Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EQUIPMENT LEAKAGE CIRCUIT BREAKER; Mounting Feature: DIN-RAIL MOUNT; Rated AC Voltage: 230 V; Rated Current: 25 A; Terminal Shape: SCREW AND SNAP ON; Body Height: 70 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
ACDS - Activité Composants Distribution Service
1+ parts
100+ parts
1k+ parts
10k+ parts
Robosynatics
$2.420
$2.241
Lucentia Tech
Circuit Breaker 5SV3612-6 attributes and parameters. Explore more Circuit Breaker devices from Siemens
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Height:
Body Length/Diameter:
Body Width:
Dimensions:
Actuator Type:
Circuit Function:
No. of Poles:
Circuit Protection Type:
Maximum Operating Temperature:
Environmental Characteristics:
Terminal Shape:
Mounting Feature:
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M85049/85-08W02
Glenair
CONNECTOR ACCESSORY; MIL Conformity: YES; Material: ALUMINIUM ALLOY; Associated Backshell Military - Specifications: MIL-DTL-38999; Shell Sizes: 08; DIN Conformity: NO;
LM358N
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
IEG1-1-52-20.0-01-V
Sensata Technologies
Sensata Technologies' IEG1-1-52-20.0-01-V is a 20A magnetic circuit breaker with quick connect terminals. It offers trip-free circuit protection, rated at 7500A breaking capacity and operates b/w -40°C to 85°C. Ideal for panel mounting applications requiring corrosion/moisture resistance in environments meeting CCC and VDE standards.
FAZ-D1.5/3-NA-L
Eaton Corporation
Eaton Corporation's FAZ-D1.5/3-NA-L is a 240V thermal magnetic circuit breaker with 1.5A rated current and 10000A breaking capacity. Featuring SNAP ON terminals, TOGGLE actuator, and DIN RAIL MOUNT, it is ideal for manual on/off circuit protection in applications requiring reliable overcurrent protection.
3CU15R
Altech
The Altech 3CU15R Circuit Breaker is rated for 480V AC with a current of 15A. Featuring thermal magnetic protection and a breaking capacity of 5000A, it is ideal for DIN rail mounting in industrial applications. With an IP20 rating and operating temperatures from -20°C to 60°C, it ensures reliable circuit protection in various environments.
MG1-B-32-410-1-CC1-B-C
Carling Technologies
Carling Technologies' MG1-B-32-410-1-CC1-B-C is a 125V, 1A circuit breaker with chemical/corrosion/moisture resistance. Featuring an illuminated rocker actuator and quick connect terminals, it has a rated breaking capacity of 1000A. Ideal for panel mounting in applications requiring series trip circuit protection.
FAZ-C15/3-RT
The Eaton Corporation FAZ-C15/3-RT is a 15A thermal magnetic circuit breaker with a rated AC voltage of 480V. Featuring a trip-free circuit function, it has a rated breaking capacity of 14000A and operates within temperatures ranging from -25°C to 75°C. Ideal for DIN rail mounting, this circuit breaker is suitable for various applications requiring reliable overcurrent protection.
FAZ-C5/1-NA-SP
FAZ-C5/1-NA-SP by Eaton Corporation is a 1-pole circuit breaker with a rated AC voltage of 277V and a rated current of 5A. It features thermal magnetic circuit protection and a toggle actuator, making it suitable for manual on/off control in various applications.
2CCP814001R1849
Abb
THERMAL MAGNETIC; Manufacturer Series: 2CCP814001R1849;
CM-3
The Sensata Technologies CM-3 is a 3A thermal circuit breaker with 120V AC and 30V DC ratings. Featuring corrosion-resistant design, it has a manual reset actuator and trip-free function for panel mounting applications. Compliant with UL standards, it offers reliable circuit protection in various environments.
3TC7-10
THERMAL CIRCUIT BREAKER; Manufacturer Series: 3TC7;
4400.0008
Schurter Ag
4400.0008 by Schurter Ag is a 1A thermal circuit breaker with a rated AC voltage of 240V and rated breaking capacity of 2000A. It features a reset button actuator, quick connect terminals, and IP40 environmental protection. Ideal for panel mount-threaded applications requiring trip-free circuit protection in various industries.
W23-X1A1G-50
TE Connectivity's W23-X1A1G-50 is a 240V thermal circuit breaker with 50A rated current and 1000A breaking capacity. Featuring a push-pull actuator, it has a trip time of 6s and is corrosion/moisture resistant. Ideal for panel mounting in applications requiring series trip circuit protection.
1410-L210-L2F1-S02-5A
E-t-a Elektrotechnische Apparate
1410-L210-L2F1-S02-5A by E-t-a Elektrotechnische Apparate is a 5A thermal circuit breaker with a rated AC voltage of 240V. It features corrosion-resistant body, printed circuit board terminal shape, and reset slide actuator type. Ideal for applications requiring reliable circuit protection in environments with temperatures ranging from -20°C to 70°C.
FAZ-D15/3-NA
The Eaton Corporation FAZ-D15/3-NA is a 15A thermal magnetic circuit breaker with a rated AC voltage of 277V. Featuring snap-on terminals and toggle actuator, it has a high breaking capacity of 10kA. Ideal for DIN rail mounting, this 3-pole breaker offers manual on/off control in various industrial applications.
24205
Schneider Electric Sa
THERMAL MAGNETIC;
1410-L210-L2F1-S02-2A
1410-L210-L2F1-S02-2A by E-t-a Elektrotechnische Apparate is a 2A thermal circuit breaker with a rated AC voltage of 240V. It features corrosion-resistant body, printed circuit board terminal shape, and silver terminal finish. Ideal for applications requiring reliable circuit protection in environments with temperatures ranging from -20°C to 70°C.
279-2-1-52-9-2-90
Sensata Technologies' 279-2-1-52-9-2-90 is a moisture-resistant circuit breaker with quick connect terminals. It has a rated current of 90A, breaking capacity of 5000A, and DC voltage rating of 160V. Ideal for panel mounting applications requiring trip-free operation in environments where moisture resistance is crucial.
5SY4106-7
Siemens
Siemens 5SY4106-7 is a 6A thermal circuit breaker with 400V AC voltage rating. It offers a rated breaking capacity of 5000A and operates b/w -25°C to 55°C. Designed for DIN rail mounting, it is ideal for trip circuit protection in various applications.
MS25244-10
Sensata Technologies' MS25244-10 is a 10A thermal circuit breaker with 120V AC and 30V DC ratings. Featuring trip-free functionality, it has a rated breaking capacity of 3500A and operates with a 1s trip time delay. This panel-mount device is corrosion/moisture resistant, making it ideal for various circuit protection applications.
LELH11-1-62-15.0-01-V
LELH11-1-62-15.0-01-V by Sensata Technologies is a 240V, 15A magnetic circuit breaker with a rated breaking capacity of 5000A. Featuring a toggle handle actuator and trip-free circuit function, it is corrosion/moisture resistant and suitable for panel mount applications meeting CCC and VDE standards.
4435.0013
Schurter Ag's 4435.0013 is a 20A thermal circuit breaker with a rated AC voltage of 240V and IP40 environmental protection. Featuring quick connect terminals, it has a trip-free circuit function and operates b/w -30°C to 60°C. Ideal for panel mounting in various applications requiring reliable overcurrent protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved