termination ensures minimal signal reflection and efficient power transfer, resulting in reliable performance in various RF and microwave systems.
The modular construction of this termination enables easy integration into existing RF systems and allows for flexibility in system design and configurations.
Designed specifically as a termination device, this product offers impedance matching and signal absorption capabilities to prevent signal reflection, ensuring signal integrity and system performance.
With a characteristic impedance of 50 ohm, this termination is compatible with standard RF systems and ensures efficient power transfer and signal integrity.
This termination can operate at frequencies as low as 0 MHz, making it suitable for a wide range of RF and microwave applications, including both low and high frequency bands.
Capable of operating up to 2000 MHz, this termination is ideal for applications that require termination of signals within this frequency range, providing versatility in usage.
RF/Microwave Terminations 42-1072 attributes and parameters. Explore more RF/Microwave Terminations devices from Smiths Group Plc
Characteristic Impedance:
Construction:
Maximum Input Power (CW):
Maximum Operating Frequency:
Minimum Operating Frequency:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
We are Pioneers of Progress. For over 170 years, Smiths has been improving our world through smarter engineering. Our technology benefits millions of people every day – making travel safer, supporting sustainable energy transition, efficiently heating or cooling our homes, and helping our world stay connected.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Weitronic Enterprise
Bkc Semiconductors
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
4554
Jw Miller Magnetics
Other Semiconductors;
1431
Cobham Plc
1431 by Cobham Plc is an RF/Microwave Termination with a Max Input Power of 50 dBm, VSWR of 1.3, and operates from 0-18000 MHz. Constructed coaxially, it's ideal for high-power RF/Microwave applications requiring efficient signal termination.
1433
Api Technologies
RF/MICROWAVE TERMINATION; Maximum Input Power (CW): 53.98 dBm; Maximum Voltage Standing Wave Ratio: 1.15; Additional Features: N, I/P POWER-MAX(PEAK)=10000W; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz;
3008
Aeroflex Plainview
RF/MICROWAVE TERMINATION; Minimum Operating Temperature: -65 Cel; Maximum Operating Temperature: 125 Cel; Characteristic Impedance: 50 ohm; Additional Features: SMA-F; SMA-M; JESD-609 Code: e4;
1445-1
Aeroflex/weinschel
RF/MICROWAVE TERMINATION; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 36.99 dBm; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 125 Cel;
ANNE-50CN
Mini-circuits
ANNE-50CN by Mini-circuits is a 50 ohm RF/Microwave Termination with a max input power of 30 dBm. It operates from 0 to 18000 MHz, constructed coaxially with Tin/Lead terminals. Ideal for terminating RF and microwave signals in various applications.
PST-1
Aeroflex/kdi
RF/MICROWAVE TERMINATION; Maximum Voltage Standing Wave Ratio: 1.5; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -55 Cel; Construction: MODULE; Maximum Operating Frequency: 18000 MHz;
FT10302N0050JBK
KYOCERA AVX
FT10302N0050JBK by KYOCERA AVX is an RF/Microwave Termination with 43.01 dBm CW power, 1.25 VSWR, and 50 ohm impedance. It operates from -55 to 150 °C and covers frequencies from 0-18000 MHz. Ideal for high-power RF applications requiring precise termination.
LT11020T0050JBK
American Technical Ceramics
RF/MICROWAVE TERMINATION; JESD-609 Code: e4; Minimum Operating Temperature: -55 Cel; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.25; Minimum Operating Frequency: 0 MHz;
LT12525T0050J02
LT12525T0050J02 by KYOCERA AVX is a RF/Microwave Termination with 50 dBm CW power, 1.2 VSWR, and MIL-PRF-55342 screening. It operates from -55°C to 150°C, has 50 ohm impedance, and covers frequencies from 0 MHz to 4000 MHz. Ideal for surface mount applications in RF and microwave systems.
1439
1439 by Cobham Plc is an RF/Microwave Termination with a max input power of 51.76 dBm, VSWR of 1.2, and operates from -55°C to 100°C. Ideal for applications requiring a characteristic impedance of 50 ohms in the frequency range of 0-2500 MHz.
CT1005
Emc Technology & Florida Rf Labs
RF/MICROWAVE TERMINATION; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 41.76 dBm; Maximum Voltage Standing Wave Ratio: 1.25; Terminal Finish: Tin/Lead (Sn/Pb) - with Nickel (Ni) barrier; Minimum Operating Temperature: -55 Cel;
C8A50Z4B
Ttm Technologies
C8A50Z4B by Ttm Technologies is an RF/Microwave Termination with a max input power of 39.03 dBm and operating frequency range from 0-6000 MHz. It has a characteristic impedance of 50 ohm, matte tin over nickel terminal finish, and can operate in temperatures ranging from -55 to 125 °C. Ideal for high-power RF applications requiring precise impedance matching.
250-50TC
The Ttm Technologies 250-50TC is an RF/Microwave Termination with a max input power of 53.98 dBm and VSWR of 1.3. It operates b/w -55°C to 150°C, covering frequencies from 0 MHz to 3000 MHz. Ideal for applications requiring high power handling and precise impedance matching in RF/microwave systems.
1427
RF/MICROWAVE TERMINATION; Maximum Input Power (CW): 43.98 dBm; Maximum Voltage Standing Wave Ratio: 1.3; Construction: COAXIAL; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 10000 MHz;
1442
RF/MICROWAVE TERMINATION; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Input Power (CW): 50 dBm; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 8500 MHz; Additional Features: N, I/P POWER-MAX(PEAK)=5000W;
RF/MICROWAVE TERMINATION; Mounting Feature: SURFACE MOUNT; No. of Terminals: 1; Screening Level: MIL-PRF-55342; JESD-609 Code: e4; Maximum Operating Temperature: 150 Cel;
1430
RF/MICROWAVE TERMINATION; Construction: COAXIAL; Maximum Input Power (CW): 46.99 dBm; Minimum Operating Frequency: 0 MHz; Additional Features: N, I/P POWER-MAX(PEAK)=1000W; Maximum Operating Frequency: 18000 MHz;
1452
1452 by Cobham Plc is an RF/Microwave Termination with a CW power of 43.98 dBm, VSWR of 1.2, and operating frequency range from 0-4000 MHz. Ideal for applications requiring high power handling and impedance matching in RF/microwave systems.
3009
RF/MICROWAVE TERMINATION; JESD-609 Code: e4; Maximum Operating Frequency: 1000 MHz; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.25; Maximum Operating Temperature: 125 Cel;
5665
RF/MICROWAVE TERMINATION; Characteristic Impedance: 50 ohm; JESD-609 Code: e0; Construction: MODULE; Maximum Operating Frequency: 1000 MHz; Maximum Input Power (CW): 56.02 dBm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
42-1045
Florida Rf Labs
RF/MICROWAVE TERMINATION; Construction: MODULE; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 34.77 dBm; Minimum Operating Frequency: 0 MHz;
Smiths Group Plc
RF/MICROWAVE TERMINATION; Minimum Operating Frequency: 0 MHz; Construction: MODULE; Maximum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 34.77 dBm; Maximum Voltage Standing Wave Ratio: 1.25;
42-1072
RF/MICROWAVE TERMINATION; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 2000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 43.01 dBm; Maximum Voltage Standing Wave Ratio: 1.3;
42-1011-ST
RF/MICROWAVE TERMINATION; Minimum Operating Frequency: 0 MHz; Maximum Operating Temperature: 150 Cel; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 43.01 dBm; JESD-609 Code: e4;
42-1017
RF/MICROWAVE TERMINATION; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; Construction: MODULE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
42-1032
RF/MICROWAVE TERMINATION; Maximum Input Power (CW): 41.76 dBm; Construction: MODULE; JESD-609 Code: e4; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Frequency: 0 MHz;
42-1057
RF/MICROWAVE TERMINATION; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel; Maximum Input Power (CW): 41.76 dBm; Construction: MODULE;
42-1003
RF/MICROWAVE TERMINATION; Construction: MODULE; Maximum Input Power (CW): 40 dBm; Minimum Operating Frequency: 0 MHz; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 18000 MHz;
42-1008
RF/MICROWAVE TERMINATION; Minimum Operating Frequency: 0 MHz; Maximum Operating Frequency: 18000 MHz; Construction: MODULE; Maximum Input Power (CW): 40 dBm; Characteristic Impedance: 50 ohm;
42-1056
RF/MICROWAVE TERMINATION; Maximum Operating Frequency: 18000 MHz; Maximum Input Power (CW): 43.01 dBm; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm; Minimum Operating Frequency: 0 MHz;
42-1069
RF/MICROWAVE TERMINATION; Construction: MODULE; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 41.76 dBm; Maximum Operating Frequency: 18000 MHz;
42-1070
RF/MICROWAVE TERMINATION; Construction: MODULE; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.065; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 40 dBm;
42-1073
RF/MICROWAVE TERMINATION; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 44.77 dBm; Construction: MODULE; Maximum Voltage Standing Wave Ratio: 1.065; Minimum Operating Frequency: 0 MHz;
RF/MICROWAVE TERMINATION; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 18000 MHz; JESD-609 Code: e4; Maximum Operating Temperature: 125 Cel;
RF/MICROWAVE TERMINATION; Maximum Operating Temperature: 150 Cel; Maximum Voltage Standing Wave Ratio: 1.3; Characteristic Impedance: 50 ohm; Minimum Operating Temperature: -55 Cel; Terminal Finish: GOLD;
RF/MICROWAVE TERMINATION; Maximum Operating Frequency: 2000 MHz; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 44.77 dBm; Maximum Voltage Standing Wave Ratio: 1.065; Characteristic Impedance: 50 ohm;
RF/MICROWAVE TERMINATION; Maximum Voltage Standing Wave Ratio: 1.065; Minimum Operating Frequency: 0 MHz; Characteristic Impedance: 50 ohm; Maximum Input Power (CW): 40 dBm; Maximum Operating Frequency: 2000 MHz;
42-1031
RF/MICROWAVE TERMINATION; Maximum Operating Frequency: 12400 MHz; Maximum Input Power (CW): 41.76 dBm; Characteristic Impedance: 50 ohm; Maximum Voltage Standing Wave Ratio: 1.3; Minimum Operating Frequency: 0 MHz;
42-1034
RF/MICROWAVE TERMINATION; Construction: MODULE; Maximum Operating Frequency: 12400 MHz; Minimum Operating Frequency: 0 MHz; Maximum Input Power (CW): 41.76 dBm; Maximum Voltage Standing Wave Ratio: 1.3;
42-1060
RF/MICROWAVE TERMINATION; Maximum Input Power (CW): 43.01 dBm; Characteristic Impedance: 50 ohm; Construction: MODULE; Maximum Voltage Standing Wave Ratio: 1.3; Maximum Operating Frequency: 18000 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved