Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Siba 179020.2,5 fuse has a rated current of 2.5A and nominal joule integral of 11J, suitable for circuit protection with a blow characteristic of VERY FAST. With a rated AC voltage of 250V, it is designed in size 5x20mm for inline mounting applications with a min pre arcing time of 20ms.
Median Price
$0.105
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Schukat
1+ parts
-
100+ parts
$0.118
1k+ parts
$0.090
10k+ parts
$0.084
Vyrian
Micros
Partservice
$0.103
Nova Conductors
Aztec Data Supply Inc.
$6.070
AZTECH Wire
$18.010
$17.300
$16.950
$16.610
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Higher joule rating means better protection against power surges and spikes, making this fuse a reliable choice for protecting your equipment.
Suitable for use in standard household and industrial electrical systems, providing versatile protection across different applications.
Compact size allows for easy installation in tight spaces, making it ideal for various electronic devices and equipment.
Designed to handle currents up to 2.5A, ensuring effective protection while maintaining compatibility with a wide range of electrical devices.
The very fast blow characteristic ensures rapid response to overcurrent conditions, helping to prevent damage to connected equipment.
Can be easily mounted in-line or in a fuse holder, offering flexibility in installation options to suit different setups and configurations.
Fuses 179020.2,5 attributes and parameters. Explore more Fuses devices from Siba
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
179020.2,5 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
MC33269T-3.3G
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Tak Cheong Electronics Holdings
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
BSS138
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
SPFJ160.XXL
Littelfuse
SPFJ160.XXL by Littelfuse is a midget fuse with a rated current of 160 A and a rated breaking capacity of 20000 A. It is designed for circuit protection in applications requiring an electric fuse, such as inline or holder mounting in CE, IEC, and UL reference standard compliant systems.
PV-20A10F
Eaton Corporation
Eaton Corporation's PV-20A10F fuse, rated at 20 A and 1000 V DC, offers a nominal joule integral of 34 J with a body size of 10x38mm. With a rated breaking capacity of 50000 A, it is suitable for circuit protection in various applications due to its wide operating temperature range (-40 to 90 °C) and compliance with CCC, IEC, and UL standards.
326.800
326.800 by Littelfuse is an electric fuse with a rated current of 0.8 A and a blow characteristic of SLOW. It has a nominal joule integral of 8.2 J and is suitable for circuit protection in applications requiring a rated AC voltage of 250 V.
FNQ-R-20
Eaton Corporation's FNQ-R-20 fuse, rated at 20A and 600V, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline/holder mounting configurations for electrical systems.
0219002.MXAEP
Littelfuse 0219002.MXAEP fuse, rated at 2A and 250V, offers a time lag blow characteristic with a trip delay of 0.02s. With a nominal joule integral of 92.705J, it is ideal for circuit protection in applications requiring an electric fuse with dimensions of 5x20mm and terminal shape PIN WIRE.
BK/ATC-25
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 25 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
0ATO020.V
0ATO020.V fuse by Littelfuse has a rated current of 20A, trip time of 0.1s, and nominal joule integral of 520J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and min operating temperature of -40°C. The fuse features TAB/BLADE terminals and a rated breaking capacity of 1000A.
ATDR12
Mersen S A
The Mersen S A ATDR12 fuse is a 12A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200kA.
FRS-R-100
Eaton Corporation's FRS-R-100 fuse, rated at 100A and 600V AC/DC, features a time delay blow characteristic. With a compact body size of 34mm x 200mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
0217005.MXP
Littelfuse 0217005.MXP fuse, rated 5A at 250V, with trip time of 0.01s. Ideal for circuit protection in applications requiring very fast blow characteristic. Dimensions: 5x20mm, terminal shape: end cap, and reference standards include BSI, CCC, CE, UL.
LPJ-10SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
FWP-40A14F
Eaton Corporation's FWP-40A14F fuse offers 84J nominal joule integral, 700V AC/DC rated voltage, and 40A current. Ideal for electric circuit protection in various applications with a breaking capacity of 200kA. Measuring at 14.3mm x 50.8mm, it features end cap terminals and complies with IEC and UL standards for reliable performance.
ANN-500
Eaton Corporation's ANN-500 fuse is a 500A electric fuse with very fast blow characteristic. It has a rated AC voltage of 125V and rated breaking capacity of 2500A. Ideal for surface mount applications, it features built-in indicator and meets CSA and UL standards.
37006300410
Littelfuse 37006300410 TR5 fuse with 0.63A rated current, 250V AC voltage, and 0.02s trip time. Fast blow characteristic for circuit protection in various applications. Dimensions of 8.5mm x 8mm and rated breaking capacity of 35A make it suitable for through-hole mounting.
0251001.NRT1L
Littelfuse 0251001.NRT1L PICO fuse, rated at 125V/1A with 0.004s trip time. Very fast blow characteristic, suitable for electric circuit protection. Dimensions of 2.8mm x 7.11mm make it ideal for through-hole mounting in various applications.
0452001.MRL
Littelfuse 0452001.MRL fuse, rated at 125V, offers a slow blow characteristic with a trip time of 0.002s. With dimensions of 6.1mm x 2.69mm x 2.69mm and a nominal joule integral of 1.98J, it is ideal for circuit protection in applications requiring a nano-sized surface mount electric fuse with WRAPAROUND terminals.
0218.063MXP
Littelfuse 0218.063MXP fuse, rated at 0.063A and 250V, features a time lag blow characteristic with a trip delay of 0.01s. With dimensions of 5x20mm, it is commonly used for circuit protection in applications requiring a max operating temperature of 125°C.
ATM-15
Eaton Corporation's ATM-15 fuse, with 15A rated current and 32V rated voltage, is a fast blow electric fuse suitable for circuit protection. Measuring 10.92mm x 3.81mm x 8.81mm, it has a silver terminal finish and UL reference standard compliance. Ideal for inline mounting applications, it offers a max operating temperature of 100°C and a rated breaking capacity of 1000A.
KTK-R-1
KTK-R-1 fuse by Eaton Corporation is a 1A, 600V fast blow electric fuse with a rated breaking capacity of 200kA. It has a compact body size of 10.3mm x 38.1mm and is commonly used for circuit protection in inline or holder mounting applications.
0297005.H
Littelfuse 0297005.H is a MINI fuse with 5A rated current, 37J nominal joule integral, and 0.03s trip time. It has a rated voltage of 32V and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and pre arcing rating of 25 A2/s.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
179020.1
Siba
Siba 179020.1 is a 5x20mm fuse with a rated current of 1A and rated voltage of 250V. It has a very fast blow characteristic and a nominal joule integral of 1.5J, making it suitable for circuit protection in various applications.
179020.2,5IP
Siba 179020.2,5IP fuse has a rated current of 2.5A and nominal joule integral of 11J, with a blow characteristic of VERY FAST. It is used for circuit protection at 250V AC voltage, with a rated breaking capacity of 35A and body size of 5x20mm for INLINE/HOLDER mounting applications.
179020.5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Packing Method: BULK;
179020.0,16AK
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .16 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
179020.0,4AK
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .4 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
179020.0,4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .4 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
179020.0,63FC
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
179020.0,63IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: END CAP; Blow Characteristic: VERY FAST;
179020.0,7
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .7 A; Terminal Shape: END CAP; Nominal Joule Integral: .56 J;
179020.10AK
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 10 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
179020.1,25FC
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Body Height: 20 mm;
179020.1,6FC
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.6 A; Terminal Shape: END CAP; Reference Standard: BEAB, SEMKO, UL, VDE;
179020.1AK
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Nominal Joule Integral: 1.5 J;
179020.2,5AK
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
179020.2,5FC
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Reference Standard: BEAB, SEMKO, UL, VDE;
179020.2IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BULK;
179020.3,15FC
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Minimum Pre Arcing Time: 20 ms;
179020.3,15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Packing Method: BULK;
179020.5AK
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Reference Standard: BEAB, SEMKO, UL, VDE;
179020.5IP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved