Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SI5392D-A10657-GM by Silicon Labs is a clock generator with 350 MHz output frequency, suitable for applications requiring precise timing. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.89 V. With a small outline package style and quad terminal position, it offers high performance in compact designs.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Nova Conductors
Ampacity Inc.
$9.000
AZTECH Wire
$11.441
Semicontronic
$32.000
$31.200
$31.040
Microchip USA
$47.813
Corohmni
$51.599
Aztec Data Supply Inc.
$69.840
Continental Prestige Electronics
Argo Parts USA
Corphita
Bastille Electronics
Ease of installation and space-saving design for compact applications.
Allows for efficient power usage without risking damage to the device.
Uniform design for easy integration into circuit boards.
High-frequency output for demanding applications requiring precise timing.
Sufficient terminals for connecting to various components in a system.
Operational in extreme cold conditions, making it versatile for different environments.
CMOS technology offers low power consumption and high noise immunity, enhancing overall performance.
High-frequency capability for demanding applications that require precise clocking.
Clock Generators SI5392D-A10657-GM attributes and parameters. Explore more Clock Generators devices from Silicon Labs
JESD-30 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Clock Frequency:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Nominal Primary Clock/Crystal Frequency:
Maximum Seated Height:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
SI5392D-A10657-GM Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Other - Ref Man 17/Mar/2020
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Vishay Telefunken
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Kec
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
First Components International
Shandong Yiguang Electronic Joint Stock
Continental Device India
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Non Repetitive Peak Forward Current: 40 A; Technology: SCHOTTKY; No. of Elements: 1;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
5P49V5935B520LTGI8
Integrated Device Technology
CLOCK GENERATOR, PCIe; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HLFLGA; Package Shape: SQUARE; Technology: CMOS;
SI5395J-A-GMR
Silicon Labs
CLOCK GENERATOR, PROCESSOR SPECIFIC; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40; Terminal Finish: NICKEL GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
CY22393FXCT
Cypress Semiconductor
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
EL4585CSZ-T13
Intersil
CLOCK GENERATOR, VIDEO; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
9FGV0241AKILFT
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ASM3P2775AF-06OR
Pulsecore Semiconductor
CLOCK GENERATOR, OTHER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
8T49N241-999NLGI8
Renesas Electronics
The Renesas Electronics clock generator 8T49N241-999NLGI8 operates at a max output frequency of 1000 MHz with a supply voltage range of 2.375V to 2.625V. This chip carrier package is suitable for industrial applications requiring precise timing and clock generation up to 50 MHz, featuring a compact square shape with surface mount capability.
CDCM6208V1RGZT
Texas Instruments
CDCM6208V1RGZT clock generator by Texas Instruments operates at a max frequency of 800 MHz with a supply voltage range of 1.71-3.465 V. It is ideal for industrial applications requiring precise timing, featuring a compact square package and quad terminal position for easy integration in electronic systems. The CMOS technology and nickel palladium gold finish ensure reliable performance in various environments.
SI5338C-B04171-GMR
SI5338C-B04171-GMR by Silicon Labs is a clock generator with 200 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.98 V. With a compact square package style and quad terminal position, it offers versatile integration options.
PL620-30DC
PL620-30DC by Microchip Tech is a clock generator with 130 MHz output frequency, suitable for various applications. It operates at supply voltages ranging from 2.25V to 3.63V and features a compact rectangular package style for surface mount assembly. With 31 terminals and CMOS technology, it offers precise timing solutions in a small form factor.
EL4585CSZ
EL4585CSZ by Renesas Electronics is a Clock Generator with 35.468 MHz output frequency, suitable for industrial applications. It operates at -40 to 85°C, consumes 4mA at 5V supply voltage, and features CMOS technology. With a compact rectangular package style and surface mount capability, it's ideal for video peripheral ICs.
ICS307GI-03LF
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
5V41066PGGI8
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
8T49N008A-000NLGI
Renesas Electronics 8T49N008A-000NLGI clock generator operates at a max output frequency of 2500 MHz with supply voltages of 2.5/3.3 V. Ideal for industrial applications, this CMOS technology chip carrier has 40 terminals and quad position, suitable for high-performance systems requiring precise timing control.
SI5391B-A-GMR
SI5391B-A-GMR by Silicon Labs is a clock generator with 350 MHz output frequency, 64 terminals, and 1.71-1.89 V supply voltage range. It is used in applications requiring precise timing such as networking equipment and communication systems.
SI5338C-B-GM
Skyworks Solutions
SI52202-A02BGMR
SI52202-A02BGMR by Silicon Labs is a clock generator with 100 MHz output frequency, suitable for PCIe applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.425V to 1.575V. This surface-mount device features a square package style with 20 terminals in a quad position.
ICS501MILF
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI5340A-D-GM
CLOCK GENERATOR, PROCESSOR SPECIFIC; Terminal Form: NO LEAD; No. of Terminals: 44; Package Code: HVQCCN; Package Shape: SQUARE; Nominal Supply Voltage: 1.8 V;
DSA612RL2A-01K9VAO
Microchip Technology's DSA612RL2A-01K9VAO clock generator operates at a max frequency of 100 MHz with supply voltage range of 1.71V to 3.63V. Ideal for applications requiring precise timing, such as automotive electronics due to AEC-Q100 screening and compact rectangular package measuring 2mm x 2.5mm in size.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SI5338A-B-GMR
SI5338A-B-GMR by Silicon Labs is a clock generator with 710 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C with a supply voltage range of 1.71-1.98 V. This CMOS technology chip has 24 terminals in a square package style, making it ideal for processor-specific peripherals.
SI5338A-B-GM
SI5338A-B-GM by Silicon Labs is a clock generator with 710 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.98 V. With a compact square package style and quad terminal position, it's ideal for processor-specific systems requiring precise timing control.
SI5338B-B-GMR
SI5338B-B-GMR by Silicon Labs is a clock generator with 350 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71-1.98 V. With a compact square package style and 24 terminals, it offers high performance in processor-specific systems.
SI5338C-B-GM clock generator by Silicon Labs operates at a max frequency of 200 MHz with a supply voltage range of 1.71-1.98 V. It is ideal for industrial applications requiring precise timing, featuring a compact square package and quad terminal position for easy integration in processor-specific systems.
SI5338B-B-GM
SI5338B-B-GM clock generator by Silicon Labs operates at a max frequency of 350 MHz with 24 terminals. It has a supply voltage range of 1.71V to 1.98V and is suitable for industrial applications requiring precise clock generation in compact spaces. This CMOS technology chip carrier supports quad terminal position with a low seated height of 0.9mm, making it ideal for processor-specific systems.
SI5338C-B-GMR
SI5338C-B-GMR clock generator by Silicon Labs operates at a max frequency of 200 MHz with 24 terminals. It has a supply voltage range of 1.71V to 1.98V and is suitable for industrial applications requiring precise clock generation in compact spaces. This CMOS technology-based chip carrier package features a very thin profile, making it ideal for processor-specific peripheral ICs.
SI5351A-B-GT
SI5351A-B-GT by Silicon Labs is a clock generator with max output freq of 160 MHz. It operates b/w -40 to 85 °C and has a supply voltage range of 2.25-2.75 V. Ideal for industrial applications requiring precise clock signals in compact form factor.
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
SI5341B-D-GM
SI5341B-D-GM by Silicon Labs is a clock generator with 350 MHz output frequency, 64 terminals, and 1.71-1.89 V supply voltage range. It is used in industrial applications requiring precise timing control and processor-specific clock generation.
CLOCK GENERATOR, PROCESSOR SPECIFIC; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE; Terminal Position: QUAD;
SI5345A-D-GM
SI5345A-D-GM by Silicon Labs is a clock generator with a max output clock frequency of 1028 MHz. It operates at a supply voltage range of 1.71 V to 1.89 V and has an industrial temperature grade of -40°C to 85°C. This chip carrier package is suitable for processor-specific applications requiring precise timing control.
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
SI5351A-B-GTR
SI5351A-B-GTR clock generator by Silicon Labs operates at max 160 MHz output frequency, with 10 terminals in a small outline package. Ideal for industrial applications requiring precise clock generation up to 85°C, this CMOS technology device supports a primary frequency of 27 MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved