Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 2.75 V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
XO Clock Oscillators 570FAB000419DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Maximum Output Low Current:
Package Equivalence Code:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
BAV99
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
Diotec Electronics
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Transys Electronics
Diotec Semiconductor Ag
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Excel (Suzhou) Semiconductor
CB3-3C-20M0000
Cts
CB3-3C-20M0000 by Cts is a ceramic XO Clock Oscillator with 20 MHz frequency, HCMOS/TTL type, and 50% stability. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its high accuracy and low jitter performance.
SIT8208AI-21-XXX-000.FP0000X
Sitime
SIT8208AI-21-XXX-000.FP0000X by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 3.3V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS/LVTTL applications, it operates b/w -40 to 85 °C with a frequency range of 1MHz to 80MHz in a compact size of 3.2mm x 2.5mm x 0.75mm for surface mounting.
ASDMB-48.000MHZ-XY-T
Abracon
Abracon's ASDMB-48.000MHZ-XY-T is a 48 MHz XO Clock Oscillator with 10% frequency stability, 15 pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature range of -40 to 105°C. Suitable for surface mounting with compact dimensions of 2.5mm x 2.0mm x 0.85mm.
SIT9386AE-2B2-33E125.000000G
SIT9386AE-2B2-33E125.000000G by Sitime is a 125 MHz LVDS XO Clock Oscillator with 25% frequency stability, operating from -40°C to 105°C. It has a max supply voltage of 3.63V and output load of 100Ω, suitable for surface mount applications in various electronic devices requiring precise timing control.
LTC6908IS6-1#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e3; Minimum Operating Frequency: .05 MHz;
ASEMB-50.000MHZ-LC
ASEMB-50.000MHZ-LC by Abracon is a CMOS XO Clock Oscillator with a frequency range of 1 MHz to 150 MHz. It operates at a nominal voltage of 3.3 V and has a max supply current of 15 mA. This surface mount oscillator is commonly used in applications requiring precise timing and synchronization.
540BAA125M000BBGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LTC6908IS6-1#TR
Analog Devices
LTC6908IS6-1#TR by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. It operates b/w -40 to 85°C and has a frequency range of 0.05MHz to 10MHz. Ideal for applications requiring precise timing in compact designs.
510CCAM409600BAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Output Low Current: 8 Amp;
530BC156M250DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
SIT8208AI-31-XXX-000.FP0000X
SIT8208AI-31-XXX-000.FP0000X by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 20% Frequency Stability, 3.3V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS/LVTTL applications, it operates b/w -40 to 85 °C with a frequency range of 1MHz to 80MHz in a compact 5mm x 3.2mm x 0.75mm package.
SG-210STF12.0000ML0
Seiko Epson
CMOS; Terminal Finish: GOLD; JESD-609 Code: e4;
DSC1121CM2-040.0000
Microchip Technology
DSC1121CM2-040.0000 by Microchip Technology is a CMOS XO Clock Oscillator with a frequency stability of 25%. It operates at a nominal frequency of 40 MHz and has a max supply voltage of 3.6 V. This oscillator is commonly used in applications that require precise timing and synchronization, such as telecommunications equipment and industrial automation systems.
DSC1103CI5-300.0000
DSC1103CI5-300.0000 by Microchip Technology is a LVDS XO Clock Oscillator with 10% frequency stability, operating at 300 MHz. It has a supply voltage range of 2.25V to 3.6V and operates in temperatures from -40°C to 85°C. Ideal for applications requiring precise timing such as telecommunications and networking equipment due to its small form factor and high symmetry output.
DSC1123CE1-125.0000
DSC1123CE1-125.0000 by Microchip Technology is a 125 MHz LVDS XO Clock Oscillator with 50% frequency stability. It operates b/w -20°C to 70°C, has a supply voltage range of 2.25V to 3.6V, and consumes up to 22mA current. Ideal for applications requiring precise timing in compact electronic devices due to its small size and surface mount feature.
SG-8002CA55.2960M-PCML3
SG-8002CA55.2960M-PCML3 by Seiko Epson is a ceramic XO Clock Oscillator with 55.296 MHz frequency, 100% stability, and CMOS type. Ideal for applications requiring precise timing in a compact form factor, it operates at temperatures from -40 to 85 °C and has a low output current of 8 Amp.
LTC6906IS6
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45; Minimum Operating Temperature: -40 Cel;
DSC1001DI1-033.3333
DSC1001DI1-033.3333 by Microchip Technology is a 33.3333 MHz XO Clock Oscillator with 50% frequency stability, 10 KOHM output load, and 15 pF output load. It operates at a nominal voltage of 3.3 V and is ideal for applications requiring precise timing in electronic circuits.
SIT1602BI-32-28N-50.000000
SIT1602BI-32-28N-50.000000 by Sitime is a 50 MHz XO Clock Oscillator with LVCMOS/HCMOS type, MIL-STD-883F screening level, and 25% frequency stability. It operates b/w -40 to 85 °C and has a compact size of 5mm x 3.2mm x 0.85mm, making it suitable for various electronic applications requiring precise timing control in harsh environments.
CB3LV-3C-50M000000-T
CB3LV-3C-50M000000-T by Cts is a 50 MHz XO Clock Oscillator with 50% Frequency Stability, HCMOS/TTL type. Operating at 3.3V, it has a 30 pF output load and dimensions of 7.0mm x 5.0mm x 1.8mm. Ideal for applications requiring precise timing in electronic devices with surface mount requirements.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved