Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Schneider Electric Sa's GV2ME14 is a 10A thermal magnetic circuit breaker with a rated AC voltage of 690V. Featuring IK04 and IP20 environmental characteristics, it has a max operating temperature of 60°C and min of -20°C. Ideal for panel or DIN-rail mounting, this circuit breaker offers a rated breaking capacity of 3000A and is suitable for various applications requiring reliable circuit protection.
Median Price
$178.400
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Farnell
1+ parts
$65.000
100+ parts
-
1k+ parts
10k+ parts
Standard Electric Supply Co.
$143.750
Master Electronics
$167.850
$161.050
Mouser Electronics
$168.690
$165.890
Newark
$176.870
DigiKey
$179.930
RS (Exports)
$180.310
RS Americas
$187.580
$150.060
Verical
$214.833
Element14
$7,657.430
Distrelec
Kempston Controls
$52.030
TME
$64.270
Omnical
$94.900
Quotebeam
$109.860
TodayComponents
$117.180
$110.000
Nova Conductors
$167.145
Galco
$183.940
IBS Electronics
$242.593
Vyrian
Amar Radio Corporation
EMSNET
Powertech Controls
J2 Sourcing AB
Fibra_Brandt Electronic GMBH
First Choice Components Inc.
Corohmni
$4.703
AZTECH Wire
$13.507
Aztec Data Supply Inc.
$13.540
Semicontronic
$55.250
$53.869
$53.592
Continental Prestige Electronics
Netroflash
Advanced Electronics
$170.488
Allen Electronics Distributors
$178.200
Argo Parts USA
RLX Solution Inc. (Excess)
High rated AC voltage makes this circuit breaker suitable for industrial applications where high voltage levels are encountered.
Compact size allows for easy installation and space-saving in electrical panels.
IK04 rating ensures protection against mechanical impacts, while IP20 rating provides protection against solids. This makes the circuit breaker durable and suitable for various environmental conditions.
High maximum operating temperature allows the circuit breaker to perform reliably even in elevated temperature environments.
High breaking capacity ensures that the circuit breaker can safely interrupt faults and protect the electrical system during overloads or short circuits.
Circuit Breaker GV2ME14 attributes and parameters. Explore more Circuit Breaker devices from Schneider Electric Sa
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Height:
Body Length/Diameter:
Body Width:
Dimensions:
Actuator Type:
Circuit Function:
No. of Poles:
Circuit Protection Type:
Minimum Operating Temperature:
Maximum Operating Temperature:
Environmental Characteristics:
Reference Standard:
Terminal Shape:
Mounting Feature:
Packing Method:
GV2ME14 Circuit Protection trade compliance attributes, and parameters.
NSN
5925-01-525-1791, 5925015251791, 6110-14-528-0384, 6110145280384
NIIN
015251791, 145280384
Our purpose is to empower all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On. Our mission is to be your digital partner for Sustainability and Efficiency. We drive digital transformation by integrating world-leading process and energy technologies, end-point to cloud connecting products, controls, software, and services, across the entire lifecycle, enabling integrated company management, for homes, buildings, data centers, infrastructure, and industries.
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
BSS138
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LL4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1554216004
Molex
WIRE AND CABLE;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
DS18B20Z
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
National Semiconductor
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
W58-XC4C12A-30
TE Connectivity's W58-XC4C12A-30 is a 30A thermal circuit breaker with 250V AC and 50V DC ratings. Featuring a quick connect terminal shape, it has a trip time of 6s and push-to-reset actuator type. Ideal for panel mounting in series trip circuits, this compact device measures 34.93mm x 16.76mm x 34.93mm, offering reliable circuit protection with a rated breaking capacity of 1000A.
2C10UL
Altech
Altech 2C10UL is a 10A circuit breaker with thermal magnetic protection, rated at 480V AC. Featuring a DIN rail mount and toggle handle actuator, it has a breaking capacity of 10000A. Ideal for industrial applications requiring reliable circuit protection in harsh environments.
W67-X2Q12-10
TE Connectivity's W67-X2Q12-10 is a 10A circuit breaker with rated AC voltage of 277V and trip time of 2.2s. Its compact dimensions (50.8mm x 19.05mm x 41.66mm) make it ideal for panel mounting applications requiring standard blow characteristic and magnetic protection up to 5000A in series trip circuits.
18617
Schneider Electric Sa
THERMAL MAGNETIC;
3VA5440-1MU31-0AA0
Siemens
Siemens 3VA5440-1MU31-0AA0 is a 400A circuit breaker with IP40 rating, suitable for panel mounting. It has a rated AC voltage of 600V and thermal protection with a breaking capacity of 150kA. Ideal for industrial applications requiring reliable circuit protection in environments ranging from -25°C to 70°C.
5SY4302-8
Siemens 5SY4302-8 is a 3-pole circuit breaker with rated current of 2A and rated AC voltage of 400V. Featuring thermal magnetic protection, it has a breaking capacity of 10kA and DIN-rail mounting for easy installation. Ideal for industrial applications requiring reliable circuit protection in compact spaces.
MS3320-3
Crouzet
THERMAL CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT; Rated AC Voltage: 120 V; Rated DC Voltage: 28 V; Rated Current: 3 A; Terminal Shape: SCREW;
CA1-B2-16-435-1B1-C
Carling Technologies
Carling Technologies CA1-B2-16-435-1B1-C is a 3.5A magnetic circuit breaker with 7500A rated breaking capacity. It features corrosion/moisture resistance, stud terminal shape, and panel mount for series trip applications. Rated for -40 to 85°C, suitable for CSA/UL standards in various electrical systems.
2CU15L
The Altech 2CU15L is a 15A circuit breaker with a rated AC voltage of 480V, suitable for DIN rail mounting. Featuring thermal magnetic protection and a breaking capacity of 10kA, it is ideal for industrial applications requiring reliable circuit protection in environments with temperatures ranging from -25°C to 60°C.
BDF36125
PCG-BA-24-650-1GB-E11
Carling Technologies PCG-BA-24-650-1GB-E11 is a 240V, 50A circuit breaker with a rated breaking capacity of 3000A. Featuring a panel mount design and handle actuator, it is ideal for equipment leakage protection in various applications. Compliant with CSA and UL standards, it ensures reliable circuit protection in temperatures ranging from -35°C to 66°C.
3VA2163-5HL36-0AA0
Siemens 3VA2163-5HL36-0AA0 is a 63A thermal circuit breaker with 55000A breaking capacity. Rated at 690V, it has IP40 protection and operates b/w -40°C to 70°C. Ideal for panel mounting in circuits requiring reliable trip function.
3RV2311-1JC10
Siemens 3RV2311-1JC10 is a 690V, 10A circuit breaker with IP20 protection. Featuring a rated breaking capacity of 4000A, it operates b/w -20°C to 60°C. Ideal for DIN-rail mounting, this magnetic circuit breaker with rotary handle is suitable for various industrial applications.
GFL2D200302
Altech GFL2D200302 is a 20A magnetic circuit breaker with 240V AC voltage rating. Featuring a toggle actuator and DIN rail mounting, it has a rated breaking capacity of 10kA. Ideal for circuit protection in industrial applications meeting CUL and UL standards.
1610-21-5A
E-t-a Elektrotechnische Apparate
1610-21-5A by E-t-a Elektrotechnische Apparate is a 5A thermal circuit breaker with a rated breaking capacity of 150A. It features corrosion/moisture resistance, IP30 protection, and operates b/w -40°C to 85°C. Ideal for inline mounting in UL-compliant applications requiring trip-free circuit protection.
3D1UR
The Altech 3D1UR is a thermal magnetic circuit breaker with rated AC voltage of 480V and rated current of 1A. It features an actuator type toggle, DIN rail mounting, and IP20 environmental protection. Ideal for industrial applications requiring reliable circuit protection in harsh environments.
W31-X2M1G-25
TE Connectivity's W31-X2M1G-25 is a 25A thermal circuit breaker with 240V AC and 50V DC ratings. Featuring a 6-second trip delay, it is corrosion, environment, and moisture resistant. Ideal for panel mounting applications requiring series trip circuit protection.
CA1-B0-14-673-321-I
CA1-B0-14-673-321-I by Carling Technologies is a 73A magnetic circuit breaker with a rated breaking capacity of 1500A. With corrosion/moisture resistance, it has a max operating temperature of 85°C and min of -40°C. Ideal for panel mounting in applications requiring reliable series trip circuit protection.
FAZ-B10/2
Eaton Corporation
Eaton Corporation's FAZ-B10/2 circuit breaker is rated for 480V AC and 96V DC with a 10A current. With a short blow characteristic, it offers thermal magnetic protection and a breaking capacity of 15000A. Ideal for manual on/off control in various applications, it meets standards like CCC, CE, CSA, IEC, UL, and VDE.
M9F23203
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GV2ME146
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 10 A; Terminal Shape: SCREW AND SNAP ON; Environmental Characteristics: IK04; IP20;
GV2ME05
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: DIN RAIL AND PANEL MOUNT; Rated AC Voltage: 690 V; Rated Current: 1 A; Terminal Shape: SCREW AND SNAP ON; Rated Breaking Capacity: 100000 A;
GV2ME143
Schneider Electric Sa's GV2ME143 is a 10A thermal magnetic circuit breaker with a rated AC voltage of 690V. With dimensions of 78.2mm x 45mm x 101mm, it features an actuator type push button and can be mounted on panels or DIN-rails. Ideal for circuit protection in industrial applications, it has a rated breaking capacity of 3000A and operates within temperatures ranging from -20°C to 60°C.
GV2ME14AE11TQ
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 10 A; Terminal Shape: SCREW AND SNAP ON; Body Length/Diameter: 89 mm;
GV2ME14TQ
GV2ME06
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 1.6 A; Terminal Shape: SCREW AND SNAP ON; Environmental Characteristics: IK04; IP20;
GV2ME07
The Schneider Electric Sa GV2ME07 is a circuit breaker with a rated AC voltage of 690V. It has a compact body size of 79.2mm x 45mm x 89mm and can be mounted on DIN rail or panels. With a thermal magnetic circuit protection type and a rated breaking capacity of 3000A, it is suitable for various applications requiring reliable circuit protection.
GV2ME16
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 14 A; Terminal Shape: SCREW AND SNAP ON; Maximum Operating Temperature: 60 Cel;
GV2ME053
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 1 A; Terminal Shape: SCREW AND SNAP ON; Minimum Operating Temperature: -20 Cel;
GV2ME056
GV2ME05TQ
GV2ME20
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 18 A; Terminal Shape: SCREW AND SNAP ON; Body Height: 78.5 mm;
GV2ME22
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 25 A; Terminal Shape: SCREW AND SNAP ON; Circuit Function: TRIP;
GV2ME223
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 25 A; Terminal Shape: SCREW AND SNAP ON; Packing Method: BULK;
GV2ME01
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: DIN RAIL AND PANEL MOUNT; Rated AC Voltage: 690 V; Rated Current: .16 A; Terminal Shape: SCREW AND SNAP ON; Environmental Characteristics: IK04; IP20;
GV2ME213
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 23 A; Terminal Shape: SCREW AND SNAP ON; Actuator Type: PUSH BUTTON;
GV2ME013
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: .16 A; Terminal Shape: SCREW AND SNAP ON; Body Height: 78.5 mm;
GV2ME08AE11TQ
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 4 A; Terminal Shape: SCREW AND SNAP ON; Maximum Operating Temperature: 60 Cel;
GV2ME07AE11TQ
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 2.5 A; Terminal Shape: SCREW AND SNAP ON; Maximum Operating Temperature: 60 Cel;
GV2ME16AE11TQ
THERMAL MAGNETIC CIRCUIT BREAKER; Mounting Feature: PANEL MOUNT/DIN-RAIL MOUNT; Rated AC Voltage: 690 V; Rated Current: 14 A; Terminal Shape: SCREW AND SNAP ON; Body Length/Diameter: 89 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved