Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Silicon Labs' 500SAAA3M58000ACFR is a CMOS XO Clock Oscillator with 150% Frequency Stability, 3.63V Max Supply Voltage, and 15pF Output Load. Ideal for applications requiring precise timing such as telecommunications equipment, networking devices, and industrial automation systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Nova Conductors
Semicontronic
$0.010
Aztec Data Supply Inc.
$0.570
Ampacity Inc.
$2.010
Corohmni
$2.502
AZTECH Wire
$17.620
$16.920
$16.580
$16.250
Continental Prestige Electronics
Argo Parts USA
Corphita
Bastille Electronics
Provides a high level of stability in frequency output, ensuring precise timekeeping and synchronization.
Allows for a wide range of voltage input, making it compatible with various power sources.
Suitable for driving standard load capacitance, ensuring efficient performance.
Operates at a common voltage level, making it easy to integrate into existing circuits.
Utilizes CMOS technology for low power consumption and reliable operation.
Simple and easy to connect with a limited number of terminals, reducing complexity.
Provides fast rise time for quick signal processing and response.
Compact size for space-saving and easy integration into small electronic devices.
Can operate at low voltage levels, increasing flexibility in power supply options.
Capable of operating in high-temperature environments, suitable for a wide range of applications.
Designed to function in low-temperature conditions, ensuring reliable performance in various settings.
Operates at a standard frequency, suitable for a variety of timing and clocking applications.
Offers fast fall time for efficient signal transitions and precise timing control.
Provides balanced output waveforms with good symmetry, ensuring accurate timing.
Surface mountable for easy and secure installation on PCBs, saving assembly time and effort.
XO Clock Oscillators 500SAAA3M58000ACFR attributes and parameters. Explore more XO Clock Oscillators devices from Silicon Labs
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Maximum Symmetry (%):
PCN Obsolescence/ EOL - 500S/500D 21-Jun-2021
Silicon Laboratories, Inc. (Silicon Labs) is a fabless global technology company that designs and manufactures semiconductors, other silicon devices and software, which it sells to electronics design engineers and manufacturers in Internet of Things (IoT) infrastructure worldwide. It is headquartered in Austin, Texas, United States. The company focuses on microcontrollers (MCUs) and wireless system on chips (SoCs) and modules. The company also produces software stacks including firmware libraries and protocol-based software, and a free software development platform called Simplicity Studio. Silicon Labs was founded in 1996 and released its first product, an updated DAA design that enabled manufacturers to reduce the size and cost of a modem, two years later. During its first three years, the company focused on RF and CMOS integration, and developed the world's first CMOS RF synthesizer for mobile phones which was released in 1999. Following the appointment of Tyson Tuttle as the CEO in 2012, Silicon Labs has increasingly focused on developing technologies for the IoT market, which in 2019 accounted for more than 50 percent of the company's revenue, but in 2020 had increased to about 58 percent. In 1998, Silicon Labs released its first product, an updated Direct Access Arrangement (DAA) design that enabled manufacturers to reduce the size and cost of a modem.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
BAV99
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
BSS138BK,215
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
ASFLK-32.768KHZ-L-J-T
Abracon
Abracon's ASFLK-32.768KHZ-L-J-T is a ceramic XO Clock Oscillator with 20% frequency stability, 3.63V max supply voltage, and 1mA max supply current. Ideal for applications requiring precise timing at temperatures ranging from -40 to 85°C, such as in telecommunications equipment or industrial automation systems.
LTC6908HS6-1
Analog Devices
LTC6908HS6-1 by Analog Devices is a CMOS XO Clock Oscillator with 40% frequency stability, operating from 0.05 MHz to 10 MHz. It has a supply voltage range of 2.7V to 5.5V and low output current of 1.2A, suitable for applications requiring precise timing in compact designs like IoT devices and wearables.
KC3225K25.0000C10E00
KYOCERA AVX
KC3225K25.0000C10E00 by KYOCERA AVX is a 25 MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15 pF output load. It operates b/w -10°C to 70°C, has a max supply voltage of 3.63 V, and requires only 5 mA max supply current. Ideal for applications requiring precise timing in compact electronic devices.
ASEMB-8.000MHZ-LC-T
Abracon's ASEMB-8.000MHZ-LC-T is a CMOS XO Clock Oscillator with 8MHz frequency, 3.3V supply voltage, and 15mA max current. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm package, operating b/w -40°C to 85°C temperature range.
LTC6906HS6#TRPBF
LTC6906HS6#TRPBF by Analog Devices is a CMOS XO Clock Oscillator with 3.6V max supply voltage, 5pF output load, and 25ms rise time. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and communication systems.
MXO45HS-2C-4M9152
Cts
Cts MXO45HS-2C-4M9152 is a 4.9152 MHz XO Clock Oscillator with HCMOS/TTL type, 100% frequency stability, and 5.5V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
24.000MHZXO91050UITA
Euroquartz
Euroquartz 24.000MHZXO91050UITA is a 24MHz XO Clock Oscillator with 50% frequency stability, CMOS/LSTTL type, and 3.465V max supply voltage. Ideal for applications requiring precise timing in temperature range of -40 to 85°C.
DSC1001DI2-028.6363
Microchip Technology's DSC1001DI2-028.6363 is a CMOS XO Clock Oscillator with 25% frequency stability, 10 KOHM output load, and 3.3V supply voltage. Ideal for applications requiring precise timing at temperatures ranging from -40 to 85 °C, it features a compact size of 2.5mm x 2.0mm x 0.85mm and surface mounting feature.
LTC6995IS6-2#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Package Body Material: PLASTIC/EPOXY;
LTC6908IS6-1#TRM
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 23; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 11 ms;
LTC6906CS6#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 25 ms; Maximum Operating Frequency: 1 MHz;
AX3PAF1-156.2500T3
Abracon's AX3PAF1-156.2500T3 XO Clock Oscillator operates at 156.25 MHz with LVPECL type, 25% frequency stability, and 3.63V max supply voltage. Ideal for applications requiring precise timing in a compact 3.2mm x 2.5mm x 1.0mm package like telecommunications and networking equipment.
ACHL-32.000MHZ-EK
Abracon's ACHL-32.000MHZ-EK is a 32MHz XO Clock Oscillator with 30% frequency stability, HCMOS/TTL type, and 3.3V nominal voltage. Ideal for applications requiring precise timing such as communication systems, industrial automation, and test equipment due to its high accuracy and reliability.
SIT9121AC-1D2-33E50.000000
Sitime
SIT9121AC-1D2-33E50.000000 by Sitime is a LVPECL XO Clock Oscillator with 50 MHz frequency, 25% stability, and 3.63 V max supply voltage. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, such as telecommunications and networking equipment.
LTC6991IS6#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 2.7 ms; Maximum Operating Temperature: 85 Cel;
LTC6995CS6-2#PBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Output Load: 5 pF;
ASDMB-25.000MHZ-T
Abracon's ASDMB-25.000MHZ-T is a 25MHz CMOS XO Clock Oscillator with 4 terminals and operates at 1.8/3.3V. It has a compact size of 2.5mm x 2.0mm x 0.85mm, suitable for surface mount applications in various electronic devices like IoT sensors and wearables due to its wide operating temperature range of 0-70°C.
LTC6995IDCB-2#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.0mm x 2.0mm x 0.75mm;
AX7PAF1-266.0000C
Abracon's AX7PAF1-266.0000C is a LVPECL XO Clock Oscillator with 25% frequency stability, operating at 266 MHz. It has a max supply voltage of 3.63 V and output load of 50 ohms. Ideal for applications requiring precise timing in temperature-sensitive environments.
DSC1001AE5-040.0000
Microchip Technology's DSC1001AE5-040.0000 is a 40 MHz XO Clock Oscillator with 10% frequency stability and AEC-Q100 screening for automotive applications. It operates at 3.3V, consumes 12.2mA max supply current, and has a compact size of 7.0mm x 5.0mm x 0.9mm suitable for surface mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
500SAAD3M58000ACFR
Silicon Labs
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Nominal Supply Voltage: 3.3 V;
Skyworks Solutions
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Maximum Rise Time: 2 ms;
500SAAA3M58000ACF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Minimum Supply Voltage: 2.97 V;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 70 Cel;
500SAAA3M58000ACFR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Maximum Fall Time: 2 ns;
500SAAD3M58000ACF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Output Load: 15 pF;
500SAAA3M57000ACFR
500SAAA3M57000ACF
500SAAA3M85400ACFR
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Maximum Symmetry (%): 54/46;
500SAAA3M85400ACF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Additional Features: TRI-STATE; OUTPUT ENABLE FUNCTION; TAPE AND REEL;
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 150 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: 0 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved