Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
514CCC001059AAG by Silicon Labs is a CMOS XO Clock Oscillator with 20% frequency stability, operating at frequencies from 0.1 MHz to 125 MHz. It has a max supply voltage of 3.63 V and is MIL-STD-883 screened, making it suitable for applications requiring precise timing in harsh environments.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Nova Conductors
Ampacity Inc.
$4.010
Continental Prestige Electronics
Argo Parts USA
Authorized Procurement Solutions
Corphita
Aranea Global
Provides a stable clock signal, ensuring consistent and accurate timing in various applications.
Suitable for operation within standard voltage ranges, making it compatible with a wide range of systems.
Undergoes stringent testing to meet military-grade standards, ensuring reliability and durability in extreme conditions.
Designed to work efficiently with a specific load, optimizing performance and signal integrity.
Operates at a low current consumption, making it energy-efficient and suitable for battery-powered devices.
Operates at a commonly used voltage level, making it easy to integrate into existing systems.
Utilizes CMOS technology for low power consumption, high noise immunity, and fast switching speeds.
Provides a simple and compact design for easy integration into circuit boards with limited space.
Delivers fast rise times for quick and accurate signal transitions, ensuring precise timing.
Compact size allows for easy installation in small electronic devices or tight spaces.
Operates within a wide voltage range, providing flexibility for different power supply configurations.
Withstands high temperatures, making it suitable for industrial and automotive applications.
Operates in extremely cold environments, ensuring reliability in harsh conditions.
High-quality terminal finish for reliable connections and corrosion resistance, extending the lifespan of the oscillator.
Provides fast fall times for accurate signal transitions, improving overall performance.
Offers balanced duty cycle for equal high and low signal times, ensuring accurate timing in digital circuits.
Operates at low frequencies, suitable for applications that require precise timing at slower speeds.
Allows for easy and secure mounting on PCBs, saving space and simplifying assembly.
Capable of high-frequency operation, making it suitable for applications that require fast clock signals.
XO Clock Oscillators 514CCC001059AAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Package Equivalence Code:
Physical Dimension:
Maximum Rise Time:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - Mult Devices 11/Jul/2018
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
Hitachi
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Microsemi
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FXO-HC536R-16.384
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
CB3LV-3C-50M00000
Cts
CB3LV-3C-50M00000 by Cts is a 50 MHz XO Clock Oscillator with 50% frequency stability. It operates at a max supply voltage of 3.6V and has a max operating temperature of 70°C. This surface mount oscillator is commonly used in applications requiring precise timing and synchronization.
ECS-2100A-049
Ecs International
ECS-2100A-049 by Ecs International is a XO Clock Oscillator with 100% Frequency Stability, 5.25V Max Supply Voltage, and 4.9152 MHz Nominal Operating Frequency. Ideal for applications requiring precise timing in environments ranging from 0°C to 70°C.
510CCAM409600BAG
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Output Low Current: 8 Amp;
AX7PAF1-266.0000C
Abracon
Abracon's AX7PAF1-266.0000C is a LVPECL XO Clock Oscillator with 25% frequency stability, operating at 266 MHz. It has a max supply voltage of 3.63 V and output load of 50 ohms. Ideal for applications requiring precise timing in temperature-sensitive environments.
DSC1123CE1-125.0000
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 0.85mm;
FO5HSCBM50.0-T1
Abracon's FO5HSCBM50.0-T1 XO Clock Oscillator operates at 50MHz with 50% frequency stability, HCMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact 5.0mm x 3.2mm x 1.3mm package, with a wide operating temperature range from -40°C to 85°C.
LTC6905CS5-96#TRMPBF
Analog Devices
LTC6905CS5-96#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 20% frequency stability, 96 MHz nominal operating frequency, and 5 pF output load. It operates b/w -40 to 85 °C and is ideal for applications requiring precise timing in compact designs.
SIT8008AI-31-33E-27.299640
Sitime
SIT8008AI-31-33E-27.299640 by Sitime is a XO Clock Oscillator with 20% Frequency Stability, 3.63V Max Supply Voltage, and MIL-STD-883F Screening Level. Ideal for applications requiring LVCMOS oscillators with 27.29964 MHz frequency in compact dimensions of 5.0mm x 3.2mm x 0.75mm for surface mounting feature.
LTC6900IS5#TRPBF
LTC6900IS5#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 2.5% frequency stability, operating from 0.1 MHz to 20 MHz. It has a max supply voltage of 5.5V and low current output of 4A, suitable for applications requiring precise timing in compact designs like IoT devices.
LTC6995CS6-1#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: .17 mA;
ASEMB-25.000MHZ-XY-T
Abracon's ASEMB-25.000MHZ-XY-T is a 25MHz CMOS XO Clock Oscillator with 3.3V supply voltage, suitable for applications requiring frequencies from 1MHz to 150MHz. This surface-mount oscillator has a compact size of 3.2mm x 2.5mm x 0.85mm and operates in temperatures ranging from -40°C to 105°C, drawing a max current of 15mA.
ASEMPC-10.000MHZ-LR-T
Abracon's ASEMPC-10.000MHZ-LR-T is a 10MHz CMOS XO Clock Oscillator with 6 terminals and operates at 2.5/3.3V. It has a compact size of 3.2mm x 2.5mm x 0.85mm, making it ideal for applications requiring precise timing in temperature-sensitive environments up to 85°C, such as IoT devices and communication systems.
DSC1001DI1-033.3333T
Microchip Technology
Microchip Technology's DSC1001DI1-033.3333T is a 33.3333 MHz CMOS XO Clock Oscillator with 50% frequency stability, suitable for applications requiring a 3.3 V supply voltage. It features a 10 KOHM output load and operates within -40 to 85 °C temperature range, making it ideal for surface mount installations.
LTC6903CMS8#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Adjustment (Mechanical): NO; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 70 Cel;
514CBB000112BAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
ASEMB-16.000MHZ-LC-T
ASEMB-16.000MHZ-LC-T by Abracon is a 16 MHz XO Clock Oscillator with a frequency stability of 50%. It has a max operating temperature of 85°C and is suitable for surface mount applications.
SIT3907AC-CF-33NZ-40.000000T
SIT3907AC-CF-33NZ-40.000000T by Sitime is a XO Clock Oscillator with 10% frequency stability, 3.63V max supply voltage, and 15pF output load. It is commonly used in applications requiring precise timing such as telecommunications, networking, and industrial automation.
ASDMB-1.0000MHZ-LY-T
ASDMB-1.0000MHZ-LY-T by Abracon is a 1 MHz XO Clock Oscillator with a frequency stability of 10%. It operates at a nominal voltage of 3.3V and has a compact physical dimension of 2.5mm x 2.0mm x 0.85mm, making it suitable for surface mount applications in various electronic devices.
ASEMB-16.000MHZ-LY-T
Abracon's ASEMB-16.000MHZ-LY-T is a 16MHz XO Clock Oscillator with 10% frequency stability, 15pF output load, and CMOS type. Ideal for applications requiring precise timing in a compact form factor. Operating from -40°C to 85°C, it features a small footprint of 3.2mm x 2.5mm x 0.85mm for surface mount installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
514CCC001059AAGR
Silicon Labs
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Nickel/Gold (Ni/Au);
514CBB000112BAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
514CBB000112AAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 10 MHz;
514CBC001037BAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
514CCC000148BAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V;
514CAC000112BAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
514CCC000121AAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
514CAB000159BAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 5mm x 3.2mm x 1.33mm;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 1.2 ms;
514CCC001009AAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION;
514CCC001009AAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
514CCC001018BAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 5mm x 3.2mm x 1.28mm;
514CCC001025AAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Frequency: 125 MHz;
514CCC001025AAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Frequency: .1 MHz;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved