Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 1.2 ns;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
XO Clock Oscillators 514CBC001065AAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Package Equivalence Code:
Physical Dimension:
Maximum Rise Time:
Screening Level:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Bourns
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zetex Plc
SPC TECHNOLOGY/ MULTICOMP
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
LTC6908HS6-1#PBF
Analog Devices
LTC6908HS6-1#PBF by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a supply voltage range of 2.7V to 5.5V and is ideal for applications requiring precise timing in compact designs due to its small physical dimensions of 2.9mm x 1.5mm x 1.0mm.
LTC6906HS6#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF; Maximum Supply Voltage: 3.6 V;
ASD3-25.000MHZ-L-R-T
Abracon
Abracon's ASD3-25.000MHZ-L-R-T XO Clock Oscillator operates at 25MHz with 25% frequency stability. It has a compact size of 2.5mm x 2.0mm x 1.0mm and is ideal for applications requiring precise timing in temperature ranges from -40°C to 85°C, making it suitable for various electronic devices.
532PC000553DG
Silicon Labs
532PC000553DG by Silicon Labs is a CMOS XO Clock Oscillator with 7% frequency stability, operating b/w -40°C to 85°C. It has a max supply voltage of 3.63V and operates at frequencies ranging from 10MHz to 160MHz. Ideal for applications requiring precise timing in harsh environments per MIL-STD-883 screening standards.
SG-8002CA3.6864M-SCML3
Seiko Epson
SG-8002CA3.6864M-SCML3 by Seiko Epson is a ceramic XO Clock Oscillator with 3.6864 MHz frequency, 100% stability, and 15 pF load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and communication equipment.
LTC6906CS6#TRMPBF
LTC6906CS6#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 3.6V max supply voltage, 5pF output load, and 25ms rise time. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its compact size of 2.9mm x 1.75mm x 1.0mm and operating frequency range from 0.01MHz to 1MHz.
LTC6908IS6-1
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 9 ns;
EH2600ETTTS-2.097152MTR
Abracon's EH2600ETTTS-2.097152MTR is a XO Clock Oscillator with 100% Frequency Stability, operating at 2.097152 MHz. It has a Max Supply Voltage of 3.6 V and Output Load of 30 pF, suitable for LVCMOS applications in various electronic devices.
AX7DAF3-200.0000C
Abracon's AX7DAF3-200.0000C is a 200 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. Operating at a nominal voltage of 3.3 V, it offers fast rise and fall times of 0.35 ms and 0.35 ns respectively. With surface mounting feature, it is ideal for compact electronic devices in temperature-sensitive environments.
SG-3030JC32.7680KB3
SG-3030JC32.7680KB3 by Seiko Epson is a CMOS XO Clock Oscillator with 120% frequency stability, 15 pF output load, and 0.002 mA max supply current. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, with dimensions of 10.5mm x 5mm x 2.7mm for surface mount installation.
XLH736025.002000I
Integrated Device Technology
HCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.3mm;
SIT8920BM-71-18E-1.000000G
Sitime
SIT8920BM-71-18E-1.000000G by Sitime is a 1MHz LVCMOS XO Clock Oscillator with 20% frequency stability, suitable for applications requiring precise timing. It operates at 1.8V nominal voltage, has a max rise time of 2.5ms, and features a compact size of 2mm x 1.6mm x 0.75mm for surface mounting in various electronic devices.
530FB125M000DGR
Silicon Labs' 530FB125M000DGR is a PLASTIC/EPOXY XO Clock Oscillator with LVDS type, 125 MHz frequency, and 20% stability. Ideal for applications requiring precise timing such as communication systems, networking equipment, and industrial automation.
CB3LV-3C-50M000000-T
Cts
CB3LV-3C-50M000000-T by Cts is a 50 MHz XO Clock Oscillator with 50% Frequency Stability, HCMOS/TTL type. Operating at 3.3V, it has a 30 pF output load and dimensions of 7.0mm x 5.0mm x 1.8mm. Ideal for applications requiring precise timing in electronic devices with surface mount requirements.
LTC6908IS6-1#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm;
ECS-2100AX-049
Ecs International
ECS-2100AX-049 by Ecs International is a XO Clock Oscillator with 4.9MHz frequency, HCMOS/TTL type, and 100% stability. Ideal for applications requiring precise timing in environments with temperatures ranging from 0 to 70°C.
ASE-24.000MHZ-L-C-T
Abracon's ASE-24.000MHZ-L-C-T is a 24MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
DSC1103CI5-045.0000
Microchip Technology
Microchip's DSC1103CI5-045.0000 XO Clock Oscillator operates at 45MHz with LVDS type, 10% frequency stability, and 100 OHM output load. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, it features a compact size of 3.2mm x 2.5mm x 0.85mm for surface mount installations.
SG-8002CA48.0000M-PHCL3
SG-8002CA48.0000M-PHCL3 by Seiko Epson is a CMOS XO Clock Oscillator with 48 MHz frequency, 100% stability, and 25 pF load. Ideal for applications requiring precise timing in temperature range of -20 to 70°C.
SG-8018CG123.456789M-TJHSA0
SG-8018CG123.456789M-TJHSA0 by Seiko Epson is a CMOS XO Clock Oscillator with 123.456789 MHz frequency, 50% stability, and 15 pF output load. Ideal for applications requiring precise timing in a compact form factor, with operating temperatures ranging from -40 to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved