Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CLASS D AUDIO AMPLIFIER; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 2A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Microchip USA
$26.325
Corphita
Audio & Video Amplifiers SI8241CB-D-IS1R attributes and parameters. Explore more Audio & Video Amplifiers devices from Silicon Labs
General IC Type:
Moisture Sensitivity Level (MSL):
Peak Reflow Temperature (C):
Maximum Time At Peak Reflow Temperature (s):
SI8241CB-D-IS1R General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
PCN Assembly/Origin - Si82xx/Si84xx/Si86xx 04/Feb/2020
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N7002
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
BAV99
Kec
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
THAT1512S08-U
That
THAT1512S08-U by That is an audio preamplifier with +-5V power supplies, 8mA max supply current, and industrial temperature grade. It features a small outline package shape suitable for surface mount applications in audio and video amplifiers.
NJM2073M-(T1)
New Japan Radio
NJM2073M-(T1) by New Japan Radio is an audio amplifier IC with 2 channels, 44 dB gain, and 0.5 W output power. It operates in industrial temperature range (-40 to 85 °C) and has low harmonic distortion (1%). Suitable for audio applications requiring small outline package style and surface mount technology.
TAS5766MDCAR
TAS5766MDCAR by Texas Instruments is a 48-terminal audio amplifier with 50W output power, 20dB gain, and 106dB noise figure. Ideal for applications requiring high-quality audio amplification in compact spaces. Operates b/w -25 to 85°C temperature range with a supply voltage of 4.5V to 26.4V.
STA540
STMicroelectronics
STA540 by STMicroelectronics is a Class AB audio amplifier with 4 channels and 34W nominal output power. It operates b/w 0-70°C, with harmonic distortion of 10%. Suitable for audio & video applications, it has a max supply voltage of 22V and min operating temperature of 0°C.
PAM8406ER
AUDIO AMPLIFIER; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30;
MAX9736AETJ/V+T
Analog Devices
CLASS D AUDIO AMPLIFIER; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
TDA8954TH
NXP Semiconductors
NXP Semiconductors' TDA8954TH is a 235W audio amplifier with 2 channels, 30dB gain, and 10% harmonic distortion. It operates in industrial temperature range (-40 to 85°C) and requires a supply voltage of 12.5-42.5V. Ideal for audio & video applications due to its small outline package and high output power capabilities.
MAX98357BEWL+T
Analog Devices' MAX98357BEWL+T is a Class D audio amplifier with 5V power supply, 9 terminals, and 3mA max supply current. Its industrial-grade design suits audio and video applications, featuring a plastic/epoxy package body in a square shape for surface mounting.
LM49350RLX/NOPB
National Semiconductor
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 36; Package Code: FBGA; Package Shape: SQUARE;
LM4880M
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SSM2211SZ
Analog Devices' SSM2211SZ is a Class D audio amplifier with 0.2% harmonic distortion, ideal for industrial applications. Operating b/w -40 to 85°C, it offers 1.5W output power at 2.7-5V supplies in a small outline package with surface mount capability.
TPA0211DGNG4
TPA0211DGNG4 by Texas Instruments is an audio amplifier IC with 2W output power, 1% harmonic distortion, and 93dB noise figure. It operates in industrial temperature range (-40 to 85°C) and requires a supply voltage of 2.5-5.5V. Ideal for audio applications requiring small outline package with surface mount capability.
TPA6120A2DWPR
TPA6120A2DWPR by Texas Instruments is an audio amplifier IC with 2 channels, offering a nominal output power of 1.5W. It operates on +-5/+-15V power supplies and has a nominal bandwidth of 0.022kHz. This industrial-grade amplifier is suitable for various audio and video applications due to its compact size and high performance capabilities.
MAX97220EETE+T
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: SQUARE;
TPA6110A2DGNR
TPA6110A2DGNR by Texas Instruments is an audio amplifier IC with 2 channels, 0.15W output power, and 0.1% harmonic distortion. It operates b/w -40 to 85°C, requires 2.5-5.5V supply voltage, and has a small outline package suitable for industrial applications like portable audio devices.
TDA8563QU
TDA8563QU by NXP Semiconductors is a 2-channel audio amplifier with a nominal output power of 55W and harmonic distortion of 30%. It operates in an industrial temperature range from -40 to 85°C, making it suitable for various audio applications. The package style is in-line with a rectangular shape and terminal form through-hole.
TPA3106D1VFPRG4
TPA3106D1VFPRG4 by Texas Instruments is a 40W audio amplifier with a package style of flatpack, heat sink/slug, low profile. It operates at a temperature range of -40 to 85°C and has a max supply voltage of 26V. This amplifier is commonly used in audio and video applications.
TAS3251DKQR
TAS3251DKQR by Texas Instruments is a Class D audio amplifier with 175W output power. It has 2 channels, operates b/w 0-70°C, and supports surface mount installation. Ideal for audio and video applications requiring high-quality sound amplification in compact spaces.
LMH6612MAX/NOPB
LMH6612MAX/NOPB by Texas Instruments is a video amplifier IC with 2 channels, operating temperature range of -40 to 125°C. It has a nominal bandwidth of 365 kHz and supports supply voltage from 2.7V to 11V. This small outline package is ideal for automotive applications requiring high-quality audio and video amplification in compact designs.
TDA1521Q
NXP Semiconductors' TDA1521Q is a 2-channel audio amplifier with 12W output power and 30dB gain. It operates b/w -25 to 100°C, with 0.5% harmonic distortion. Ideal for audio applications requiring high-quality amplification in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved