Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
Median Price
$34.720
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$27.050
1k+ parts
-
10k+ parts
Digiode
$31.141
Vyrian
$32.780
Corphita
$29.502
QUARKTWIN TECHNOLOGY LTD
XO Clock Oscillators 531FC250M000DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Comset Semiconductors
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
ASV-12.000MHZ-EJ-T
Abracon
Abracon's ASV-12.000MHZ-EJ-T XO Clock Oscillator operates at 12MHz with 20% frequency stability, HCMOS/TTL type, and 3.3V nominal voltage. Ideal for applications requiring precise timing in a compact 7.0mm x 5.08mm x 1.8mm surface-mount package.
ASEMPC-10.000MHZ-LR-T
Abracon's ASEMPC-10.000MHZ-LR-T is a 10MHz CMOS XO Clock Oscillator with 6 terminals and operates at 2.5/3.3V. It has a compact size of 3.2mm x 2.5mm x 0.85mm, making it ideal for applications requiring precise timing in temperature-sensitive environments up to 85°C, such as IoT devices and communication systems.
532PC000553DG
Silicon Labs
532PC000553DG by Silicon Labs is a CMOS XO Clock Oscillator with 7% frequency stability, operating b/w -40°C to 85°C. It has a max supply voltage of 3.63V and operates at frequencies ranging from 10MHz to 160MHz. Ideal for applications requiring precise timing in harsh environments per MIL-STD-883 screening standards.
ECS-3225MV-250-CN-TR3
Ecs International
ECS-3225MV-250-CN-TR3 by Ecs International is a CMOS XO Clock Oscillator with 25MHz frequency, 25% stability, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor. Operating temperature range from -40°C to 85°C makes it suitable for various electronic devices.
570BAB000544DG
Silicon Labs' 570BAB000544DG is a LVDS XO Clock Oscillator with 50% Frequency Stability, operating at 10-1417.5 MHz. Ideal for applications requiring precise timing in electronics, it has a compact size of 7.0mm x 5.0mm x 1.8mm and operates within -40 to 85 °C temperature range.
ASE2-50.000MHZ-LC-T
Abracon's ASE2-50.000MHZ-LC-T is a 50MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
ASEMB-50.000MHZ-XY-T
Abracon's ASEMB-50.000MHZ-XY-T is a CMOS XO Clock Oscillator with 50MHz frequency, 3.3V supply voltage, and 15mA supply current. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 0.85mm package for surface mounting features.
SIT1532AC-J5-DCC-32.768D
Sitime
SIT1532AC-J5-DCC-32.768D by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 75% Frequency Stability, LVCMOS Technology, and 1.54mm x 0.84mm x 0.6mm Physical Dimension. It operates at 0.032768 MHz, suitable for applications requiring precise timing in temperature-sensitive environments like IoT devices and wearables due to its low power consumption of 0.0013 mA at a max supply voltage of 3.63 V.
FO7HHAAM4.096-T2
Fox Electronics
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 4.5 V;
ASEMB-24.000MHZ-LC-T
Abracon's ASEMB-24.000MHZ-LC-T is a 24MHz XO Clock Oscillator with 50% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication systems.
KC3225K25.0000C10E00
Kyocera
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
VCC1-B3D-50M0000000
Microchip Technology
Microchip Technology's VCC1-B3D-50M0000000 is a 50 MHz CMOS XO Clock Oscillator with 50% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3V and has a max rise time of 4ms. With surface mounting feature, it is ideal for electronics operating in the temperature range of -40 to 85°C.
DSC1001CI2-108.0000T
DSC1001CI2-108.0000T by Microchip Technology is a CMOS XO Clock Oscillator with a frequency stability of 25%. It operates at a nominal voltage of 3.3V and has a max operating temperature of 85°C. This oscillator is commonly used in applications that require precise timing, such as telecommunications and industrial automation.
7X-12.000MBB-T
Txc
7X-12.000MBB-T XO Clock Oscillator by Txc operates at 12MHz with a frequency stability of 50%. It has a CMOS oscillator type, 15pF output load, and requires 3.3V nominal voltage. Ideal for applications requiring precise timing in compact electronic devices due to its small physical dimensions and surface mounting feature.
XLL536160.316000I
Renesas Electronics
Renesas Electronics XLL536160.316000I is a 160.316 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates at a max supply voltage of 3.465 V and has a compact size of 5.0mm x 3.2mm x 1.1mm, making it ideal for space-constrained designs in various electronic devices.
SIT1532AC-J5-DCC-32.768E
SIT1532AC-J5-DCC-32.768E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 75% Frequency Stability, 3.63V Max Supply Voltage, and CMOS Technology. Ideal for LVCMOS applications requiring 0.032768 MHz frequency, it operates b/w -10 to 70 °C with low power consumption of 0.0013 mA at 1.5/3.3V supplies.
ASE-125.000MHZ-E-T
Abracon's ASE-125.000MHZ-E-T is a CMOS XO Clock Oscillator with 100% Frequency Stability at 125 MHz. It operates b/w -20°C to 70°C, has a Max Supply Voltage of 3.465 V, and Output Load of 15 pF. Ideal for applications requiring precise timing in compact designs.
SIT8008BI-21-XXX-000.FP0000E
SIT8008BI-21-XXX-000.FP0000E by Sitime is a PLASTIC XO Clock Oscillator with 20% Frequency Stability, 3.63V Max Supply Voltage, and 15pF Output Load. Ideal for LVCMOS applications like IoT devices, wearables, and communication systems due to its compact size (3.2mm x 2.5mm x 0.75mm) and wide operating temperature range (-40°C to 85°C).
CB3-3C-80M0000
Cts
CB3-3C-80M0000 by Cts is a 80 MHz XO Clock Oscillator with HCMOS/TTL type. It operates at 5V, has 50% frequency stability, and supports a max supply voltage of 5.5V. Ideal for applications requiring precise timing in electronic circuits with surface mounting feature.
LTC6908CS6-1#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm; Maximum Operating Frequency: 10 MHz;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved