Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
XO Clock Oscillators 570FBC000111DGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Maximum Output Low Current:
Package Equivalence Code:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FO7HHAAM4.096-T1
Fox Electronics
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 4.096 MHz;
DSC1001AL5-040.0000
Microchip Technology
DSC1001AL5-040.0000 by Microchip Technology is a 40 MHz XO Clock Oscillator with 10% frequency stability, suitable for AEC-Q100 applications. It operates at a nominal voltage of 3.3V and has a max rise time of 2ms. This CMOS oscillator comes in a compact 7.0mm x 5.0mm x 0.9mm package ideal for surface mounting features.
SG-210STF24.0000ML3
Seiko Epson
CMOS; JESD-609 Code: e4; Terminal Finish: GOLD;
ECS-3953M-400-AU-TR
Ecs International
ECS-3953M-400-AU-TR by Ecs International is a ceramic XO Clock Oscillator with 40MHz nominal frequency, 100% stability, and 200MHz max operating frequency. Ideal for applications requiring precise timing in a compact surface-mount package.
DSC1001DI5-025.0000T
DSC1001DI5-025.0000T by Microchip Technology is a CMOS XO Clock Oscillator with 25 MHz frequency, 10% stability, and 3.3 V supply voltage. It has a compact size of 2.5mm x 2.0mm x 0.85mm and is ideal for applications requiring precise timing in temperature-sensitive environments.
540BAA150M000BAGR
Silicon Labs
Silicon Labs' 540BAA150M000BAGR is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 150 MHz. It has a max supply voltage of 3.465 V and MIL-STD-883 screening level. Ideal for applications requiring precise timing in environments with temperatures ranging from -40 to 85 °C.
ECX-L33BN-212.500
ECX-L33BN-212.500 by Ecs International is a LVDS XO Clock Oscillator with 212.5 MHz frequency, 50% stability, and 3.465 V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range and compact size of 3.2mm x 2.5mm x 0.9mm.
ASV-24.576MHZ-EJ-T
Abracon's ASV-24.576MHZ-EJ-T is a 24.576 MHz XO Clock Oscillator with 20% frequency stability, HCMOS/TTL type, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -20°C to 70°C.
514CBB000112BAG
514CBB000112BAG by Silicon Labs is a CMOS XO Clock Oscillator with 25% frequency stability, operating at frequencies up to 212.5 MHz. It has a max supply voltage of 3.63 V and output load of 15 pF, making it suitable for applications requiring precise timing in electronic devices.
SG-8018CG123.456789M-TJHPA0
SG-8018CG123.456789M-TJHPA0 by Seiko Epson is a CMOS XO Clock Oscillator with 123.456789 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in a compact form factor with surface mounting feature.
LTC6905CS5-96#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .5 ns;
ASDMPLV-200.000MHZ-LR-T
Abracon's ASDMPLV-200.000MHZ-LR-T is a 200MHz XO Clock Oscillator in a 2.5mm x 2.0mm x 0.85mm package, operating on CMOS technology with LVDS output. It has a wide temperature range from -40°C to 85°C and low supply current of 32mA, suitable for various applications requiring precise timing at high frequencies up to 460MHz.
LTC6991CDCB#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Additional Features: OUTPUT FREQUENCY 29.1 MICRO HZ TO 977 HZ; Terminal Finish: Matte Tin (Sn);
FXO-HC536R-24.576
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; TR, 7/10 INCH;
FXO-HC536R-16.384
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
AX3HCF1-100.0000
Abracon's AX3HCF1-100.0000 is a 100MHz HCSL XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 1.8V and has a compact size of 3.2mm x 2.5mm x 1.0mm, making it ideal for space-constrained designs in various electronic devices.
KC3225K25.0000C10E00
KYOCERA AVX
KC3225K25.0000C10E00 by KYOCERA AVX is a 25 MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15 pF output load. It operates b/w -10°C to 70°C, has a max supply voltage of 3.63 V, and requires only 5 mA max supply current. Ideal for applications requiring precise timing in compact electronic devices.
LTC6906IS6#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.75mm x 1.0mm; Additional Features: TAPE AND REEL;
SG-8018CB123.456789M-TJHPA0
SG-8018CB123.456789M-TJHPA0 by Seiko Epson is a CMOS XO Clock Oscillator with 123.456789 MHz frequency, 50% stability, and 15 pF output load. It operates b/w -40 to 105 °C, suitable for applications requiring precise timing in compact designs with surface mount capabilities.
530BC156M250DGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved