Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINEAR POSITION SENSOR, HALL EFFECT; Operating Frequency: 400 Hz;
Median Price
$0.991
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Nova Conductors
$0.850
Vyrian
Digiode
Aranea Global
$0.833
$0.800
Argo Parts USA
Continental Prestige Electronics
Ampacity Inc.
$1.560
Corphita
Linear Position Sensors SI7210-B-02-IVR attributes and parameters. Explore more Linear Position Sensors devices from Silicon Labs
Operating Frequency:
Sensors or Transducers Type:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
1552200253
Molex
WIRE AND CABLE;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E3Z-D62K-M3J0.3M
Omron
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 30 mA; Body Width: 10.8 inch; Minimum Supply Voltage: 12 V;
SS461A-SP
Honeywell Sensing And Control
LINEAR POSITION SENSOR, HALL EFFECT; JESD-609 Code: e1; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
OPB700Z
Optek Technology
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: THROUGH HOLE MOUNT; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 0.10-2.50mA; Maximum Output Voltage: 24 V;
FHDK10P5101
Baumer Electric Ag
Baumer Electric Ag's FHDK10P5101 is a 10.4" linear position sensor with 30V max supply voltage, suitable for applications requiring precise measurements within a range of 20-120mm. Featuring an output range of 100mA and response time of 1000us, this photoelectric sensor operates b/w -25 to 65°C, making it ideal for industrial automation systems.
OHDK10P5101/S35A
Baumer Electric Ag's linear position sensor OHDK10P5101/S35A has a 30V max supply voltage, 10.4" body width, and 27mm body height. Ideal for applications requiring precise analog current output over a measurement range of 22-130mm with quick response time of 250us. Suitable for board mounting in various industrial settings.
E3FC-TN21
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM; Output Type: NPN; Package Shape or Style: CYLINDRICAL; Housing: STAINLESS STEEL; Additional Features: IP67, IP68, IP69K; Termination Type: CONNECTOR;
EX-11SB
Panasonic
The Panasonic EX-11SB is a linear position sensor with a max supply voltage of 26.4V and response time of 500us. It is ideal for applications requiring precise positioning control in industrial automation systems due to its high repeatability of 0.05 and through beam photoelectric sensor type.
E3ZM-CL64H-M1TJ0.3M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE;
E2EM-X2B1
LINEAR POSITION SENSOR,PHOTOELECTRIC,THROUGH BEAM;
E3AS-F1500IPT-M3J0.3M
LINEAR POSITION SENSOR,PHOTOELECTRIC,TOF,VCSEL; Output Type: PNP, NC/NO; Package Shape or Style: RECTANGULAR; Additional Features: IP67, IP67G, IP69K, REVERSE POLARITY PROTECTION, SHORT CIRCUIT PROTECTION; Minimum Measurement Range (mm): 50 mm; Body Length/Diameter: 22 mm;
EX-14A
Panasonic's EX-14A linear position sensor has a 25mm measurement range, 500us response time, and operates b/w -25 to 55°C. Ideal for applications requiring precise distance measurements in industrial settings.
E3JM-DS70M4-G
Omron's E3JM-DS70M4-G is a linear position sensor with a max measurement range of 700mm. It operates b/w -25°C to 55°C, featuring a response time of 30000us. Ideal for board mounting applications, it has a relay output type and uses photoelectric technology for diffuse sensing.
E3FB-RP21-F2
LINEAR POSITION SENSOR,PHOTOELECTRIC,RETROREFLECTIVE; Mounting Feature: BOARD MOUNT; Output Type: PNP; Package Shape or Style: CYLINDRICAL; Termination Type: CONNECTOR; Maximum Operating Temperature: 55 Cel;
E3FA-VN112M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Output Type: NPN; Package Shape or Style: CYLINDRICAL; Termination Type: WIRE; Housing: PLASTIC; Minimum Measurement Range (mm): 10 mm;
ZS-LD20T2M
LINEAR POSITION SENSOR,PHOTOELECTRIC,DIFFUSE; Mounting Feature: BOARD MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 35 inch; Minimum Operating Temperature: 0 Cel; Body Length/Diameter: 65 mm;
A1392SEHLT-T
Allegro MicroSystems
LINEAR POSITION SENSOR, HALL EFFECT; Power Supplies (V): 2.5/3.3; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
SPI6101
SPI6101 by Onsemi is a Linear Position Sensor with 2 channels, Amplifier output circuit. It operates b/w -10 °C to 60°C, with max current of 300mA. Ideal for THROUGH HOLE MOUNT applications due to its 0.0057mm gap size.
SS461A-R
SS461A-R by Honeywell is a linear position sensor with 3.8-30V power supply, 1.57" width, and -40 to 150°C operating temperature range. Ideal for applications requiring digital current output, it features a response time of 0.05us and through-hole mounting capability.
EE-SY169
Omron's EE-SY169 is a linear position sensor with 0.16-2mA analog current output, suitable for applications requiring precise measurements within a 4mm range. With a compact body size of 6"x8mm, it operates b/w 0-70°C and draws a max current of 20mA.
HOA1180-003
HOA1180-003 by Honeywell is a linear position sensor with Darlington output circuit. It operates b/w -55°C to 100°C, with response time of 75 us. Featuring max VCEsat of 1.1V, it has a max output voltage of 15V and operating current of 50mA. Ideal for applications requiring precise position sensing in various industries.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI7201-B-00-FVR
Silicon Labs
LINEAR POSITION SENSOR, HALL EFFECT;
SI7201-B-06-IV
LINEAR POSITION SENSOR, HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3;
SI7210-B-00-IVR
SI7201-B-04-IVR
SI7201-B-04-IV
LINEAR POSITION SENSOR, HALL EFFECT; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
SI7201-B-09-IBR
SI7201-B-00-FV
SI7201-B-84-IV
SI7210-B-15-IM2
SI7201-B-84-IVR
SI7210-B-02-IV
SI7201-B-20-IV
SI7201-B-30-IV
SI7202-B-01-IVR
SI7206-B-00-IV
SI7210-B-04-IV
LINEAR POSITION SENSOR, HALL EFFECT; Operating Frequency: 400 Hz; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn);
SI7210-B-04-IVR
LINEAR POSITION SENSOR, HALL EFFECT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Operating Frequency: 400 Hz;
SI7201-B-01-FVR
SI7201-B-09-IB
SI7210-B-05-IV
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved