Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
534BA000190DG by Silicon Labs is a LVDS XO Clock Oscillator with 50% Frequency Stability, operating from 10 MHz to 945 MHz. It has MIL-STD-883 Screening Level and operates at temperatures ranging from -40°C to 85°C. Ideal for applications requiring precise timing in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
Digiode
Corohmni
$0.056
Ampacity Inc.
$2.010
AZTECH Wire
$18.643
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
Argo Parts USA
Corphita
Bastille Electronics
Provides a stable frequency output, ensuring accurate timekeeping and synchronization in clock applications.
Allows for a wide range of supply voltage inputs, making it versatile and compatible with different systems.
Meets stringent military standards for reliability and quality assurance, suitable for mission-critical applications.
Optimized output load for efficient signal transmission and performance in electronic circuits.
Low power consumption for enhanced energy efficiency and longer battery life in portable devices.
Standard voltage requirement for seamless integration with existing systems and components.
Low Voltage Differential Signaling technology for high-speed data transmission and noise immunity.
Provides multiple connection points for easy installation and secure electrical connections.
Fast rise time ensures quick response and precise timing in clock signal generation.
Compact size for space-constrained applications and easy PCB layout design.
Allows for operation in low voltage conditions without compromising performance or stability.
Wide temperature range for reliable operation in harsh environmental conditions.
Extended temperature range for operation in extreme cold conditions without performance degradation.
Provides corrosion resistance and ensures reliable electrical connections for long-term use.
Fast fall time for accurate signal transitions and stable clock output.
Balanced output waveform symmetry for consistent and reliable clock signal generation.
Supports a wide range of operating frequencies for versatile clock signal generation.
Surface mount design for easy and secure installation on PCBs, suitable for automated assembly processes.
High operating frequency for applications requiring fast and accurate clock signal generation.
XO Clock Oscillators 534BA000190DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Package Equivalence Code:
Physical Dimension:
Maximum Rise Time:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
534BA000190DG Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - LOGO 17-Jan-2022 Mult Devices 11/Jul/2018
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Central Semiconductor
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Multicomp Pro
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Comchip Technology
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
ASDMB-20.000MHZ-XY-T
Abracon
Abracon's ASDMB-20.000MHZ-XY-T is a 20MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature-sensitive environments. Dimensions of 2.5mm x 2.0mm x 0.85mm make it suitable for compact designs in various electronic devices.
LTC6905IS5-100#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e3;
ASE-8.000MHZ-L-C-T
Abracon's ASE-8.000MHZ-L-C-T is an 8MHz XO Clock Oscillator with 50% frequency stability, 3.465V max supply voltage, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and communication systems.
ASEM1-50.000MHZ-L-C-T
Abracon's ASEM1-50.000MHZ-L-C-T is a 50 MHz XO Clock Oscillator with 3.3V supply, CMOS type, and 10mA max current draw. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
LTC6908HS6-1#TRM
Analog Devices
LTC6908HS6-1#TRM by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication systems.
ASDMB-24.000MHZ-XY-T
Abracon's ASDMB-24.000MHZ-XY-T is a 24MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS type. Ideal for applications requiring precise timing in temperature range of -40°C to 105°C.
LTC6906HS6#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF; Maximum Symmetry (%): 55/45;
ASVMPC-20.000MHZ-Z-T
Abracon's ASVMPC-20.000MHZ-Z-T is a 20MHz XO Clock Oscillator with 50% frequency stability, MIL-STD-883 screening, and CMOS technology. Operating voltage range of 2.25V to 3.6V makes it suitable for various applications requiring precise timing in harsh environments. Its compact size of 7.0mm x 5.0mm x 0.85mm and surface mount feature enhance ease of integration in electronic devices.
AX7DAF1-106.2500C
Abracon's AX7DAF1-106.2500C is a 106.25 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a nominal voltage of 3.3 V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively, making it ideal for high-speed digital circuits in temperature-sensitive environments up to 85°C.
SIT9121AI-2C3-33E156.250000
Sitime
SIT9121AI-2C3-33E156.250000 by Sitime is a 156.25 MHz LVDS XO Clock Oscillator with a frequency stability of 50%. It has a max supply voltage of 3.63 V and is commonly used in applications such as telecommunications, networking, and industrial equipment.
DSC1001CI1-050.0000
DSC1001CI1-050.0000 by Microchip Tech is a 50MHz CMOS XO Clock Oscillator with 3.3V supply, 10KOHM load, and 15pF output. Ideal for applications requiring precise timing in a compact form factor, it operates b/w -40 to 85 °C and offers fast rise/fall times for efficient signal processing.
545ACA128M000ABG
Skyworks Solutions
The 545ACA128M000ABG by Skyworks Solutions is a XO Clock Oscillator with a frequency stability of 7%, a maximum supply voltage of 3.465 V, and an output load of 50 OHM. It operates at a nominal frequency of 128 MHz and has a LVPECL oscillator type. It also features a TRI-STATE, ENABLE/DISABLE function, complementary output, and surface mount mounting feature.
LTC6991IS6#PBF
LTC6991IS6#PBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 2.7ms rise time. Ideal for applications requiring precise timing control in compact designs with surface mounting feature.
FXO-HC536R-12.288
Renesas Electronics
Renesas Electronics' FXO-HC536R-12.288 is a 12.288 MHz HCMOS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V with a max supply voltage of 3.465 V and features a compact size of 5.15mm x 3.35mm x 1.4mm for surface mounting in various electronic devices.
SIT1602BI-32-28N-50.000000
SIT1602BI-32-28N-50.000000 by Sitime is a 50 MHz XO Clock Oscillator with LVCMOS/HCMOS type, MIL-STD-883F screening level, and 25% frequency stability. It operates b/w -40 to 85 °C and has a compact size of 5mm x 3.2mm x 0.85mm, making it suitable for various electronic applications requiring precise timing control in harsh environments.
DSC1123CE1-125.0000
Micrel
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 22 mA;
LTC6995IDCB-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
7XZ-32.768K-CE-T
Txc
7XZ-32.768K-CE-T by Txc is a ceramic XO Clock Oscillator with 50% frequency stability, operating at 0.032768 MHz. It has a max supply voltage of 2.75 V and output load of 15 pF, suitable for surface mount applications in various electronic devices.
534BA000190DGR
Silicon Labs
534BA000190DGR by Silicon Labs is a LVDS XO Clock Oscillator with 50% Frequency Stability, operating from 10 MHz to 945 MHz. It has MIL-STD-883 Screening Level and operates at temperatures ranging from -40°C to 85°C. Ideal for applications requiring precise timing in harsh environments.
AX7DBF1-400.0000C
Abracon's AX7DBF1-400.0000C XO Clock Oscillator operates at 400MHz with LVDS type, 25% frequency stability, and 2.75V max supply voltage. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 1.8mm surface mount package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
534BA000190DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 945 MHz;
534BA000345DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 98 mA;
534BB000555DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 945 MHz;
534BA000159DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 100 OHM;
534BA000159DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
534BA000346DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
534BA000440DGR
534BA000446DGR
534BA000477DGR
534BA000485DGR
534BA000595DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
534BA000159BGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
534BA000190BGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: .35 ns;
534BA000190BG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: LCC8,.2X.28,100;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved