Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs EFM8BB21F16G-C-QFN20 is an 8-bit microcontroller with a max clock frequency of 50 MHz. It operates in industrial temperature range (-40 to 85 °C) and features Flash ROM programmability. With 16 I/O lines, it's suitable for applications requiring high-speed processing and precise control in compact designs.
Median Price
$1.290
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
$1.269
100+ parts
$0.858
1k+ parts
$0.680
10k+ parts
$0.639
DigiKey
$1.012
$0.791
$0.702
Mouser Electronics
$0.891
$0.762
$0.701
Verical
-
Flip Electronics (Authorized)
Digiode
$1.586
Chip Stock
Vyrian
Flip Electronics
Nova Conductors
Semicontronic
$0.850
$0.829
$0.824
Ampacity Inc.
Corphita
$1.503
Continental Prestige Electronics
$1.600
$0.981
$0.689
Microchip USA
$11.050
Aztec Data Supply Inc.
$14.760
Corohmni
$42.089
Advanced Electronics
$46.720
$42.515
$38.310
Authorized Procurement Solutions
Perfect Parts
Argo Parts USA
Bastille Electronics
Surface mount technology allows for easy and efficient assembly onto printed circuit boards, saving time and reducing the overall size of the final product.
With a maximum supply voltage of 3.6V, this microcontroller can operate efficiently with a wide range of power sources, providing flexibility in various applications.
The square package shape allows for easy integration into space-constrained designs, making it ideal for compact electronic devices.
The 8-bit architecture of this microcontroller offers a good balance between performance and cost, suitable for a wide range of applications.
The presence of Analog-to-Digital Converter (ADC) channels enables the microcontroller to read analog signals, making it versatile for sensor interfacing and data acquisition applications.
With a maximum clock frequency of 50 MHz, this microcontroller can handle high-speed operations and real-time processing tasks efficiently.
The flash programmable ROM allows for easy and quick reprogramming of the microcontroller, making it suitable for applications that require frequent updates or changes in firmware.
Microcontrollers EFM8BB21F16G-C-QFN20 attributes and parameters. Explore more Microcontrollers devices from Silicon Labs
ADC Channels:
Address Bus Width:
Bit Size:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
JESD-30 Code:
Length:
No. of I/O Lines:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
ROM Programmability:
Maximum Seated Height:
Speed:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
EFM8BB21F16G-C-QFN20 Peripheral ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - EFM8 BB1/BB2 24/May/2017
PCN Assembly/Origin - Site Change 18/Jan/2022
PCN Packaging - IC/SIP MOQ Chg 11/Jan/2022 Labeling Change 14/Dec/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Gec Plessey Semiconductors
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
4554
Jw Miller Magnetics
Other Semiconductors;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Tak Cheong Electronics Holdings
STM32F730R8T6
STMicroelectronics
STM32F730R8T6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 282624 bytes of RAM and 65536 ROM words. It features 16 ADC channels, 2 DAC channels, and 14 timers suitable for industrial applications requiring low power mode and max clock frequency of 26 MHz.
STM32F407VGT6J
STM32F407VGT6J by STMicroelectronics is a 32-bit microcontroller with 82 I/O lines, 3.6V max supply voltage, and 26MHz clock frequency. Ideal for applications requiring ADC and PWM channels, DMA support, and a compact square package style with gull wing terminals.
TM4C123GH6PZI
Texas Instruments
TM4C123GH6PZI by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It operates at a max clock frequency of 25 MHz and has 69 I/O lines. Suitable for industrial applications, it features 32768 bytes of RAM, FLASH ROM programmability, and ADC/DMA channels for efficient data processing.
ATMEGA32U4-MU
Microchip Technology
ATMEGA32U4-MU by Microchip: 8-bit RISC CPU, 5.5V max supply, 16MHz clock freq. Ideal for industrial applications with SPI, TWI, USART, USB connectivity and low power mode. Contains 12-Ch ADCs, 10-Bit PWM channels, and Flash ROM programmability for versatile microcontroller tasks.
STM32F207VGT6
STM32F207VGT6 by STMicroelectronics is a 32-bit microcontroller with a max supply voltage of 3.6V. It features 2 DAC channels, 16 ADC channels, and 17 timers. This microcontroller is commonly used in industrial applications due to its temperature grade and connectivity options such as CAN, Ethernet, I2C, SPI, UART, USART, and USB.
ATSAM3X8EA-AU
Microchip ATSAM3X8EA-AU is a 32-bit microcontroller with Cortex-M3 CPU, 144 terminals, and 20 MHz clock frequency. Ideal for industrial applications, it features DAC and ADC channels, 98304 bytes of RAM, and flash ROM programmability.
STM32F407ZGT6TR
STM32F407ZGT6TR by STMicroelectronics is a 32-bit microcontroller with a max clock frequency of 26 MHz. It features 144 terminals, ADC and DAC channels, and 16 external interrupts. This microcontroller is commonly used in industrial applications due to its low power mode and temperature grade of INDUSTRIAL.
STM32H743VGT6
STM32H743VGT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU family. It features 2-Ch 12-Bit DAC, 16-Ch 16-Bit ADC, and 21 timers for industrial applications. With a max clock frequency of 48 MHz, it offers low power mode and connectivity options like CAN, I2C, USB, and UART.
ATSAME70N21A-AN
Microchip's ATSAME70N21A-AN is a 32-bit microcontroller with Cortex-M7 CPU, offering 2 DAC and 10 ADC channels. It features 24 DMA channels, 12 timers, and peripherals like CAN, I2S, SPI, UART, USART, USB for industrial applications. With a clock frequency of up to 20 MHz and low power mode support, it provides high-speed processing capabilities in a compact form factor.
STM32F437VGT6
STM32F437VGT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4F CPU, 262144 bytes RAM, and 1048576 ROM words. It features 16-Ch 12-Bit ADC, 2-Ch 12-Bit DAC, and peripherals like BOD, DMA(2), RTC. Ideal for industrial applications requiring high-speed processing up to 50 MHz and extensive connectivity options including CAN(2), ETHERNET, USB.
ATMEGA328P-ANR
ATMEGA328P-ANR by Microchip: 8-bit RISC CPU, 20 MHz clock, 2/5 V supply. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Contains 2048 RAM bytes, FLASH ROM programmability, and 8-Ch 10-Bit ADC channels for versatile microcontroller tasks.
ATMEGA128L-8AU
ATMEGA128L-8AU by Microchip: 16-bit address bus, 8-bit data RAM, 65536 ROM words. Ideal for industrial applications requiring low power consumption and connectivity with SPI and USART interfaces.
ATMEGA328P-PU
ATMEGA328P-PU by Microchip: 8-bit RISC CPU, 20 MHz clock, 2/5 V supply. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Contains 6-Ch ADC, 1024 EEPROM size, and peripherals like BOD and PWM(6).
ATMEGA328PB-AN
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
STM32F411CEU6TR
STM32F411CEU6TR by STMicroelectronics is a 32-bit microcontroller with Cortex-M4 CPU, offering 36 I/O lines and 10-Ch 12-Bit ADC channels. Operating at up to 26 MHz, it features low power mode and peripherals like USB, SPI, and USART. Ideal for industrial applications requiring high-speed processing and connectivity in a compact form factor.
ATSAMD21G18A-AFT
MICROCONTROLLER, RISC; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
AT91SAM7X256C-AU
AT91SAM7X256C-AU by Microchip Technology is a 32-bit ARM7 microcontroller with 262144 ROM words and 65536 RAM bytes. It operates at a max clock frequency of 50 MHz, suitable for industrial applications requiring high-speed processing and features like ADC and DMA channels for efficient data handling. With a wide temperature range from -40 to 85 °C, it's ideal for various embedded systems needing reliable performance in harsh environments.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 28; Package Code: DIP; Package Shape: RECTANGULAR;
STM32F427IIT6
STM32F427IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 50 MHz. It features 24-Ch 12-Bit ADCs and DACs, suitable for industrial applications requiring high-speed processing and connectivity via CAN, Ethernet, I2C, SPI, UART, USB interfaces.
PIC32MX795F512L-80V/PT
PIC32MX795F512L-80V/PT by Microchip: 32-bit RISC microcontroller with 536576 ROM words, 131072 RAM bytes, and 16-Ch 10-Bit ADC. Ideal for industrial applications requiring Ethernet, I2C(5), SPI(4), UART(6), USB connectivity at a max clock frequency of 50 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
EFM8UB20F32G-A-QFP32
Silicon Labs
MICROCONTROLLER; Technology: CMOS;
EFM8BB10F2G-A-QFN20
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: SQUARE;
EFM8BB21F16G-C-QFN20R
Silicon Labs EFM8BB21F16G-C-QFN20R is an 8-bit microcontroller with a max clock frequency of 50 MHz. It features 16 I/O lines, PWM channels, and ADC channels. Ideal for industrial applications requiring a temperature range from -40 to 85°C, this chip carrier package has a very thin profile and no-lead terminal form.
EFM8UB11F16G-B-QSOP24
EFM8BB10F8G-A-QFN20
EFM8BB10F8G-A-QFN20 by Silicon Labs is an 8-bit microcontroller with a max clock frequency of 25 MHz. It has 512 bytes of RAM and 8192 ROM words, making it suitable for industrial applications. With I2C, SPI, and UART connectivity options, it offers versatile communication capabilities.
EFM8UB20F64G-A-QFP32
EFM8SB20F64G-A-QFP32
EFM8UB10F16G-B-QFN28
EFM8BB10F8G-A-QFN20R
Silicon Labs EFM8BB10F8G-A-QFN20R is an 8051 microcontroller with 8-bit ROM and RAM, operating at up to 25 MHz. It features 15-Ch 12-Bit ADC channels, PWM support, and connectivity via I2C, SPI, UART. Ideal for low power applications requiring high-speed processing in automotive electronics and industrial control systems.
EFM8BB52F16G-C-TSSOP20
MICROCONTROLLER, RISC;
EFM8SB10F2G-A-QFN20R
EFM8SB10F2G-A-QFN20
EFM8BB31F32G-A-QFP32
EFM8UB20F32G-A-QFP48
EFM8BB31F64G-D-QFN32
MICROCONTROLLER; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 2; JESD-609 Code: e3;
EFM8UB10F16G-B-QFN20
EFM8BB10F2G-A-QFN20R
Silicon Labs EFM8BB10F2G-A-QFN20R is an 8051 microcontroller with 8-bit ROM and 256 bytes RAM. It operates at a max frequency of 25 MHz, featuring 15-Ch 12-Bit ADC channels for applications requiring low power mode and PWM control. Connectivity options include I2C, SPI, and UART interfaces for versatile usage in automotive electronics and industrial automation.
EFM8BB10F8G-A-SOIC16R
Silicon Labs EFM8BB10F8G-A-SOIC16R is an 8051 microcontroller with 25 MHz clock, 512B RAM, and 12-Ch 12-Bit ADC. Ideal for applications requiring low power mode, it offers connectivity via I2C, SPI, UART interfaces. With a small outline package style and max supply voltage of 3.6V, it suits various embedded systems designs.
EFM8BB52F32I-C-QFN32
EFM8BB21F16G-B-QFN20R
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved