Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Schurter Ag 3403.0158.24 fuse is a time lag electric fuse with 0.16A rated current and 125V DC voltage, suitable for circuit protection in various applications. With dimensions of 10.1mm x 3mm x 3mm and a rated breaking capacity of 200A, it offers reliable performance at temperatures ranging from -55°C to 125°C. The WRAPAROUND terminal shape and surface mounting feature make it easy to install in different electronic devices.
Median Price
$0.655
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.595
100+ parts
1k+ parts
10k+ parts
-
Mouser Electronics
$0.650
$0.608
$0.607
DigiKey
$0.660
Verical
$1.103
Future Electronics
$0.645
Arrow
$0.876
Nova Conductors
$0.583
Vyrian
Rutronik
$0.387
NAC Semi
$0.918
VNN
Ampacity Inc.
$0.510
Semicontronic
$0.497
$0.495
Continental Prestige Electronics
$0.571
Argo Parts USA
$0.566
Advanced Electronics
Corohmni
$0.619
Aztec Data Supply Inc.
$3.682
Netroflash
$0.554
$0.542
Provides efficient protection against power surges and electrical overloads.
Suitable for use in standard household electrical systems.
Compact size for fitting in tight spaces or small electrical devices.
Ensures secure and reliable electrical connections.
Can handle high temperatures without compromising performance.
Provides delayed response to overloads, allowing for temporary surges in current.
Essential for protecting electrical circuits from damage due to excessive current.
Capable of safely interrupting higher currents to prevent damage to equipment.
Suitable for use in direct current applications.
Easy to install on circuit boards or other surfaces.
Fuses 3403.0158.24 attributes and parameters. Explore more Fuses devices from Schurter Ag
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Minimum Pre Arcing Time:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
3403.0158.24 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
The SCHURTER Group is the world's leading Swiss technology company ensuring a clean and safe supply of power, ease of use, and sophisticated overall solutions. As a leading innovator, SCHURTER manufactures and distributes components for circuit protection, as well as connectors, switches, and EMC products. In close cooperation with the customers, input systems are developed and manufactured. SCHURTER also offers services for the electronics industry in the field of the printed circuit board assembly. The business unit Solutions coordinates complete solutions from project planning to the manufacture of end products. 20 companies in 17 countries belong to the SCHURTER Group, 14 companies of which have their own production sites. This ensures that all major markets can be served by their own companies. They are coordinated from three hubs: SCHURTER AG in Lucerne for Europe, SCHURTER Inc. in Santa Rosa for America as well as SCHURTER (S) Pte. Ltd. in Singapore for Asia. In addition, SCHURTER has representatives in about 60 countries and works together with over 200 distributors. This close-knit network guarantees that SCHURTER products are securely and quickly available internationally.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
SS14
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ROHM
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
FRS-R-60
Eaton Corporation
Eaton Corporation's FRS-R-60 fuse, rated at 600V AC/DC and 60A, features a time delay blow characteristic. With a compact body size of 27mm x 139.7mm, it is suitable for inline mounting applications requiring electric circuit protection. Compliant with CE, CSA, and UL standards, this RK5 class fuse has a high breaking capacity of 200kA.
ATC-30
Eaton Corporation's ATC-30 fuse, rated at 30A and 32V, offers fast blow characteristic with a trip time of 0.1s. With dimensions of 19.3mm x 5.25mm x 12.5mm, it is ideal for electric circuit protection in applications requiring a max operating temperature of 100°C and UL reference standard compliance.
AJT60
Mersen S A
AJT60 fuse by Mersen S A is a 60A time delay electric fuse with a rated AC voltage of 700V and rated DC voltage of 400V. It features a body size of 27mm x 60mm, end cap terminal shape, and inline/holder mounting feature. Ideal for circuit protection in applications requiring high breaking capacity up to 200kA.
0451.062MRL
Littelfuse
0451.062MRL by Littelfuse is a NANO fuse with 0.062A rated current and 125V DC voltage. It has a very fast blow characteristic, suitable for electric circuit protection in applications requiring surface mounting feature.
LP-CC-25
LP-CC-25 fuse by Eaton Corporation is a time delay electric fuse with a rated current of 25 A and a rated AC voltage of 600 V. It is commonly used for circuit protection in applications such as inline or holder mounting.
BK/ATM-20
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 20 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATM;
0BLS001.T
Littelfuse 0BLS001.T fuse rated at 1A, 600V AC with fast blow characteristic. Ideal for electric circuit protection with 10x35mm size and CSA/UL standards compliance.
37001600430
Littelfuse 37001600430 fuse, rated at 0.16A and 250V, with fast blow characteristic. Ideal for circuit protection in various applications due to its compact TR5 size and high breaking capacity of 35A. Operating temperature range from -40°C to 85°C makes it suitable for diverse environments.
BK/MDL-5-R
Cooper Electronic Technologies
BK/MDL-5-R by Cooper Electronic Technologies is a 5A time delay electric fuse with a rated AC voltage of 250V. It has a nominal joule integral of 32J and a rated breaking capacity of 200A. This fuse is commonly used for circuit protection in applications requiring inline mounting or holder installation.
SP/LPJ-400SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
FNQ-R-1-4/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.4 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
KTK-R-1/10
The Eaton Corporation's KTK-R-1/10 fuse, rated at 0.1A and 600V AC, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for electric circuit protection, it has a high breaking capacity of 200kA and is suitable for inline mounting applications per CE, CSA, and UL standards.
0225002.MXP
0225002.MXP fuse by Littelfuse is a 2A, 250V fast-acting electric fuse with a rated breaking capacity of 100A. It has a trip time of 1s and nominal joule integral of 2.18J, suitable for circuit protection in various applications requiring quick response to overcurrent situations. Compliant with CE, CSA, PSE, and UL standards, it features nickel terminal finish and compact dimensions of 4.5mm x 14.48mm for easy installation in inline/holder mounting setups.
FNQ-R-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
0697-0315-01
Bel Fuse
Bel Fuse 0697-0315-01 is a MICRO fuse with 0.315A rated current and 0.6J nominal joule integral. It operates at 250V AC, has time lag blow characteristic, and matte tin terminal finish. Ideal for circuit protection in applications requiring through hole mounting and rated breaking capacity of 35A.
ATM-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
FWP-50A22F
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 500 V; Rated Current: 50 A; Terminal Shape: END CAP;
FNQ-R-30
Eaton Corporation's FNQ-R-30 fuse, rated at 30A and 600V AC/300V DC, features a time delay blow characteristic. With a CC class and nickel terminal finish, it offers a high breaking capacity of 200kA. Ideal for electric circuit protection in various applications with CE, CSA, and UL standards compliance.
BK-AGC-10-R
The Eaton BK-AGC-10-R fuse, rated at 10A and 250V, with dimensions of 6.3x32mm, is a fast blow electric fuse suitable for circuit protection in various applications. It has a nominal joule integral of 486J and a rated breaking capacity of 200A, meeting CSA and UL standards. The fuse operates b/w -55°C to 125°C temperature range with pre-arcing rating of 0.492 A2/s.
LP-CC-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3403.0271.23
Schurter Ag
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 277 V; Rated DC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
3403.0266.23
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 277 V; Rated DC Voltage: 250 V; Rated Current: .16 A; Terminal Shape: WRAPAROUND;
3403.0176.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 10 A; Terminal Shape: WRAPAROUND;
3403.0019.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
3403.0166.24
Schurter Ag's 3403.0166.24 fuse, rated at 1A and 250V, features a time lag blow characteristic with dimensions of 10.1mm x 3mm x 3mm. Suitable for electric circuit protection in various applications due to its high breaking capacity of 200A and wide temperature range from -55°C to 125°C.
3403.0277.23
The Schurter Ag 3403.0277.23 fuse is a time lag electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a nominal joule integral of 9.6J and is suitable for circuit protection in applications requiring a rated AC voltage of 277V and rated DC voltage of 250V.
3403.0155.24
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: WRAPAROUND;
3403.0169.24
3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.
3403.0176.24
3403.0166.11
Schurter Ag's 3403.0166.11 fuse, with 1A current rating and 250V AC voltage, offers time lag blow characteristic and 2.8J nominal joule integral. Ideal for electric circuit protection in various applications due to its compact size of 3x10.1mm and surface mounting feature.
3403.0286.23
Schurter Ag's 3403.0286.23 fuse has a rated current of 16A and nominal joule integral of 650J, suitable for circuit protection in applications requiring a time lag blow characteristic. With a rated AC voltage of 250V and max operating temperature of 125°C, it is ideal for surface mount installations in various electronic devices.
3403.0274.23
Schurter Ag's 3403.0274.23 fuse has a rated current of 1A, rated AC voltage of 277V, and nominal joule integral of 3.6J. With dimensions of 15.4mm x 5.35mm x 5.35mm, it is ideal for circuit protection in applications requiring a time lag blow characteristic at temperatures ranging from -55°C to 125°C.
3403.0275.23
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 277 V; Rated DC Voltage: 250 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
3403.0013.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
3403.0271.11
The Schurter Ag 3403.0271.11 fuse is a time lag electric fuse with 0.5A rated current and 277V AC voltage, suitable for circuit protection in various applications. With dimensions of 15.4mm x 5.35mm x 5.35mm, it has a rated breaking capacity of 1500A and operates b/w -55°C to 125°C temperatures, meeting CUL, UL, VDE standards.
3403.0276.23
3403.0276.23 fuse by Schurter Ag has a rated current of 1.6A and a rated AC voltage of 277V, with a nominal joule integral of 4.66J. It is a time lag electric fuse suitable for circuit protection applications, meeting standards like CUL, UL, and VDE. Dimensions are 15.4mm x 5.35mm x 5.35mm for surface mount installation in various electronic devices.
3403.0163.24
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .5 A; Terminal Shape: WRAPAROUND;
3403.0012.24
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: .4 A; Terminal Shape: WRAPAROUND;
3403.0020.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
3403.0158.11
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: .16 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved