Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Siba 7012540.1,6 fuse: Rated 1.6A current, 700V AC voltage, and 500V DC voltage. Very fast blow characteristic for electric circuit protection in bulk packaging. Dimensions of 6.35mm x 31.8mm make it suitable for inline mounting applications.
Median Price
$1.612
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Beyond Components
TME
$3.170
$2.320
Nova Conductors
$5.180
Schukat
$0.840
$0.731
$0.698
Vyrian
Aranea Global
$5.076
$4.873
Continental Prestige Electronics
Bastille Electronics
$4.921
$4.675
$4.610
AZTECH Wire
$16.946
Argo Parts USA
Perfect Parts
Authorized Procurement Solutions
This fuse has a low joule integral which means it can quickly absorb excess energy without causing damage to the connected equipment.
With a high rated AC voltage, this fuse is suitable for use in a variety of electrical systems without the risk of voltage overload.
The compact size of this fuse makes it easy to install in tight spaces without compromising on performance.
The end cap terminal shape ensures a secure connection, reducing the risk of accidental disconnection or damage.
The high rated current makes this fuse suitable for protecting circuits with higher power loads.
With a very fast blow characteristic, this fuse can quickly respond to overcurrent conditions, providing reliable protection to the connected system.
The high breaking capacity of this fuse ensures that it can safely interrupt high fault currents without causing damage.
With a high rated DC voltage, this fuse is suitable for use in DC circuits without the risk of voltage overload or damage.
The inline/holder mounting feature makes it easy to securely mount the fuse in place, ensuring proper protection within the circuit.
This fuse complies with industry standards set by CUL and UL, ensuring high quality and safety standards are met.
Fuses 7012540.1,6 attributes and parameters. Explore more Fuses devices from Siba
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
7012540.1,6 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Uniohm
First Components International
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
Goodwork Semiconductor
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Crimson Semiconductor
261
Deltrol Controls
Other Relays;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
FNQ-R-1
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
GMA-1-R
Eaton Corporation
GMA-1-R fuse by Eaton Corporation is a 5x20mm fast blow electric fuse with a rated current of 1A and voltage of 250V. With a nominal joule integral of 0.48J, it offers circuit protection in applications requiring inline mounting or holder installation. Compliant with CSA, PSE, and UL standards, it ensures reliable performance in various electrical systems.
DFJ-175
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 450 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE;
0287030.PXCN
Littelfuse
0287030.PXCN by Littelfuse is a 30A electric fuse with a rated breaking capacity of 1000A. It has a trip time of 0.08s and can handle a max operating temperature of 125°C. This fuse is commonly used for circuit protection in various applications.
LPJ-50SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 50 A; Terminal Shape: END CAP;
KTK-R-1/2
The Eaton Corporation KTK-R-1/2 fuse, rated at 0.5A and 600V, features fast blow characteristic with a body length of 10.3mm and diameter of 38.1mm. Designed for circuit protection in applications requiring high breaking capacity up to 200kA, it is suitable for use in CE, CSA, and UL compliant systems with inline mounting capability.
S320383
Mersen S A
Mersen S A's S320383 fuse offers 19500 J nominal joule integral, 690 V rated AC voltage, and 400 A rated current. With ultra-fast blow characteristic, it provides electric circuit protection with a high breaking capacity of 170000 A. Ideal for inline mounting applications in CSA, IEC, and UL standards.
KLDR015TXP
KLDR015TXP by Littelfuse is a 15A time delay fuse with 200.5J nominal joule integral, suitable for electric circuit protection at 600V AC and 300V DC. With a trip time of 12s, it has a rated breaking capacity of 200kA, making it ideal for inline mounting applications in various industries.
0ATO07.5V
Littelfuse 0ATO07.5V fuse with 7.5A rated current, 60J nominal joule integral, and 0.1s trip time is ideal for electric circuit protection. With a rated breaking capacity of 1000A and operating temperatures from -40°C to 125°C, it suits various applications requiring inline mounting in CSA/UL compliant systems.
JKS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 40 A; Terminal Shape: END CAP; Dimensions: 27mm x 60.3mm;
BK/ABC-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: END CAP;
170M3744
The Eaton Corporation 170M3744 fuse offers 5150J nominal joule integral and 1300V rated AC/DC voltage for circuit protection. With a rated current of 200A and breaking capacity of 100kA, it is ideal for inline mounting in various applications requiring high-level electrical protection.
BK/ATM-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 15 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
FWP-50A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: END CAP;
LP-CC-1/2
Eaton Corporation LP-CC-1/2 fuse, rated 0.5A and 600V AC/300V DC, with time delay blow characteristic. Inline/holder mounting feature, CE/CSA/UL standards compliant for electric circuit protection applications. Dimensions: 10.3mm x 38.1mm with end cap terminal shape.
0437002.WR
Littelfuse 0437002.WR fuse, rated at 63V and 2A, offers fast blow characteristic with trip time of 1s. With dimensions of 3.2mm x 1.63mm x 0.82mm, it is ideal for circuit protection in applications requiring surface mount fuses with high breaking capacity up to 50A.
SP/LPJ-100SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
ATM-25
Eaton Corporation's ATM-25 fuse, with 25A rated current and 32V rated voltage, features fast blow characteristic. Measuring 10.92mm x 3.81mm x 8.81mm, it is used for electric circuit protection in various applications like automotive and industrial equipment due to its high breaking capacity of 1000A and UL reference standard compliance.
AJT50
AJT50 fuse by Mersen S A is a 50A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. With dimensions of 27mm x 60mm, it features an end cap terminal shape and inline/holder mounting for circuit protection applications requiring a high breaking capacity of 200000A.
0297005.H
Littelfuse 0297005.H is a MINI fuse with 5A rated current, 37J nominal joule integral, and 0.03s trip time. It has a rated voltage of 32V and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and pre arcing rating of 25 A2/s.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
7012540.5
Siba
Siba 7012540.5 is a 5A electric fuse with a rated AC voltage of 600V and a blow characteristic of VERY FAST. It has dimensions of 6.35mm x 31.8mm and is commonly used for circuit protection in inline/holder mounting applications.
7012540.5IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 5 A; Terminal Shape: END CAP;
7012540.0,5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP;
7012540.4
Siba 7012540.4 fuse with 5J joule integral, 600V AC voltage rating, and 4A current is ideal for electric circuit protection. Featuring very fast blow characteristic, it has a rated breaking capacity of 50kA and nickel terminal finish. Commonly used in applications requiring inline mounting or holder setup.
7012540.1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP;
7012540.16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 16 A; Terminal Shape: END CAP; Reference Standard: CUL; UL;
7012540.0,5IP
7012540.0,125IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: .125 A; Terminal Shape: END CAP;
7012540.0,125
7012540.8IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 8 A; Terminal Shape: END CAP; Nominal Joule Integral: 6.5 J;
7012540.3,15IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 3.15 A; Terminal Shape: END CAP;
7012540.10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Reference Standard: CUL; UL;
7012540.25
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 25 A; Terminal Shape: END CAP; Reference Standard: CUL; UL;
7012540.0,1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: .1 A; Terminal Shape: END CAP;
7012540.2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 2 A; Terminal Shape: END CAP;
7012540.0,63
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: .63 A; Terminal Shape: END CAP;
7012540.0,8IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: .8 A; Terminal Shape: END CAP;
7012540.1,6IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
7012540.6,3IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 6.3 A; Terminal Shape: END CAP;
7012540.8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 8 A; Terminal Shape: END CAP; Blow Characteristic: VERY FAST;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved