Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 510KBA25M0000AAGR is a CMOS XO Clock Oscillator with 25 MHz frequency, 25% stability, and 15 pF output load. Ideal for applications requiring precise timing in temperature ranges from -40 to 85°C.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Nova Conductors
Ampacity Inc.
$1.010
Aranea Global
Argo Parts USA
Continental Prestige Electronics
Corphita
Provides reliable and consistent clock signal for precision timing applications.
Allows for efficient power consumption and compatibility with low voltage systems.
Suitable for driving standard loads without compromising performance.
Optimal voltage for stable operation and low power consumption.
CMOS technology provides fast switching speeds and low power consumption.
Ensures quick rise time for rapid signal transmission.
Compact size for easy integration into electronic devices.
Allows operation at lower voltages for energy-efficient applications.
Can withstand high temperatures, ideal for industrial environments.
Capable of functioning in extreme cold conditions without performance degradation.
Provides corrosion resistance and reliable electrical connections.
Suitable for various applications requiring a 25 MHz clock signal.
Fast fall time for efficient signal transitions.
Maintains signal symmetry for accurate timekeeping.
Easy to install on circuit boards for streamlined production processes.
XO Clock Oscillators 510KBA25M0000AAGR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Assembly/Origin - DiamondX 10-24-22
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1N4148WS
Tak Cheong Electronics Holdings
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
532PA000298DG
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
ECS-2333-400-BN-TR
Ecs International
ECS-2333-400-BN-TR by Ecs International is a XO Clock Oscillator with 40MHz frequency, HCMOS type, and 50% stability. It operates at -40 to 85°C, has a 3.63V max supply voltage, and is ideal for surface mount applications requiring precise timing in electronic devices.
EH3600ETTS-52.4288MTR
Ecliptek
LVCMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 100 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 60/40;
510PCA100M000BAG
Silicon Labs
CMOS; Power Supplies (V): 2.5; JESD-609 Code: e4; Qualification: Not Qualified; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
511BBA125M000BAG
LVDS; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
534GB000559DG
534GB000559DG by Silicon Labs is a CMOS XO Clock Oscillator with 20% frequency stability, operating from 10 MHz to 160 MHz. It has MIL-STD-883 screening level and operates at -40°C to 85°C. Ideal for applications requiring precise timing in harsh environments.
511BBA200M000AAG
SIT8008BI-13-33E-8.000000G
Sitime
SIT8008BI-13-33E-8.000000G by Sitime is a 4-terminal XO Clock Oscillator with 8MHz frequency, LVCMOS type, and 50% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
570FAB000433DG
The Silicon Labs 570FAB000433DG is a LVDS XO Clock Oscillator with 50% frequency stability, operating at frequencies up to 1417.5 MHz. It has a max supply voltage of 2.75 V and output load of 100 ohms, suitable for high-speed applications requiring precise timing control.
ASEMPC-100.000MHZ-Z-T
Abracon
Abracon's ASEMPC-100.000MHZ-Z-T is a CMOS XO Clock Oscillator with 2.5/3.3V power supplies, operating at frequencies from 10MHz to 100MHz. Its compact size of 3.2mm x 2.5mm x 0.85mm makes it ideal for surface mount applications in various electronic devices requiring precise timing control in temperatures ranging from -55°C to 125°C.
ASDMB-8.000MHZ-XY-T
Abracon's ASDMB-8.000MHZ-XY-T is a 4-terminal XO Clock Oscillator with 8MHz frequency, CMOS technology, and 10% stability. Ideal for applications requiring precise timing in a compact form factor such as IoT devices and wearables due to its small size (2.5mm x 2.0mm x 0.85mm) and low power consumption (15mA).
LTC6908CDCB-1#TRMPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 55/45;
AX7DBF1-150.0000C
Abracon's AX7DBF1-150.0000C XO Clock Oscillator operates at 150MHz with LVDS type, 25% frequency stability, and 2.75V max supply voltage. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 1.8mm surface mount package.
570BAB001614DGR
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LTC6991CS6#PBF
Analog Devices
LTC6991CS6#PBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5pF output load, and 2.7ms rise time. Ideal for applications requiring precise timing control in compact designs due to its small form factor of 2.9mm x 1.5mm x 1.0mm and surface mounting feature.
DSC1123CI2-200.0000T
Microchip Technology's DSC1123CI2-200.0000T is a 200 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates b/w -40°C to 85°C, with a supply voltage range of 2.25V to 3.6V and features a compact size of 3.2mm x 2.5mm x 0.85mm for surface mount installations.
570CAC000149DGR
570CAC000149DGR by Silicon Labs is a CMOS XO Clock Oscillator with 50% Frequency Stability, 3.63V Max Supply Voltage, and MIL-STD-883 Screening Level. Ideal for applications requiring precise timing such as telecommunications equipment, networking devices, and industrial automation systems.
532PC000553DGR
532PC000553DGR by Silicon Labs is a CMOS XO Clock Oscillator with 7% frequency stability, operating from -40°C to 85°C. It has a max supply voltage of 3.63V and operates at frequencies ranging from 10MHz to 160MHz. Ideal for applications requiring precise timing in harsh environments like military and aerospace systems.
ASDMB-20.000MHZ-LY-T
Abracon's ASDMB-20.000MHZ-LY-T is a 20 MHz XO Clock Oscillator with 10% frequency stability, CMOS technology, and 15 pF output load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication equipment.
ASEMB-12.000MHZ-LC-T
ASEMB-12.000MHZ-LC-T by Abracon is a 12 MHz CMOS XO Clock Oscillator with a max supply current of 15 mA and nominal voltage of 3.3 V. It is commonly used in applications requiring precise timing, such as telecommunications equipment and industrial automation systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
510KBA25M0000AAGR
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 1.2 ns; Minimum Supply Voltage: 1.71 V;
510KBA25M0000BAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
510KCA200M000CAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
510KBA25M0000CAGR
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Nickel/Gold (Ni/Au); Maximum Supply Voltage: 1.89 V;
510KBA25M0000AAG
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 7.0mm x 5.0mm x 1.8mm; Maximum Fall Time: 1.2 ns;
510KBA25M0000CAG
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e4;
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 1.1mm; Minimum Supply Voltage: 1.71 V;
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 1.2 ns; Maximum Operating Temperature: 85 Cel;
CMOS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Additional Features: ENABLE/DISABLE FUNCTION; TR; Maximum Symmetry (%): 52/48;
510KBA250M000BAGR
510KBA250M000CAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 1.89 V;
510KBA250M000AAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 250 MHz;
510KBA250M000CAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 1.8 V;
510KBA250M000AAGR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
510KBA250M000BAG
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 5mm x 3.2mm x 1.33mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved