Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8663BC-B-IS1 by Silicon Labs is a digital isolator with 16 terminals, operating voltage range of 2.375V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, dual terminal position, and small outline package style suitable for high-temperature environments up to 125°C. With gull wing terminal form and compact dimensions of 9.9mm x 3.9mm x 1.75mm, it is ideal for surface mount PCB designs in various electronic systems.
Median Price
$4.714
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$4.057
100+ parts
$3.094
1k+ parts
-
10k+ parts
Mouser Electronics
$5.370
$3.380
$3.140
$3.020
DigiKey
$5.430
$3.638
$3.191
$3.025
Verical
$3.441
$3.085
Nova Conductors
$3.606
Digiode
$3.854
TME
$8.510
Chip Stock
Vyrian
Demsay Elektronik
$750.000
$1,000.000
Inventory MP
Bristol Electronics
NexGen Digital
Semicontronic
$2.630
$2.564
$2.551
Ampacity Inc.
Corohmni
$2.953
Advanced Electronics
$3.042
$2.890
Continental Prestige Electronics
$3.533
$3.462
Argo Parts USA
Netroflash
$3.534
Corphita
$3.651
Aztec Data Supply Inc.
$11.441
QUARKTWIN TECHNOLOGY LTD
RC Electronics
$3.680
$3.360
$3.260
Lixinc
Perfect Parts
Glotronic Ltd.
The use of plastic/epoxy as the package body material provides durability and protection for the internal components of the IC, ensuring longevity and reliability.
Being surface mountable means that the IC can be easily mounted onto circuit boards, making it suitable for automated assembly processes and saving space in the final product design.
With a high maximum supply voltage of 5.5V, this IC can be used in a wide range of applications without the risk of damage from voltage spikes or fluctuations.
Having AEC-Q100 screening level ensures that the IC meets the rigorous quality and reliability standards required for automotive applications, making it a dependable choice for automotive electronics.
The rectangular package shape is commonly used and easy to integrate into existing circuit designs, providing versatility and compatibility with various PCB layouts.
With 16 terminals, this IC offers multiple connection points for interfacing with other components or systems, enabling complex functions and communication capabilities.
The small outline package style makes the IC compact and space-efficient, ideal for applications where size constraints are a concern and allowing for more flexibility in the design layout.
The low minimum supply voltage of 2.375V allows for operation in low power environments or battery-powered devices, making it energy-efficient and suitable for portable electronics.
With a high maximum operating temperature of 125°C, this IC can withstand elevated temperatures without performance degradation, ensuring reliable operation in harsh environmental conditions.
The wide operating temperature range starting from -40°C enables the IC to function in extreme cold environments, making it suitable for a variety of industrial and outdoor applications.
Dual terminal position offers redundancy and improved connectivity, reducing the risk of signal loss or interference and enhancing overall system reliability and performance.
The low maximum seated height of 1.75mm allows for a slim profile and compact design, making the IC suitable for applications where height restrictions or space constraints are a consideration.
The narrow width of 3.9mm makes the IC space-efficient and compatible with tight PCB layouts, providing more flexibility in overall product design and integration.
With a length of 9.9mm, this IC is compact and suitable for applications where board space is limited, allowing for more efficient use of space and enabling sleek product designs.
Utilizing CMOS technology offers low power consumption, high noise immunity, and fast switching speeds, making the IC energy-efficient, reliable, and suitable for high-speed digital applications.
The gull wing terminal form provides secure solder connections and increased mechanical strength, ensuring robust and reliable electrical connections for stable performance.
With a nominal supply voltage of 5V, this IC is compatible with standard power sources and voltage levels, making it easy to integrate into existing systems or circuit designs.
The tight terminal pitch of 1.27mm allows for high-density mounting and space-saving on PCBs, enabling compact and efficient circuit designs without compromising on connectivity.
As a digital isolator, this IC provides electrical isolation between input and output circuits, preventing ground loops, reducing noise, and enhancing system safety and reliability in sensitive applications.
Other Function Interface ICs SI8663BC-B-IS1 attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8663BC-B-IS1 Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Baneasa S A
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
Dc Components
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
NE555D
Fairchild Semiconductor
ISO7731FQDWRQ1
ISO7731FQDWRQ1 by Texas Instruments is an AEC-Q100 compliant interface IC with 3 functions, operating at -40 to 125°C. It has a supply voltage range of 2.25-5.5V and features a small outline package suitable for automotive applications. The CMOS technology, GULL WING terminals, and nickel/palladium/gold finish make it ideal for various automotive interface circuit designs.
PCA9617ATPZ
NXP Semiconductors
PCA9617ATPZ by NXP Semiconductors is an 8-terminal interface IC with a supply voltage range of 0.8V to 5.5V, suitable for industrial applications. It operates in temperatures from -40°C to 85°C and features a small outline package style with a rectangular shape. The device is designed for surface mount assembly and uses CMOS technology for efficient performance.
SI8641BD-B-IS
Skyworks Solutions
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
ADUM3160WBRWZ
Analog Devices
ADUM3160WBRWZ by Analog Devices is a digital isolator with 16 terminals, operating voltage range of 3-5.5V, and industrial temperature grade. It features CMOS technology, Gull Wing terminal form, and AEC-Q100 screening level. Ideal for applications requiring high reliability in harsh environments like automotive electronics.
ISO7721DR
ISO7721DR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125 °C and supports supply voltages from 2.25V to 5.5V. With a small outline package style, it's ideal for military-grade applications requiring reliable signal isolation in compact spaces.
PCA9306DC1Z
PCA9306DC1Z by NXP Semiconductors is an Interface IC with 8 terminals, operating voltage range of 1V to 3.6V, and temperature range from -40°C to 105°C. It features a small outline package style suitable for various applications requiring level shifting and bidirectional voltage translation.
LTC6820HUD#PBF
LTC6820HUD#PBF by Analog Devices is a CMOS interface IC with 16 terminals, operating b/w -40 to 125 °C. It has a supply voltage range of 2.7V to 5.5V and is suitable for automotive applications due to its high-temperature grade. The package style is chip carrier with a very thin profile, making it ideal for space-constrained designs.
ISO7721FDR
ISO7721FDR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -55 to 125°C, suitable for military-grade applications. With a small outline package style and surface mount compatibility, it offers a max supply voltage of 5.5V for robust performance in various electronic systems.
SN6505ADBVR
SN6505ADBVR by Texas Instruments is a small outline interface IC with 6 terminals, operating b/w -55 to 125°C. It has a max supply voltage of 5.5V and can handle up to 1.5A output current. Ideal for military-grade applications requiring low profile components in compact spaces.
MAX253ESA/V+
MAX253ESA/V+ by Analog Devices is an 8-terminal interface IC with a supply voltage range of 4.5V to 5.5V, suitable for industrial applications. It features a small outline package style, CMOS technology, and AEC-Q100 screening level for reliable performance in temperatures ranging from -40°C to 85°C.
SI8645BA-B-IU
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
ADG3304BRUZ
ADG3304BRUZ by Analog Devices is a CMOS interface IC with 14 terminals and a max supply voltage of 5.5V. It operates in industrial temperature range (-40 to 85 °C) and is suitable for applications requiring small outline, thin profile packages like signal routing and switching circuits.
ISO1211D
The Texas Instruments ISO1211D is a digital I/P module with 8 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.25-60 V and comes in a small outline package suitable for surface mount applications. With nickel palladium gold terminal finish, it offers reliable performance in various electronic systems.
TXS0102DCTTE4
TXS0102DCTTE4 by Texas Instruments is a 2-bit interface IC with 3-STATE output. It operates b/w -40 to 85 °C and supports supply voltages of 1.65-5.5 V, making it ideal for industrial applications requiring low-profile, small-outline packages.
SI8642ED-B-IS2R
Silicon Labs
SI8642ED-B-IS2R by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package with 16 terminals and Gull Wing terminal form. Ideal for applications requiring high-speed data isolation in compact designs.
ZIOL2401BI1W
Integrated Device Technology
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ISO7741QDWWQ1
ISO7741QDWWQ1 by Texas Instruments is a 4-channel interface IC with CMOS technology. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 2.25-5.5V, it comes in a small outline package with dual terminals and nickel/palladium/gold finish.
ISO7420FEDR
ISO7420FEDR by Texas Instruments is a dual-function interface IC with 2 channels. It operates b/w -40 to 125°C, suitable for automotive applications. With a supply voltage range of 3.3V to 5V, it comes in a small outline package ideal for surface mount assembly.
SI8640BC-B-IS1
SI8640BC-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375-5.5V, and temp range of -40 to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
FXMAR2102L8X
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: VQCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
SI8641BB-B-IS1
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
SI8641BA-B-IUR
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
SI8661BB-B-IS1
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved