Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
XO, Clock; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Nominal Operating Frequency: 168.041 MHz; Package Equivalence Code: DILCC6,.2; Minimum Operating Temperature: -40 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
XO Clock Oscillators 531AC168M041DG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Equivalence Code:
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Terminal Finish:
PCN Design/Specification - LOGO 17-Jan-2022 Mult Devices 11/Jul/2018
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EH2600ETTTS-2.097152MTR
Ecliptek
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; TAPE AND REEL;
ACO-50.000MHZ-E-K
Abracon
Abracon's ACO-50.000MHZ-E-K XO Clock Oscillator operates at 50MHz with 30% frequency stability. It has a max supply voltage of 5.5V and output load of 10 TTL, 15pF. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
ACHL-3.6864MHZ-EK
Abracon's ACHL-3.6864MHZ-EK is a 3.6864 MHz XO Clock Oscillator with 30% frequency stability, HCMOS/TTL type, and 8 terminals. Operating at temperatures from -20°C to 70°C, it has a max supply voltage of 3.63V and output load of 5 TTL/15 pF, making it ideal for applications requiring precise timing in various electronic devices.
VCC1-B3F-100M000000
Microchip Technology's VCC1-B3F-100M000000 is a CMOS XO Clock Oscillator with 25% Frequency Stability at 100 MHz. It operates b/w -40 to 85°C, has a max supply voltage of 3.63V, and output load of 15 pF. Ideal for applications requiring precise timing in electronic devices.
534GB000559DGR
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
ECS-8FA3X-184-TR
Ecs International
ECS-8FA3X-184-TR by Ecs International is a XO Clock Oscillator with 18.4 MHz frequency, 200% stability, and CMOS/TTL type. It operates at temperatures from -40 to 85°C, ideal for applications requiring precise timing in electronic devices. With a compact size of 14.0mm x 9.8mm x 4.7mm and surface mount feature, it's suitable for various electronic systems needing reliable clock signals.
LTC6908IS6-1
Analog Devices
LTC6908IS6-1 by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a max supply voltage of 5.5 V and output load of 5 pF, suitable for applications requiring precise timing in a compact form factor.
AX3DBF1-125.0000T3
Abracon's AX3DBF1-125.0000T3 XO Clock Oscillator operates at 125MHz with LVDS type, 25% frequency stability, and 2.62V max supply voltage. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 1.0mm package such as telecommunications and networking equipment.
LTC6991CS6#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm; Maximum Fall Time: 2.4 ns;
LTC6903IMS8#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Adjustment (Mechanical): NO; Terminal Finish: Matte Tin (Sn); Minimum Supply Voltage: 2.7 V;
SG-210STF25.0000MY3
Seiko Epson
SG-210STF25.0000MY3 by Seiko Epson is a 25 MHz XO Clock Oscillator with 50% frequency stability, operating at 3.3V with 2.2mA supply current. Ideal for applications requiring precise timing in temperature ranges from -40°C to 105°C, featuring CMOS oscillator type and surface mounting feature.
AX3DCF1-100.0000T3
Abracon's AX3DCF1-100.0000T3 is a 100MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at 1.8V, it offers fast rise time of 0.5ms and fall time of 0.5ns, making it ideal for high-speed digital circuits in temperature-sensitive environments.
SIT8008BI-12-28N-50.000000
Sitime
SIT8008BI-12-28N-50.000000 by Sitime is a PLASTIC XO Clock Oscillator with 25% Frequency Stability, 50 MHz Nominal Operating Frequency, and LVCMOS Oscillator Type. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, it has a compact size of 2.5mm x 2.0mm x 0.75mm and operates at supply voltages b/w 2.52V to 3.08V.
ASDMB-33.333MHZ-LC-T
Abracon's ASDMB-33.333MHZ-LC-T is a CMOS XO Clock Oscillator with 3.3V supply voltage, 15mA current, and 33.333MHz frequency range. Ideal for applications requiring precise timing in compact electronic devices due to its small form factor of 2.5mm x 2.0mm x 0.85mm and surface mounting feature.
LTC6906IS6#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.75mm x 1.0mm; Additional Features: TAPE AND REEL;
LTC6908IS6-1#WTRMPBF
LTC6908IS6-1#WTRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating at 10 MHz. It has a max supply voltage of 5.5V and low current output of 1.2A, suitable for AEC-Q100 applications in automotive electronics due to its small size and surface mount package.
ASE2-50.000MHZ-LC-T
Abracon's ASE2-50.000MHZ-LC-T is a 50MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
570BAB000118DG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 108 mA;
8W-12.000MBB-T
Txc
8W-12.000MBB-T by Txc is a CMOS XO Clock Oscillator with 12MHz frequency, 50% stability, and 15pF output load. Ideal for applications requiring precise timing in compact devices due to its small size (2.5mm x 2.0mm x 0.8mm) and surface mounting feature.
P123-125.0M
Connor Winfield
P123-125.0M by Connor Winfield is a ceramic XO Clock Oscillator with LVPECL type, operating at 125MHz frequency. It has a 50% stability, 3.465V max supply voltage, and 90mA max supply current. Ideal for applications requiring precise timing in temperature range of 0-70°C with surface mount feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved