Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 7 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .35 ms;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
XO Clock Oscillators 530FC156M000DGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Manufacturer Series:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Body Material:
Package Equivalence Code:
Physical Dimension:
Power Supplies (V):
Qualification:
Maximum Rise Time:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - LOGO 17-Jan-2022
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
2N2222A
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zowie Technology
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Operating Temperature: 125 Cel; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: 30 A;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Panjit International
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LTC6908HS6-2#TRMPBF
Analog Devices
LTC6908HS6-2#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating at frequencies from 0.05 MHz to 10 MHz. It has a supply voltage range of 2.7V to 5.5V and is suitable for applications requiring precise timing in temperature-sensitive environments.
SIT8008BI-11-YYE-25.000000D
Sitime
SIT8008BI-11-YYE-25.000000D by Sitime is a 25 MHz XO Clock Oscillator with LVCMOS type, 20% frequency stability, and 15 pF output load. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -40°C to 85°C.
DSC1123CI5-125.0000
Micrel
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 10 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.25 V;
FXO-HC536R-16.384
Renesas Electronics
Renesas Electronics' FXO-HC536R-16.384 is a 16.384 MHz XO Clock Oscillator with 25% frequency stability, HCMOS type, and 15 pF output load. Ideal for applications requiring precise timing in temperature-sensitive environments due to its wide operating range from -40°C to 85°C.
DSC1121AM2-025.0000
Microchip Technology
DSC1121AM2-025.0000 by Microchip: XO Clock Oscillator with 25% Frequency Stability, 25 MHz Nominal Frequency, and CMOS Oscillator Type. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 0.9mm package for surface mounting feature.
EH2600ETTTS-2.097152MTR
Ecliptek
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; TAPE AND REEL;
DSC1123CI5-100.0000
Microchip's DSC1123CI5-100.0000 XO Clock Oscillator operates at 100MHz with LVDS type, 10% frequency stability, and 3.6V max supply voltage. Ideal for applications requiring precise timing in a compact form factor, such as telecommunications and networking equipment.
LTC6905IS5-96#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 5; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: .5 ms;
LTC6908IS6-1#TRMPBF
LTC6908IS6-1#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 40% Frequency Stability, 5.5V Max Supply Voltage, and 5pF Output Load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication systems.
DSC1003CI2-025.0000
DSC1003CI2-025.0000 by Microchip: XO Clock Oscillator with 25% Frequency Stability, 10 KOHM output load, and 3.3V supply voltage. Ideal for applications requiring precise timing in electronics with CMOS oscillator type and 25 MHz operating frequency.
LTC6995HS6-1#PBF
LTC6995HS6-1#PBF by Analog Devices is a CMOS oscillator with 22000% frequency stability, suitable for applications requiring precise timing. With a max supply voltage of 5.5V and low supply current of 0.17mA, it is ideal for compact designs. Its small form factor of 2.9mm x 1.75mm x 1.0mm makes it perfect for surface mount installations in temperature-sensitive environments up to 125°C.
8.000MHZXO91050UITA
Euroquartz
Euroquartz 8.000MHZXO91050UITA is a CMOS XO Clock Oscillator with 8MHz frequency, 50% stability, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
ASEMPLV-100.000MHZ-LR-T
Abracon's ASEMPLV-100.000MHZ-LR-T is a 100MHz LVDS XO Clock Oscillator with 25% frequency stability, 3.6V max supply voltage, and 100 OHM output load. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range and compact size of 3.2mm x 2.5mm x 0.85mm.
16.000MHZXO91050UITA
Euroquartz 16.000MHZXO91050UITA is a 16MHz XO Clock Oscillator with 50% frequency stability, HCMOS/LSTTL type, and 15pF output load. Ideal for applications requiring precise timing in environments ranging from -40 to 85°C.
LFSPXO018044REEL
Iqd Frequency Products
LFSPXO018044REEL by Iqd Frequency Products is a 50 MHz HCMOS XO Clock Oscillator with 50% frequency stability, suitable for applications requiring precise timing. It operates at a nominal voltage of 3.3 V and has a max rise time of 8 ms, making it ideal for high-performance electronic systems. With its compact dimensions of 7.2mm x 5.2mm x 1.4mm and surface mounting feature, this oscillator is versatile for various electronic designs.
SIT8008BI-12-18E-1.000000E
SIT8008BI-12-18E-1.000000E by Sitime is a PLASTIC/EPOXY XO Clock Oscillator with 25% Frequency Stability, 1.98V Max Supply Voltage, and MIL-STD-883F Screening Level. Ideal for LVCMOS applications requiring 1MHz Nominal Operating Frequency in harsh environments with -40 to 85°C temperature range.
SIT2001BI-S2-33E-12.000000G
SIT2001BI-S2-33E-12.000000G by Sitime is a 12 MHz XO Clock Oscillator with LVCMOS type, 25% frequency stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in temperature range of -40 to 85 °C, it features surface mounting and nickel/palladium/gold terminal finish.
ASFLMPC-25.000MHZ-Z-T
ASFLMPC-25.000MHZ-Z-T by Abracon is a 6-terminal CMOS XO Clock Oscillator with a frequency range of 10 MHz to 100 MHz. It operates at voltages of 2.5V to 3.3V and has a compact size of 5.0mm x 3.2mm x 0.85mm, making it suitable for surface mount applications in various electronic devices.
CB3-3C-20M0000
Cts
CB3-3C-20M0000 by Cts is a ceramic XO Clock Oscillator with 20 MHz frequency, HCMOS/TTL type, and 50% stability. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its high accuracy and low jitter performance.
AX7DAF1-125.0000C
Abracon's AX7DAF1-125.0000C XO Clock Oscillator operates at 125 MHz with LVDS type, 25% frequency stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 1.8mm surface mount package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Silicon Labs
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved