Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' WT11I-E-AI5 is a telecom IC with 28 terminals, operating b/w -40°C to 85°C. With a nominal voltage of 3.3V, it features a rectangular package style measuring 14.5mm in width and 35.75mm in length. Ideal for industrial applications requiring telecom circuit interfaces at a terminal pitch of 1.5mm.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
AZTECH Wire
$16.597
Ampacity Inc.
$997.000
Aranea Global
Corphita
Rectangular package shape allows for easy integration into circuit boards and ensures efficient use of space.
Having 28 terminals provides flexibility in connectivity options and allows for versatile application scenarios.
With a high maximum operating temperature, this product can withstand harsh operating conditions and ensure reliability in various environments.
The ability to operate at low temperatures makes this product suitable for use in both hot and cold climates.
The 3.3 V supply voltage is commonly used in electronic devices, ensuring compatibility with existing systems.
Other Function Telecom Interface ICs WT11I-E-AI5 attributes and parameters. Explore more Other Function Telecom Interface ICs devices from Silicon Labs
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
WT11I-E-AI5 Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - EOL 23/Dec/2015
PCN Packaging - Multi Devices 15/Jan/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Jiejie Microelectronics
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
CRGCQ0805F10K
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
IRLML6402TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Daco Semiconductor
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BGT24MTR12E6327XUMA1
Infineon Technologies
BGT24MTR12E6327XUMA1 by Infineon is a telecom IC with 32 terminals in a chip carrier package. It operates b/w -40 to 105°C, suitable for industrial use. With a supply voltage of 3.3V, it features a terminal pitch of 0.5mm and is surface mountable for various telecom interface applications.
ODIN-W260-04B-00
U-blox Ag
Other Telecom ICs; Moisture Sensitivity Level (MSL): 4;
ATWILC3000-MR110UA
Microchip Technology
ATWILC3000-MR110UA by Microchip Technology is a telecom IC with 36 terminals, operating at 3.3V. It offers a data rate of 65 Mbps and operates b/w -40 to 85°C. Ideal for applications requiring high-speed wireless communication in compact devices.
WL1801MODGBMOCR
WL1801MODGBMOCR by Texas Instruments is a telecom IC with 100 terminals, operating at 3.7V. It offers a data rate of 100 Mbps and can withstand temperatures from -20 to 70°C. Ideal for telecom applications requiring high-speed data transmission in commercial-grade environments.
NEO-M8T-0-10
NEO-M8T-0-10 by U-blox Ag is a telecom IC with 24 terminals, operating at -40 to 85°C. It has a supply voltage of 3V and MSL level of 4, suitable for industrial applications requiring precise positioning and timing accuracy. With its compact rectangular package style, it's ideal for space-constrained environments.
XBP9X-DMUS-001
Digi International
XBP9X-DMUS-001 by Digi Int. is a RECTANGULAR MICROELECTRONIC ASSEMBLY with 37 terminals, operating from -40 to 85 °C at 3.3V. It's a 0.25 Mbps TELECOM CIRCUIT IC ideal for telecom interfaces due to its surface mount capability and NO LEAD terminal form.
BQ51013ARHLR
BQ51013ARHLR by Texas Instruments is a telecom interface IC with 20 terminals in a chip carrier package. It operates b/w 0-125°C, has a supply voltage of 5V, and data rate of 0.002 Mbps. Ideal for telecom circuits, it features nickel/palladium/gold terminal finish and very thin profile package style.
DA14531-00000OG2
Dialog Semiconductor
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 17; Package Code: VFBGA; Package Shape: RECTANGULAR;
ST25R3914-AQWT
STMicroelectronics
TELECOM CIRCUIT; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
DC-ME4-01T-S-UPW
DC-ME4-01T-S-UPW by Digi Int. is a SERIAL DEVICE SERVER with 100 Mbps Data Rate, operating at -40 to 85°C. Its MICROELECTRONIC ASSEMBLY package measures 19.05mm x 36.7mm x 18.67mm, ideal for telecom interfaces in various applications.
CLRC66302HN,157
NXP Semiconductors
The NXP Semiconductors CLRC66302HN,157 is a telecom interface IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 105°C and has a data rate of 1 Mbps at 5V supply voltage. Ideal for industrial applications requiring high-speed communication in compact spaces.
CYBLE-222014-01
CYBLE-222014-01 by Infineon Technologies is a surface mount telecom IC with 22 terminals. It operates at temperatures ranging from -40 to 85 °C and has a seated height of 1.9 mm. This IC is commonly used in industrial applications requiring a nominal voltage of 3.3 V.
DW1000-ITR13
Qorvo
DW1000-ITR13 by Qorvo is a 48-terminal IC with CMOS tech, operating at -40 to 85°C. It has a data rate of 6.8 Mbps and runs on 1.8V supply voltage. Ideal for telecom circuits, this square chip carrier is surface-mountable and features a very thin profile for industrial applications.
XB3-24Z8CM-J
XB3-24Z8CM-J by Digi International is a telecom IC with 34 terminals, suitable for industrial use. It operates b/w -40°C to 85°C, in a rectangular microelectronic assembly package measuring 13mm x 19mm. This surface-mount IC is ideal for various telecom interface applications.
NEO-M8P-2-11
NEO-M8P-2-11 by U-blox Ag is a telecom IC with 24 terminals, operating temperature range of -40 to 85 °C. It features AEC-Q100 screening level and TS 16949 certification. Ideal for industrial applications requiring precise positioning and reliable communication.
BG96MA-128-SGN
Quectel Wireless Solutions
BG96MA-128-SGN by Quectel is a telecom IC with 102 terminals, operating from -40 to 85°C. It has a compact rectangular package, measuring 22.5mm in width and 26.5mm in length, suitable for industrial applications requiring a nominal voltage of 3.8V.
F2480NBGI8
Renesas Electronics
TELECOM CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Terminal Finish: Tin (Sn);
RS9116W-SB00-QMS-B24
Silicon Labs
TELECOM CIRCUIT;
LMH0344SQE/NOPB
National Semiconductor
Other Telecom ICs; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: QCCN; Package Shape: SQUARE;
CC2640R2FRHBR
CC2640R2FRHBR by Texas Instruments is a telecom IC with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, with a supply voltage of 3V. Ideal for telecom circuits, it features nickel palladium gold terminal finish and very thin profile packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
WT11U-A-AI56
Other Telecom ICs;
WT11U-E-AI56
WT11U-A-AI4
Silicon Labs' WT11U-A-AI4 is a CMOS telecom IC with 28 terminals, operating at -40 to 85°C. With a data rate of 3 Mbps and nominal voltage of 3.3V, it's ideal for telecom circuit applications requiring high-speed communication in compact spaces.
WT11I-A-AI4
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; Package Body Material: UNSPECIFIED;
WT11I-A-AI3
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; No. of Functions: 1;
WT11I-A-AI5
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; Width: 14.5 mm;
WT11I-A-HCI21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
WT11I-E-AI3
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; Nominal Supply Voltage: 3.3 V;
WT11I-E-AI4
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; Terminal Pitch: 1.5 mm;
WT11I-E-HCI21
TELECOM CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 28; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved