Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
510BBA125M000BAG by Silicon Labs is a LVDS XO Clock Oscillator with 125 MHz frequency, 50% stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in temperature-sensitive environments due to its -40°C to 85°C operating range.
Median Price
$4.113
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$5.440
100+ parts
$3.950
1k+ parts
$3.570
10k+ parts
-
DigiKey
$6.180
$4.665
$4.056
$3.875
Rochester
$3.360
$3.010
$2.830
Arrow
$3.646
Verical
Chip1Stop
$4.580
Digiode
$4.085
Vyrian
VNN
Nova Conductors
Aztec Data Supply Inc.
$1.887
Corohmni
$3.273
Semicontronic
$3.630
$3.539
$3.521
Ampacity Inc.
Corphita
$3.870
Continental Prestige Electronics
Aranea Global
Argo Parts USA
Perfect Parts
Formix International (Excess)
This clock oscillator offers a high level of frequency stability, ensuring accurate timing in electronic devices.
With a maximum supply voltage of 3.63 V, this clock oscillator is compatible with a wide range of electronic circuits and systems.
The 100 OHM output load ensures reliable signal output and compatibility with various applications.
The 3.3 V nominal supply voltage provides stable power to the oscillator for consistent performance.
The LVDS oscillator type offers low voltage differential signaling, reducing noise and improving signal integrity.
With 6 terminals, this clock oscillator is easy to integrate into circuit designs and provides flexibility for connection.
The fast rise time of 0.8 ms ensures quick signal transitions, suitable for high-speed applications.
The compact size of this clock oscillator allows for space-efficient PCB layout and integration in small electronic devices.
With a minimum supply voltage of 2.97 V, this clock oscillator can operate efficiently even under low power conditions.
This clock oscillator can withstand high operating temperatures, making it suitable for various environmental conditions.
The wide temperature range of -40 to 85°C ensures reliable performance in extreme temperature conditions.
The gold terminal finish with nickel barrier provides corrosion resistance and ensures long-term reliability of connections.
With a nominal operating frequency of 125 MHz, this clock oscillator is suitable for high-speed applications that require precise timing.
The fast fall time of 0.8 ns ensures quick signal transitions and precise timing in electronic circuits.
The symmetry of 52/48 ensures balanced signal output, reducing distortion and improving signal quality.
The surface mounting feature allows for easy installation on PCBs, saving space and simplifying assembly processes.
XO Clock Oscillators 510BBA125M000BAG attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
PCN Design/Specification - Mult Devices 11/Jul/2018 Si5xx 08/Aug/2016
PCN Assembly/Origin - DiamondX 10-24-22
PCN Other - Skyworks Acquisition 9/Jul/2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
SBAV99LT1G
Onsemi
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Eic Semiconductor
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semtech
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
DSC1001DI1-024.0000
Microchip Technology
Microchip's DSC1001DI1-024.0000 XO Clock Oscillator operates at 24 MHz with 50% frequency stability, suitable for CMOS applications. It has a 3.3 V supply voltage, 10 KOHM output load, and compact dimensions of 2.5mm x 2.0mm x 0.85mm, making it ideal for surface mount installations in various electronic devices.
ASDMB-12.000MHZ-LY-T
Abracon
Abracon's ASDMB-12.000MHZ-LY-T is a 12 MHz XO Clock Oscillator with 10% frequency stability, 15 pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in temperature range of -40 to 85°C. Dimensions are 2.5mm x 2.0mm x 0.85mm, making it suitable for surface mounting feature.
ASFLMB-1.0000MHZ-LR-T
Abracon's ASFLMB-1.0000MHZ-LR-T is a 1MHz XO Clock Oscillator with 25% frequency stability, CMOS type, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor like IoT devices and wearables due to its small size (5.0mm x 3.2mm x 0.85mm) and wide operating temperature range (-40°C to 85°C).
511FBA125M000AAG
Silicon Labs
511FBA125M000AAG by Silicon Labs is a 125 MHz LVDS XO Clock Oscillator with 25% frequency stability. Operating at temperatures from -40 to 85 °C, it has a max supply voltage of 2.75 V and output load of 100 OHM. Ideal for applications requiring precise timing in compact designs.
LTC6908IS6-1
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 9 ns;
ASEMB-16.000MHZ-LC-T
ASEMB-16.000MHZ-LC-T by Abracon is a 16 MHz XO Clock Oscillator with a frequency stability of 50%. It has a max operating temperature of 85°C and is suitable for surface mount applications.
DSC1101DL5-020.0000T
DSC1101DL5-020.0000T by Microchip: 20MHz XO Clock Oscillator with 10% stability, 3.6V max supply voltage, and 15pF output load. Ideal for CMOS applications in a wide temperature range from -40°C to 105°C.
LTC6900IS5#TRPBF
Analog Devices
LTC6900IS5#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 2.5% frequency stability, operating from 0.1 MHz to 20 MHz. It has a max supply voltage of 5.5V and low current output of 4A, suitable for applications requiring precise timing in compact designs like IoT devices.
SG-8018CA123.456789M-TJHSA0
Seiko Epson
SG-8018CA123.456789M-TJHSA0 by Seiko Epson is a CMOS XO Clock Oscillator with a frequency stability of 50%. It operates at a nominal frequency of 123.456789 MHz and has a max supply voltage of 3.63 V. This oscillator is suitable for surface mount applications requiring precise timing.
511BCA100M000BAG
LVDS; JESD-609 Code: e4; Qualification: Not Qualified; Terminal Finish: Nickel/Gold (Ni/Au); Power Supplies (V): 3.3;
LTC6991HS6#TRMPBF
LTC6991HS6#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 5.5V max supply voltage, 5 KOHMS output load, and 2.7ms rise time. Ideal for applications requiring precise timing control in compact designs due to its small form factor of 2.9mm x 1.5mm x 1.0mm and surface mounting feature.
570FBC000121DGR
570FBC000121DGR by Silicon Labs is a LVDS XO Clock Oscillator with 20% frequency stability, operating at frequencies up to 1417.5 MHz. It has a max supply voltage of 2.75 V and is ideal for applications requiring precise timing in electronic devices.
SG-8002CA19.6608M-PHMB
SG-8002CA19.6608M-PHMB by Seiko Epson is a ceramic XO Clock Oscillator with 19.6608 MHz frequency stability, 5.5 V max supply voltage, and 25 pF output load. Ideal for applications requiring precise timing in electronics with operating temperatures ranging from -40 to 85 °C.
LTC6991HDCB#TRMPBF
LTC6991HDCB#TRMPBF by Analog Devices is a CMOS XO Clock Oscillator with 6 terminals. It operates b/w -40°C to 125°C, with a supply voltage range of 2.25V to 5.5V. Featuring a compact size of 3.0mm x 2.0mm x 0.75mm, it's ideal for applications requiring precise timing in various electronic devices.
ASE-8.000MHZ-L-C-T
Abracon's ASE-8.000MHZ-L-C-T is an 8MHz XO Clock Oscillator with 50% frequency stability, 3.465V max supply voltage, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and communication systems.
LTC6995IDCB-2#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.0mm x 2.0mm x 0.75mm;
LTC6908IS6-1#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 2.9mm x 1.5mm x 1.0mm;
ASDMB-3.6864MHZ-XY-T
Abracon's ASDMB-3.6864MHZ-XY-T is a 3.3V CMOS XO Clock Oscillator with 10% frequency stability, suitable for applications requiring precise timing. It operates at 3.6864 MHz with a max rise time of 2 ms and features a compact size of 2.5mm x 2.0mm x 0.85mm, making it ideal for surface mount installations in temperature-sensitive environments.
AX7PAF2-2100.0000T
Abracon's AX7PAF2-2100.0000T XO Clock Oscillator operates at 2100 MHz with LVPECL type, 25% frequency stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in a compact 7.0mm x 5.0mm x 1.8mm surface-mount package, from -40°C to 85°C temperature range.
LTC6995MPS6-1#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: MATTE TIN;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
510BCA100M000AAGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
LVDS; Qualification: Not Qualified; Power Supplies (V): 3.3; JESD-609 Code: e4; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
510BCA125M000AAG
510BCA125M000AAG by Silicon Labs is a XO Clock Oscillator with 20% frequency stability, LVDS type, and 125 MHz nominal frequency. It operates b/w -40 to 85 °C and has a max supply voltage of 3.63 V. Ideal for applications requiring precise timing in compact designs.
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125 MHz; Maximum Symmetry (%): 52/48;
510BBA100M000AAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Package Equivalence Code: DILCC6,.2;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
510BBA125M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
510BCA125M000AAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; Maximum Supply Voltage: 3.63 V;
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier; Maximum Operating Temperature: 85 Cel;
510BBA100M000BAG
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 100 MHz;
510BBA125M003AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Additional Features: TRI-STATE; ENABLE/DISABLE FUNCTION; COMPLEMENTARY OUTPUT; TRAY;
510BBA125M003AAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; Maximum Rise Time: .8 ms;
510BBA126M800AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
510BBA126M800AAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Output Load: 100 OHM; Nominal Supply Voltage: 3.3 V;
510BBA127M400AAG
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V; Maximum Fall Time: .8 ns;
510BBA127M400AAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 3.63 V; Maximum Operating Temperature: 85 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Physical Dimension: 7.0mm x 5.0mm x 1.8mm;
510BBA127M213AAGR
LVDS; Mounting Feature: SURFACE MOUNT; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V; Minimum Operating Temperature: -40 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved