Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT SSR; Height: 21.6 mm; Control Voltage: 4 V; Control Current: .013 A; Maximum Operating Temperature: 80 Cel; Output Circuit Type: Back to Back SCR;
Median Price
$125.365
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
< 1k
RS (Exports)
1+ parts
$73.440
100+ parts
-
1k+ parts
10k+ parts
Farnell
$123.900
Verical
$126.830
$120.270
RS Americas
$129.800
Chip1Stop
$133.000
PEI Genesis
Master Electronics
$109.990
$107.780
Rapid Electronics
$107.578
Nova Conductors
$108.810
Vyrian
IBS Electronics
Aztec Data Supply Inc.
$0.040
Advanced Electronics
$0.323
$0.294
$0.265
AZTECH Wire
$14.520
$13.950
$13.670
$13.390
Corohmni
$105.310
Aranea Global
$106.634
$102.368
Continental Prestige Electronics
Allen Electronics Distributors
$123.620
Neutron USA
$203.960
Argo Parts USA
Solid State Relays D2440DH attributes and parameters. Explore more Solid State Relays devices from Sensata Technologies
Control Current:
Control Voltage:
Input Type:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Output Circuit Type:
Height:
Length:
Sub-Category:
D2440DH Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
Sensata Technologies is a global industrial technology company striving to create a cleaner, more efficient, electrified and connected world. Through our broad portfolio of sensors, electrical protection components and sensor-rich solutions which create valuable business insights, we help our customers address increasingly complex engineering and operating performance requirements. In fact, our name Sensata comes from the Latin word sensate or ‘those gifted with sense’. Our focus on sensing is also reflected in our logo, which spells Sensata in Braille. Sensata Technologies is a leading industrial technology company that develops sensors, sensor-based solutions, including controllers and software, and other mission-critical products to create valuable business insights for customers and end users. For more than 100 years, Sensata has provided a wide range of customized, sensor-rich solutions that address complex engineering requirements to help customers solve difficult challenges in the automotive, aircraft, industrial, heavy vehicle, off-road, HVAC and marine industries. With more than 21,000 employees and operations in 16 countries, Sensata’s solutions help to make products safer, cleaner and more efficient, electrified, and connected.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
EU2B-YS3303C
Idec
ROTARY SWITCH;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Good-ark Electronics
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CPC1988J
Littelfuse
CPC1988J by Littelfuse is a SINGLE configuration SSR with 0.1A max forward current, 2.5 ohm on-state resistance, and 2500V isolation voltage. Ideal for applications requiring TRANSISTOR OUTPUT SSRs in temperatures ranging from -40 to 85 °C.
A2410
Crydom
The Crydom A2410 is a solid state relay with complex configuration, trigger output SSR optoelectronic type, and back to back SCR output circuit. It operates at -40 to 80°C, has 90V control voltage, and can handle up to 50A on-state current. Ideal for AC input applications requiring high isolation voltage of 4000V in a compact design measuring 58.4mm x 22.9mm.
TLP170D(F)
Toshiba
Toshiba's TLP170D(F) is a Solid State Relay with 0.002A control current, MOSFET output circuit type, and 65°C max operating temp. Ideal for DC input applications in compact spaces due to its 2.1mm height and 4.4mm length, offering reliable performance from -20°C to 65°C.
DC200D40
Sensata Technologies
TRANSISTOR OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; Maximum On State Resistance: .024 ohm; Maximum Isolation Voltage: 2500 V; No. of Elements: 1;
TLP241A(TP1,F(O
TRANSISTOR OUTPUT SSR;
TLP3407S(TP,E(O
SPF240D25
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 4000 V; No. of Elements: 1; Additional Features: UL APPROVED; Minimum Operating Temperature: -30 Cel;
VO14642AT
VO14642AT by Vishay Intertechnology is a SINGLE MOSFET SSR with 0.05A forward current, 2A on-state current, and 5300V isolation voltage. Ideal for DC input applications requiring low on-state resistance (0.07 ohm) and control voltage of 1V. Operating temperature range from -40 to 85°C makes it suitable for various industrial uses.
LCA110LS
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Additional Features: HIGH RELIABILITY, UL RECOGNIZED, CMOS COMPATIBLE; Control Voltage: .9 V; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 3750 V;
TS190P
IXYS Corporation's TS190P is a single solid state relay with optocoupler AC input and transistor output. It has a control current of 0.005 A, max forward current of 0.05 A, and max operating temp of 85°C. Ideal for applications requiring high isolation voltage (3750 V) and low on-state resistance (22 ohm), such as industrial automation systems.
CPC1966Y
TRIGGER OUTPUT SSR; Maximum Forward Current: .05 A; Additional Features: CMOS COMPATIBLE, UL RECOGNIZED, ZERO VOLTAGE CROSSING; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum On State Current: 3 A;
SSR-240A50
TE Connectivity
TE Connectivity's SSR-240A50 is a COMPLEX solid state relay with trigger output. It supports max on-state current of 50A and has isolation voltage of 4000V. Ideal for chassis mounting applications, operating b/w -30°C to 80°C.
CX240D5R
TRIGGER OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Length: 43.1 mm; No. of Elements: 1; Height: 25.4 mm; Additional Features: UL RECOGNIZED, VDE APPROVED;
ASO241
TRIGGER OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Length: 24.1 mm; Minimum Operating Temperature: -30 Cel; No. of Elements: 1;
G3VM-41GR5
Omron
Omron's G3VM-41GR5 is a single solid state relay with max. forward current of 0.03A and optoelectronic transistor output SSR type. It operates b/w 25°C to 60°C, has max. on-state resistance of 1.5Ω, isolation voltage of 1500V, and max. on-state current of 0.3A. Ideal for applications requiring precise switching in industrial automation systems.
HD60125
The Crydom HD60125 is a solid state relay with a max on-state current of 125A and control voltage of 3V. With optoelectronic trigger output, it operates b/w -40°C to 80°C making it suitable for DC input applications requiring high isolation voltage up to 4000V.
A1240
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn); Input Type: AC; Height: 22.9 mm; Configuration: SINGLE WITH BUILT-IN RESISTOR; Additional Features: UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING;
AQW214
Panasonic
AQW214 by Panasonic is a solid state relay with 2 separate elements. It has a max forward current of 0.05A and an optoelectronic type of transistor output SSR. With a max operating temperature of 85°C, it is ideal for applications requiring high isolation voltage and low on-state resistance.
PVT322APBF
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Maximum On State Resistance: 10 ohm; Length: 9.3 mm; Additional Features: UL RECOGNIZED, HIGH RELIABILITY; Output Circuit Type: MOSFET;
CPC1918J
CPC1918J by Littelfuse is a SINGLE solid state relay with 0.1A max forward current and 5.25A max on-state current. It has a TRANSISTOR OUTPUT SSR optoelectronic type, 0.1 ohm max on-state resistance, and 2500V max isolation voltage. Ideal for applications requiring reliable switching in temperatures ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
D2440D
Crydom's D2440D is a solid state relay with 2 separate elements, each with built-in snubber. It has a max on-state current of 40A and isolation voltage of 4000V. Ideal for applications requiring trigger output SSRs in temperatures ranging from -40°C to 80°C.
Hbcontrols
TRIGGER OUTPUT SSR; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; Maximum Isolation Voltage: 4000 V; No. of Elements: 2;
TRIGGER OUTPUT SSR; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Additional Features: UL APPROVED, VDE APPROVED, WITH ZERO CROSS OVER CIRCUIT; Maximum On State Current: 40 A;
D2440D-10
The Crydom D2440D-10 is a solid state relay with 2 separate elements, each with a built-in snubber. It has a max on-state current of 40A and isolation voltage of 4000V. Ideal for applications requiring trigger output SSRs in temperatures ranging from -40°C to 80°C.
TRIGGER OUTPUT SSR; Additional Features: UL APPROVED, VDE APPROVED; Maximum On State Current: 40 A; Maximum Isolation Voltage: 4000 V; No. of Elements: 2; Minimum Operating Temperature: -40 Cel;
TRIGGER OUTPUT SSR; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; No. of Elements: 2; Maximum On State Current: 40 A; Maximum Operating Temperature: 80 Cel; Additional Features: UL APPROVED, VDE APPROVED;
D2440DE-10
The Crydom D2440DE-10 is a solid state relay with separate configuration and 2 elements. It has a max on-state current of 40A and can operate in temperatures ranging from -40°C to 80°C. It is commonly used as a trigger output SSR in various applications.
TRIGGER OUTPUT SSR; Maximum On State Current: 40 A; No. of Elements: 2; Additional Features: UL APPROVED, VDE APPROVED; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Maximum Operating Temperature: 80 Cel;
TRIGGER OUTPUT SSR; No. of Elements: 2; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Maximum Operating Temperature: 80 Cel; Maximum On State Current: 40 A; Additional Features: UL APPROVED, VDE APPROVED;
D2440DE
TRIGGER OUTPUT SSR; Additional Features: UL APPROVED, VDE APPROVED, WITH ZERO CROSS OVER CIRCUIT; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER; Maximum On State Current: 40 A; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel;
TRIGGER OUTPUT SSR; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -40 Cel; No. of Elements: 2; Maximum Isolation Voltage: 4000 V; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN SNUBBER;
TRIGGER OUTPUT SSR; Additional Features: UL APPROVED, VDE APPROVED, WITH ZERO CROSS OVER CIRCUIT; Maximum On State Current: 40 A; Minimum Operating Temperature: -40 Cel; No. of Elements: 2; Maximum Operating Temperature: 80 Cel;
D2440DH
TRIGGER OUTPUT SSR; Control Voltage: 4 V; Minimum Operating Temperature: -40 Cel; Length: 58.4 mm; Control Current: .013 A; Output Circuit Type: Back to Back SCR;
D2440DH-10
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Control Voltage: 4 V; Length: 58.4 mm; Control Current: .013 A; No. of Elements: 2;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Height: 21.6 mm; No. of Elements: 2; Additional Features: IEC-62314, UL RECOGNIZED; Maximum On State Current: 40 A;
D2440DEH-10
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Additional Features: IEC-62314, UL RECOGNIZED; Control Current: .015 A; Control Voltage: 15 V; Maximum Isolation Voltage: 4000 V;
D2440DEH
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Length: 58.4 mm; Output Circuit Type: SCR; Input Type: DC; No. of Elements: 2;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum Isolation Voltage: 4000 V; Minimum Operating Temperature: -40 Cel; Control Voltage: 15 V; Maximum On State Current: 40 A;
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Configuration: SEPARATE, 2 CHANNELS; Additional Features: IEC-62314, UL RECOGNIZED; Minimum Operating Temperature: -40 Cel; Input Type: DC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved