Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Shape: RECTANGULAR; Turn-on Time: 20 us; Output Current Flow Direction: SINK;
Median Price
$4.032
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Freelance Electronics
1+ parts
$1.913
100+ parts
$2.009
1k+ parts
$1.894
10k+ parts
-
Component Electronics Inc.
$6.150
$4.620
$4.000
American Microsemiconductor Inc.
$6.220
Component Sense
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
Pegasus Components GmbH
J2 Sourcing AB
Q Components
Manotoh
Bristol Electronics
$1.406
$0.787
Vyrian
Digiode
Kepictronics
Metaverse IC Inc.
A-Z Elektronik GmbH
Alle Elektronik GmbH
Glotronic Ltd.
Authorized Procurement Solutions
Native Components
Corphita
Assy Fe
Northwest PG Solutions
Peripheral Drivers BSP75E6327 attributes and parameters. Explore more Peripheral Drivers devices from Siemens
Built-in Protections:
Interface IC Type:
JESD-30 Code:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Nominal Supply Voltage:
Surface Mount:
Terminal Form:
Terminal Position:
Turn-off Time:
Turn-on Time:
BSP75E6327 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
1N4148W-7-F
1N4148W-7-F by Diodes Inc. is a single rectifier diode with 0.715V max forward voltage and 100V max reverse voltage. Ideal for applications requiring fast switching speeds, it has a small outline package style and matte tin terminal finish, making it suitable for surface mount PCB designs.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
L293DD013TR
L293DD013TR by STMicroelectronics is a 20-terminal peripheral driver with a max supply voltage of 36V. It features built-in thermal protection and offers a nominal output peak current limit of 1.2A. Ideal for applications requiring source and sink output current flow direction, such as buffer or inverter-based interface ICs.
ST890DTR
ST890DTR by STMicroelectronics is a peripheral driver with 8 terminals and built-in protections against over current and thermal issues. It operates at supply voltages ranging from 2.7V to 5.5V, making it suitable for industrial applications requiring a max output current of 1.2A. The chip carrier package style with a very thin profile and surface mount capability ensures efficient performance in compact spaces.
ADUM5230ARWZ
Analog Devices
ADUM5230ARWZ by Analog Devices is a CMOS peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and has built-in under voltage protection. With a max supply voltage of 5.5 V, it is ideal for industrial applications requiring true output polarity and Schmitt trigger input characteristics.
FSFR2100
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
AUIPS6041GTR
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8846RGET
Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.
VNI2140JTR
VNI2140JTR by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 9-36 V, and built-in protections for transient, thermal, and under voltage. It is designed for automotive applications with a max output current of 0.5 A and interface IC type as buffer or inverter based peripheral driver.
TPIC6595DWR
TPIC6595DWR by Texas Instruments is a SIPO-based peripheral driver with 8 channels, each capable of sinking up to 0.5A current. It operates b/w -40°C to 125°C and has built-in transient protection. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.
BTS432E2E3062AXT
Infineon Technologies
BTS432E2E3062AXT by Infineon: MOS tech, 42V max supply, 44A peak current limit. Applicable as a buffer/inverter-based peripheral driver for various applications requiring source output flow direction control.
VN751PT13TR
VN751PT13TR by STMicroelectronics is a peripheral driver with a max supply voltage of 36V and built-in transient protections. It operates in automotive applications, offering a nominal output peak current limit of 2.5A. With a small outline package style and gull wing terminal form, it is suitable for surface mount installations in various electronic systems.
MAX14914BATE+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
ULN2003AFWG
Toshiba
Toshiba's ULN2003AFWG is a 16-terminal peripheral driver with open-collector output, ideal for buffer or inverter-based applications. With a small outline package style and gull wing terminals, it offers standard input characteristics and inverted output polarity. This bipolar technology device features transient protection and sink current flow direction, making it suitable for various electronic designs.
VN7140ASTR
STMicroelectronics' VN7140ASTR is a peripheral driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 4V to 28V and has a turn-on time of 120 us. Ideal for applications requiring buffer or inverter based interface ICs in compact designs.
VN340SP13TR
STMicroelectronics' VN340SP13TR is a 4-function peripheral driver with built-in protections for over current, thermal, and under voltage. It operates at a nominal voltage of 24V and has a max supply voltage of 36V. With a turn-on time of 100us and turn-off time of 50us, it is ideal for applications requiring fast response times in automotive electronics.
NCV8401ADTRKG
NCV8401ADTRKG by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 25us. Ideal for applications requiring buffer or inverter based interface ICs in automotive electronics due to AEC-Q101 screening level.
IRS21844MTRPBF
International Rectifier Hirel Products
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 16; Package Code: HQCCN; Package Shape: SQUARE;
SZNUD3160DMT1G
SZNUD3160DMT1G by Onsemi is a 6-terminal peripheral driver with AEC-Q101 screening. It features transient protection, operates b/w -40 to 125 °C, and has a small outline package style. Ideal for automotive applications requiring sink output current flow direction.
ULQ2003D1013TRY
STMicroelectronics ULQ2003D1013TRY is a 16-terminal peripheral driver with open-collector output, suitable for applications requiring inverted polarity. It operates b/w -40 to 105 °C and has a nominal voltage of 50V. With built-in transient protection, this small outline package driver is ideal for buffer or inverter-based interface ICs.
MIC5801YWM-TR
Microchip Technology
MIC5801YWM-TR by Microchip Technology is an 8-function peripheral driver with built-in transient protection. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 5V. This small outline package (15.42mm x 7.52mm) features inverted output polarity, Gull Wing terminals, and sink current flow direction, making it ideal for various interface applications requiring buffer or inverter-based drivers.
EL7156CSZ-T7A
Renesas Electronics
EL7156CSZ-T7A by Renesas Electronics is a small outline peripheral driver with 8 terminals, operating temperature range of -40 to 85°C. It has a nominal voltage of ±5V and output peak current limit of 3.5A. Ideal for industrial applications requiring source and sink current flow control in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Siemens
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved