Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI8641BB-B-IS by Silicon Labs is a digital isolator with 4 functions. It operates at a supply voltage range of 2.375V to 5.5V and has a small outline package style. It is commonly used for interface applications requiring isolation b/w different circuits.
Median Price
$3.192
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.800
100+ parts
$2.512
1k+ parts
$2.184
10k+ parts
$2.059
Mouser Electronics
$3.920
$2.400
$2.240
$2.120
Chip1Stop
$3.992
$2.805
-
Arrow
$2.583
$2.245
$2.117
Verical
RS (Exports)
$2.185
$2.078
Component Electronics Inc.
$2.310
$1.730
$1.500
Digiode
$2.935
Nova Conductors
$3.291
TME
$5.860
Vyrian
Chip Stock
Martec Srl
Bristol Electronics
Cyclops Electronics Ltd
Component Stockers USA
$1.540
$1.400
Corohmni
$1.751
Advanced Electronics
$1.804
$1.713
Semicontronic
$1.810
$1.765
$1.756
Ampacity Inc.
Argo Parts USA
$2.457
Continental Prestige Electronics
$2.408
Corphita
$2.780
Aztec Data Supply Inc.
$6.068
RC Electronics
$2.470
$2.250
$2.190
Infinite Electronics LLP (Excess)
Perfect Parts
Netroflash
$3.225
$3.126
$3.061
The use of plastic/epoxy as the package body material makes the product lightweight and durable, ensuring long-term reliability.
Being surface mount compatible allows for easy and efficient integration onto circuit boards, saving space and simplifying assembly.
The high maximum supply voltage capability provides versatility in various power supply applications, accommodating different voltage levels.
With 4 functions in one IC, this product offers enhanced functionality and integration, reducing the need for multiple components.
The rectangular package shape allows for efficient use of space on the PCB, enabling compact designs and optimizing board layout.
Having 16 terminals provides ample connectivity options, facilitating versatile connections and configurations for different applications.
The small outline package style saves space on the board, making it suitable for compact designs where size constraints are a consideration.
The low minimum supply voltage requirement allows for operation in low-power scenarios, providing energy efficiency and flexibility.
The high maximum operating temperature rating ensures reliability even in harsh or high-temperature environments, increasing the product's durability.
The wide temperature range allows for operation in extreme cold conditions, making the product suitable for various environmental conditions.
The dual terminal position offers redundancy and improved connectivity reliability, reducing the risk of connection failures in demanding applications.
The low maximum seated height saves vertical space on the board, making it suitable for compact designs and slim form factors.
The compact width dimension enables efficient board space utilization, allowing for tight layouts and compact system designs.
The high peak reflow temperature tolerance ensures reliability during the soldering process, maintaining product quality and consistency.
The appropriate length dimension offers a balance between space-saving and functionality, making it suitable for various board sizes and layouts.
The CMOS technology used in the IC offers low power consumption, high noise immunity, and compatibility with a wide range of applications, enhancing overall performance.
The gull wing terminal form provides reliable solder joints and mechanical strength, ensuring secure connections and long-lasting performance.
The nominal supply voltage of 5V is a common standard in many applications, making the product compatible and easy to integrate into existing systems.
The standard terminal pitch allows for easy connection and compatibility with standard PCB layouts, simplifying the assembly process.
As a digital isolator, this product provides electrical isolation between input and output signals, offering protection and noise immunity in high-voltage applications.
Other Function Interface ICs SI8641BB-B-IS attributes and parameters. Explore more Other Function Interface ICs devices from Silicon Labs
Additional Features:
Interface IC Type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
SI8641BB-B-IS Interface ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99WT1G
Onsemi
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hy Electronic
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ISO1541D
Texas Instruments
ISO1541D by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 3V to 5.5V, suitable for automotive applications. It features dual terminal position, Gull Wing form, and operates in temperatures from -40°C to 125°C. The small outline package style makes it ideal for surface mount designs.
SI8641BB-B-IS1
Silicon Labs
SI8641BB-B-IS1 by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for surface mount applications in various electronic devices.
SI8622EC-B-IS
Skyworks Solutions
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Length: 4.9 mm;
ADUM1201WTRZ-RL7
Analog Devices
ADUM1201WTRZ-RL7 by Analog Devices is an 8-terminal IC with dual functions, operating at -40 to 125 °C. It has a supply voltage range of 3-5.5 V and is AEC-Q100 certified for automotive applications. This small outline package IC features CMOS technology, matte tin finish, and gull wing terminals for interface circuit designs.
EL6203CWZ-T7
Intersil
INTERFACE CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
MAX7301AAI+T
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SSOP; Package Shape: RECTANGULAR;
SI8663BD-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
MAX14933ASE+
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP16,.24;
PCA9600DP/S911,118
NXP Semiconductors' PCA9600DP/S911,118 is an Interface IC with 2 functions, operating at a voltage range of 2.5V to 15V. It comes in a small outline package suitable for industrial applications requiring temperature tolerance from -40°C to 85°C. Ideal for surface mount designs needing a compact solution with gull wing terminals and shrink pitch style.
ISO1640BDR
ISO1640BDR by Texas Instruments is an 8-terminal interface IC with a supply voltage range of 2.25V to 5.5V, suitable for automotive applications. It features dual terminal position, GULL WING form, and operates in temperatures from -40°C to 125°C. The small outline package measures 4.905mm x 3.895mm with a max seated height of 1.75mm, making it ideal for surface mount assembly processes at peak reflow temperature of 260°C for up to 30 seconds.
ISO7720FD
ISO7720FD by Texas Instruments is a dual-function interface IC with 2 channels, operating b/w -55 to 125°C. It features a small outline package style, Gull Wing terminal form, and CMOS technology. Ideal for military-grade applications requiring a supply voltage range of 2.25-5.5V in surface-mount designs.
ADUM1402ARWZ
ADUM1402ARWZ by Analog Devices is a 16-terminal interface IC with 4 functions. It operates b/w -40 to 105°C, supporting EIA-232, EIA-422, and EIA-485 standards. This CMOS technology device in a small outline package is ideal for industrial applications requiring reliable signal interfacing at supply voltages ranging from 2.7V to 5.5V.
ADUM2400BRWZ
ADUM2400BRWZ by Analog Devices is a small outline interface IC with 16 terminals. It operates b/w -40 to 105°C, suitable for industrial applications. With a supply voltage range of 2.7-5.5V, it features CMOS technology and matte tin terminal finish for robust performance.
CY8CMBR3110-SX2IT
Cypress Semiconductor
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
ISO7741FDWR
ISO7741FDWR by Texas Instruments is a CMOS interface IC with 4 channels. It operates b/w -55 to 125 °C and has a supply voltage range of 2.25-5.5 V, making it suitable for military-grade applications requiring small outline packaging and surface mount technology.
ADUM5402ARWZ-RL
ADUM5402ARWZ-RL by Analog Devices is a 16-terminal interface IC with a supply voltage range of 3V to 5.5V, operating temperature from -40°C to 105°C. It is designed for industrial applications requiring small outline package style and dual terminal position for surface mount assembly.
ADUM1201BRZ-RL7
ADUM1201BRZ-RL7 by Analog Devices is a dual-function interface IC with 2 functions, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 105°C. It is designed for applications requiring small outline package style and surface mount technology, suitable for various interface circuit requirements in electronic systems.
ISO7641FMDWR
ISO7641FMDWR by Texas Instruments is a 4-channel interface IC with a supply voltage range of 2.7V to 5V, ideal for automotive applications. It features a small outline package style, dual terminal position, and nickel palladium gold finish. Operating temperatures range from -40°C to 125°C, making it suitable for various industrial environments.
SI8662BD-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Technology: CMOS;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI8641BB-B-IS1R
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 5 V;
SI8641BB-B-IS1R by Silicon Labs is a 16-terminal digital isolator with 4 functions. It operates b/w -40 to 125°C, with supply voltage ranging from 2.375V to 5.5V. Ideal for applications requiring small outline packages and surface mount technology.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE;
SI8642ED-B-IS
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G16;
SI8621BB-B-ISR
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP8,.25;
SI8621BB-B-IS
INTERFACE CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
SI8621AB-B-ISR
SI8621AB-B-ISR by Silicon Labs is a digital isolator with 8 terminals, operating voltage range of 2.5V to 5.5V, and AEC-Q100 screening for automotive applications. It features CMOS technology, GULL WING terminal form, and small outline package style suitable for surface mount assembly in various electronic systems. With an extended temperature range from -40°C to 125°C, it offers reliable isolation in harsh environments.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Minimum Supply Voltage: 2.5 V;
SI8620BB-B-ISR
SI8641BD-B-ISR
SI8641BD-B-ISR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and dual terminal position. It is used in applications requiring small outline package style, CMOS technology, and temperature range from -40°C to 125°C.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 4;
SI8631BD-B-IS
SI8631BD-B-IS by Silicon Labs is a 16-terminal digital isolator with 2.5-5.5V supply voltage range, AEC-Q100 screening for automotive applications, and -40 to 125°C operating temperature. It features a small outline package style, CMOS technology, and gull wing terminal form suitable for various interface applications.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
SI8641BA-B-IUR
SI8641BA-B-IUR by Silicon Labs is a digital isolator with 4 functions, operating voltage range of 2.375V to 5.5V, and temperature range from -40°C to 125°C. It comes in a small outline package suitable for various applications requiring interface isolation and signal transmission in electronic systems.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260;
SI8641BA-B-IU
SI8641BA-B-IU by Silicon Labs is a digital isolator with 4 functions, operating at -40 to 125 °C. It has a supply voltage range of 2.375V to 5.5V and comes in a small outline package suitable for surface mount applications. Ideal for systems requiring high-speed signal isolation in compact spaces.
DIGITAL ISOLATOR; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SSOP16,.25;
SI8661BB-B-IS1
Silicon Labs SI8661BB-B-IS1 is a 16-terminal digital isolator with 2.375V to 5.5V supply range, AEC-Q100 screening for automotive applications, and -40°C to 125°C operating temperature. It features CMOS technology, GULL WING terminals, and small outline package ideal for various function interface ICs.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved