Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 545BAA156M250BAG is a LVDS XO Clock Oscillator with 20% frequency stability, operating at 156.25 MHz. It has a max supply voltage of 3.465 V and output load of 100 ohms. Ideal for applications requiring precise timing in temperature-sensitive environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Digiode
Nova Conductors
Ampacity Inc.
$5.010
AZTECH Wire
$20.140
Continental Prestige Electronics
Argo Parts USA
Corphita
Aranea Global
Offers a stable and reliable frequency output, ensuring accurate timekeeping in the clock oscillator.
Provides flexibility in power supply options and ensures compatibility with a wide range of systems.
Suitable for driving standard loads and ensures optimal performance in various applications.
Matches commonly used supply voltages in electronic devices, making it easy to integrate into existing systems.
Low Voltage Differential Signaling (LVDS) technology offers high-speed data transmission and noise immunity.
Provides necessary connections for power, ground, and signal connections, ensuring proper functionality.
Quick rise time ensures fast signal transitions and minimal signal distortion.
Compact size allows for easy integration into space-constrained designs while maintaining robust construction.
Can operate efficiently at lower supply voltages, conserving power and extending battery life in portable devices.
Wide operating temperature range allows for reliable performance in various environmental conditions.
Capable of functioning in extreme cold temperatures, making it suitable for diverse applications.
Provides a high-frequency output suitable for clocking applications requiring precise timing.
Quick fall time ensures smooth signal transitions and minimal signal delay.
High symmetry ensures balanced signal output for improved signal integrity and performance.
Surface-mount design simplifies PCB assembly and enables efficient mass production of electronic devices.
XO Clock Oscillators 545BAA156M250BAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
PCN Part Status Change - Si54 EOL 11/Apr/2019
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Asi Semiconductor
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LTC6908IS6-1#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF;
LTC6905IS5-133#TRMPBF
Analog Devices
LTC6905IS5-133#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 20% frequency stability, 5.5V max supply voltage, and 5pF output load. Ideal for applications requiring precise timing at 133MHz, such as telecommunications equipment and industrial automation systems.
511FBA100M000AAGR
Silicon Labs
LVDS; Qualification: Not Qualified; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; JESD-609 Code: e4; Power Supplies (V): 2.5;
510DCA100M000AAGR
HCSL; Power Supplies (V): 3.3; Qualification: Not Qualified; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
DSC1001DI2-025.0000T
DSC1001DI2-025.0000T by Microchip is a CMOS XO Clock Oscillator with 25 MHz frequency, 25% stability, and 3.3V supply voltage. Ideal for applications requiring precise timing in electronics, telecommunications, and industrial automation due to its compact size and high performance.
ASDMB-8.000MHZ-LY-T
Abracon
ASDMB-8.000MHZ-LY-T by Abracon is a 4-terminal CMOS XO Clock Oscillator with a frequency stability of 10%. It operates at a nominal frequency of 8 MHz and has a max operating temperature of 85°C. This surface mount oscillator is suitable for applications requiring precise timing in various electronic devices.
MX573NBB311M040-TR
MX573NBB311M040-TR by Microchip Technology is a LVDS XO Clock Oscillator with 311.04 MHz frequency, 50% stability, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -40°C to 85°C.
XLH536200.000000I
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
FXO-HC735-20.48
Fox Electronics
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
ASEMPC-24.000MHZ-LR-T
Abracon's ASEMPC-24.000MHZ-LR-T is a 24MHz XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating voltage range of 2.25V to 3.6V, low supply current of 35mA, and compact size of 3.2mm x 2.5mm x 0.85mm make it ideal for space-constrained designs in various electronic devices.
VCC1-B3D-50M0000000
Microsemi
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
DSC1101DL5-020.0000T
DSC1101DL5-020.0000T by Microchip: 20MHz XO Clock Oscillator with 10% stability, 3.6V max supply voltage, and 15pF output load. Ideal for CMOS applications in a wide temperature range from -40°C to 105°C.
AX7PAF3-125.0000C
Abracon's AX7PAF3-125.0000C is a 125 MHz LVPECL XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a nominal voltage of 3.3 V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively. This surface mount oscillator has a compact size of 7.0mm x 5.0mm x 1.8mm, making it ideal for space-constrained electronic devices.
DSC1121AM2-025.0000
DSC1121AM2-025.0000 by Microchip: XO Clock Oscillator with 25% Frequency Stability, 25 MHz Nominal Frequency, and CMOS Oscillator Type. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 0.9mm package for surface mounting feature.
SG-8002CA55.2960M-PCML3
Seiko Epson
SG-8002CA55.2960M-PCML3 by Seiko Epson is a ceramic XO Clock Oscillator with 55.296 MHz frequency, 100% stability, and CMOS type. Ideal for applications requiring precise timing in a compact form factor, it operates at temperatures from -40 to 85 °C and has a low output current of 8 Amp.
DSC1123CI5-125.0000
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 10 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
LTC6995CS6-1#PBF
LTC6995CS6-1#PBF by Analog Devices is a CMOS XO Clock Oscillator with 22000% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing in compact spaces due to its small physical dimensions of 2.9mm x 1.75mm x 1.0mm and surface mounting feature.
SIT8008BC-23-33N-2.097152E
Sitime
SIT8008BC-23-33N-2.097152E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 50% Frequency Stability, 3.63V Max Supply Voltage, and MIL-STD-883 Screening Level. Ideal for applications requiring LVCMOS/HCMOS oscillators in compact form factors like 3.2mm x 2.5mm x 0.8mm devices with a frequency of 2.097152 MHz.
XLH736050.022000I
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 50.022 MHz;
ECS-2100A-049
Ecs International
ECS-2100A-049 by Ecs International is a XO Clock Oscillator with 100% Frequency Stability, 5.25V Max Supply Voltage, and 4.9152 MHz Nominal Operating Frequency. Ideal for applications requiring precise timing in environments ranging from 0°C to 70°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
545BAA100M000BAGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
545BAA100M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.465 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 3.135 V;
545BAA312M500BBGR
Silicon Labs' 545BAA312M500BBGR is a 312.5 MHz LVDS XO Clock Oscillator with 20% frequency stability, suitable for applications requiring precise timing such as telecommunications and networking equipment. It operates at a max supply voltage of 3.465 V and has a compact size of 5.0mm x 3.2mm x 1.33mm for easy integration in space-constrained designs.
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
545BAA150M000ABGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Nickel/Gold (Ni/Au);
545BAA100M000BBGR
545BAA125M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .35 ns;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Output Load: 100 OHM;
545BAA25M0000BBG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION; 1.8V 2.5V SUPPLY VOLTAGE ALSO AVAILABLE; TAPE;
545BAA100M000BCG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 121 mA;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Screening Level: MIL-STD-883;
545BAA150M000BBG
545BAA250M000BAGR
LVDS;
545BAA156M250ACG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved